The team wanted to give gun makers a recoil pad that would perform two-fold, providing both comfort and superior recoil damping benefits, while also standing up to rigorous wear and tear.

Its portfolio of OnColor™ polymer colorants was developed to improve the heat and long-term color stability of cautionary orange polymers for high-voltage EV connectors, offering the following benefits: • Long-term fading resistance in thermal aging tests at up to 130°C for 1,000 hours, • No migration, excellent processing stability • Lower corrosion risk vs. typical comparable colorants • No impact on flame retardancy and limited adverse effects on essential mechanical characteristics, including flexural and impact strength Avient’s orange nylon colorants are available in several validated RAL, Pantone, and JPMA orange shades for compounding, injection molding, and extrusion.

MARKETS & APPLICATIONS • Thermoformed, APET food packaging, including: - Hot steam sterilization - Hot fill - Microwave use • Polyester • Sheet extrusion & thermoforming KEY CHARACTERISTICS • Suitable for hot steam sterilization, hot fill, and microwave applications • Ideal for food-grade containers with high rigidity and improved gas barrier • Can withstand temperatures up to 100°C • Available in both transparent and opaque options • Processable on existing thermoforming lines with heated molds KEY BENEFITS • A fully circular monomaterial, up to 100% rPET polymer content • Promotion of the circularity of PET and the resulting packaging is possible • Helps customers to comply with the Packaging and Packaging Waste Regulation (PPWR) that demands recyclability of all packaging with binding PCR content targets by 2030 • Demonstrates improved productivity in comparison to CPET during thermoforming • Helps avoid possible EPR fees or penalties on difficult-to-recycle packaging PRODUCT BULLETIN Copyright © 2025, Avient Corporation.

i) If Buyer is in default of performance of its obligations towards Seller and fails to provide adequate assurance of Buyer’s performance before the date of scheduled delivery; or (ii) if Seller has reasonable doubts with respect to Buyer’s performance of its obligations and Buyer fails to provide to Seller adequate assurance of Buyer’s performance before the date of scheduled delivery and in any case within thirty (30) calendar days of Seller’s demand for such assurance; or (iii) if Buyer becomes insolvent or unable to pay its debts as they mature, or goes into liquidation or any bankruptcy proceeding shall be instituted by or against Buyer or if a trustee or receiver or administrator is appointed for all or a substantial part of the assets of Buyer or if Buyer makes any assignment for the benefit of its creditors; or (iv) in case of non-compliance of Buyer with any law, statute ordinance, regulation, code or standard (“Laws and Standards”), then Seller may by notice in writing to Buyer, without prejudice to any of its other rights: (a) demand return and take repossession of any delivered Products which have not been paid for and all costs relating to the recovery of the Products shall be for the account of Buyer; and/or (b) suspend its performance or terminate its order confirmation for pending delivery of Products unless Buyer makes such payment for Products on a cash in advance basis or provides adequate assurance of such payment for Products to Seller. Buyer intends that its indemnification obligations for claims related to or brought by anyone directly or indirectly employed by Buyer or its subcontractors will not be limited by any provision of any worker’s compensation act, disability benefit act or other employee benefit act, and Buyer hereby waives immunity under such acts to the extent it would bar recovery under or prevent enforcement of Buyer’s indemnification obligations. 16.

i) If Buyer is in default of performance of its obligations towards Seller and fails to provide adequate assurance of Buyer’s performance before the date of scheduled delivery; or (ii) if Seller has reasonable doubts with respect to Buyer’s performance of its obligations and Buyer fails to provide to Seller adequate assurance of Buyer’s performance before the date of scheduled delivery and in any case within thirty (30) days of Seller’s demand for such assurance; or (iii) if Buyer becomes insolvent or unable to pay its debts as they mature, or goes into liquidation or any bankruptcy proceeding shall be instituted by or against Buyer or if a trustee or receiver or administrator is appointed for all or a substantial part of the assets of Buyer or if Buyer makes any assignment for the benefit of its creditors; or (iv) in case of non- compliance of Buyer with any law, statute ordinance, regulation, code or standard (“Laws and Standards”), then Seller may by notice in writing to Buyer, without prejudice to any of its other rights: (a) demand return and take repossession of any delivered Products which have not been paid for and all costs relating to the recovery of the Products shall be for the account of Buyer; and/or (b) suspend its performance or terminate its order confirmation for pending delivery of Products unless Buyer makes such payment for Products on a cash in advance basis or provides adequate assurance of such payment for Products to Seller. Buyer intends that its indemnification obligations for claims related to or brought by anyone directly or indirectly employed by Buyer or its subcontractors will not be limited by any provision of any worker’s compensation act, disability benefit act or other employee benefit act, and Buyer hereby waives immunity under such acts to the extent it would bar recovery under or prevent enforcement of Buyer’s indemnification obligations. 16.

i) If Buyer is in default of performance of its obligations towards Seller and fails to provide adequate assurance of Buyer’s performance before the date of scheduled delivery; or (ii) if Seller has reasonable doubts with respect to Buyer’s performance of its obligations and Buyer fails to provide to Seller adequate assurance of Buyer’s performance before the date of scheduled delivery and in any case within thirty (30) days of Seller’s demand for such assurance; or (iii) if Buyer becomes insolvent or unable to pay its debts as they mature, or goes into liquidation or any bankruptcy proceeding shall be instituted by or against Buyer or if a trustee or receiver or administrator is appointed for all or a substantial part of the assets of Buyer or if Buyer makes any assignment for the benefit of its creditors; or (iv) in case of non- compliance of Buyer with any law, statute ordinance, regulation, code or standard (“Laws and Standards”), then Seller may by notice in writing to Buyer, without prejudice to any of its other rights: (a) demand return and take repossession of any delivered Products which have not been paid for and all costs relating to the recovery of the Products shall be for the account of Buyer; and/or (b) suspend its performance or terminate its order confirmation for pending delivery of Products unless Buyer makes such payment for Products on a cash in advance basis or provides adequate assurance of such payment for Products to Seller. Buyer intends that its indemnification obligations for claims related to or brought by anyone directly or indirectly employed by Buyer or its subcontractors will not be limited by any provision of any worker’s compensation act, disability benefit act or other employee benefit act, and Buyer hereby waives immunity under such acts to the extent it would bar recovery under or prevent enforcement of Buyer’s indemnification obligations.

i) If Buyer is in default of performance of its obligations towards Seller and fails to provide adequate assurance of Buyer’s performance before the date of scheduled delivery; or (ii) if Seller has reasonable doubts with respect to Buyer’s performance of its obligations and Buyer fails to provide to Seller adequate assurance of Buyer’s performance before the date of scheduled delivery and in any case within thirty (30) days of Seller’s demand for such assurance; or (iii) if Buyer becomes insolvent or unable to pay its debts as they mature, or goes into liquidation or any bankruptcy proceeding shall be instituted by or against Buyer or if a trustee or receiver or administrator is appointed for all or a substantial part of the assets of Buyer or if Buyer makes any assignment for the benefit of its creditors; or (iv) in case of non- compliance of Buyer with any law, statute ordinance, regulation, code or standard (“Laws and Standards”), then Seller may by notice in writing to Buyer, without prejudice to any of its other rights: (a) demand return and take repossession of any delivered Products which have not been paid for and all costs relating to the recovery of the Products shall be for the account of Buyer; and/or (b) suspend its performance or terminate its order confirmation for pending delivery of Products unless Buyer makes such payment for Products on a cash in advance basis or provides adequate assurance of such payment for Products to Seller. Buyer intends that its indemnification obligations for claims related to or brought by anyone directly or indirectly employed by Buyer or its subcontractors will not be limited by any provision of any worker’s compensation act, disability benefit act or other employee benefit act, and Buyer hereby waives immunity under such acts to the extent it would bar recovery under or prevent enforcement of Buyer’s indemnification obligations.

HAMMERHEAD™ MARINE COMPOSITE PANELS APPLICATION & INSTALLATION GUIDE PRODUCT DESCRIPTION FEATURE BENEFIT Exceptional strength-to-weight ratio Lightweight yet strong structural performance and increased payloads Resistance to UV light, chemicals, moisture degradation and rot Resistance to harsh marine conditions Tough and impact resistant Durability and long product life Dimensionally stable Consistent performance in extreme temperature and humidity fluctuations Strong adhesive properties Easy bonding to various materials FEATURE BENEFIT Ready-to-install Fewer parts & reduced scrap Large format Improved aesthetics with seamless designs Made via continuous-fiber manufacturing process Consistent quality in every panel PERFORMANCE ADVANTAGES MANUFACTURING ADVANTAGES Hammerhead™ Marine Composite Panels are made from continuous glass- fiber reinforced thermoplastic face sheets and polyester foam cores. BOTTOM PANEL LEG LENGTH BREAK STRENGTH (LBS) Hammerhead™ with 5.3 lb/ft3 Core Density 2 in 420 Hammerhead™ with 8.4 lb/ft3 Core Density 2 in 332 Marine Plywood 2 in 984 Glass/Polyester with Balsa Core 2 in 1298 Hammerhead™ with 5.3 lb/ft3 Core Density - ITW Plexus MA420 Adhesive NA 501 Hammerhead™ with 8.4 lb/ft3 Core Density - ITW Plexus MA420 Adhesive NA 1156 Hammerhead™ with 8.4 lb/ft3 Core Density - Crestomer 1152PA Adhesive NA 1530 Hammerhead™ with 8.4 lb/in3 Core Density - Crestomer M1-30 Adhesive NA 1471 ADHESIVE DESCRIPTION ADHESIVE GRADE MANUFACTURER AVERAGE BOND STRENGTH (PSI) STANDARD DEVIATION FAILURE MODE BEST ADHESION 2k Urethane 75421 Lord 2281 184 SubstrateCohesive 2k Acrylic SA1-705 GRY1 AccraLock 2211 78 Substrate 2k Acrylic Plexus MA420 ITW 2171 262 Substrate 2k Acrylic SA10-05 Blk1 AccraLock 2102 138 Substrate 2k Urethane 75451 Lord 2047 68 Cohesive 2k Acrylic SA1-705 GRY 1:2 AccraLock 1966 68 Substrate 2k Acrylic Scotchweld 8010 3M 1907 61 Adhesive Cyanoacrylate Gorilla Glue Gorilla Glue 1885 432 Cohesive 2k Acrylic Crestabond PP-04 Scott Bader 1873 281 Substrate 2k Acrylic SA10-05 Blk 10:2 AccraLock 1779 127 Cohesive 2k Urethane 75422 Lord 1716 190 CohesiveAdhesive 2k Urethane 75452 Lord 1535 98 Adhesive 2k Methacrylate Polyfuse Icon Containment 1610 98 Adhesive INTERMEDIATE ADHESION 2k Acrylic FA10-05 Blk C010817 AccraLock 724 58 Cohesive 2k Acrylic FA10-05 Blk1 AccraLock 722 44 Cohesive 2k Epoxy Loctite Epoxy Instant Mix Loctite 508 81 Adhesive 2k Epoxy Gorilla Glue Epoxy Gorilla Glue 341 198 Adhesive NOT RECOMMENDED 2k Epoxy Loctite Epoxy Marine Loctite 0 0 No bond ADHESIVE SELECTION Brands identified are owned by the manufacturers of the adhesive products. 1 surface sanded with 220 grit scuff prep 2 surface primed with 459T FASTENER TYPE BENEFITS CONSIDERATIONS Through-Bolting Best mechanical locking system Need back side access to panel Screw-In Anchor Highest pullout strength Requires pilot hole Cup Washer Spreads compressive load Requires relief hole; For substructure and hard point attachment Wide Grip (Bulb-Style) Rivet Ease of use—no installation torque limitations For lower load attachments Sheet Metal or Wood Screw Readily available, low cost Penetrate both skins for improved pullout Shoulder Washer Limits compressive load Requires relief hole; For substructure and hard point attachment For more information on installation, adhesives, and fasteners for specific applications, please contact Avient.

i) If Buyer is in default of performance of its obligations towards Seller and fails to provide adequate assurance of Buyer’s performance before the date of scheduled delivery; or (ii) if Seller has reasonable doubts with respect to Buyer’s performance of its obligations and Buyer fails to provide to Seller adequate assurance of Buyer’s performance before the date of scheduled delivery and in any case within thirty (30) days of Seller’s demand for such assurance; or (iii) if Buyer becomes insolvent or unable to pay its debts as they mature, or goes into liquidation or any bankruptcy proceeding shall be instituted by or against Buyer or if a trustee or receiver or administrator is appointed for all or a substantial part of the assets of Buyer or if Buyer makes any assignment for the benefit of its creditors; or (iv) in case of non- compliance of Buyer with any law, statute ordinance, regulation, code or standard (“Laws and Standards”), then Seller may by notice in writing to Buyer, without prejudice to any of its other rights: (a) demand return and take repossession of any delivered Products which have not been paid for and all costs relating to the recovery of the Products shall be for the account of Buyer; and/or (b) suspend its performance or rescinds, partly or completely its order confirmation for pending delivery of Products in accordance with Section 6:265 DCC unless Buyer makes such payment for Products on a cash in advance basis or provides adequate assurance of such payment for Products to Seller. Buyer intends that its indemnification obligations for claims related to or brought by anyone directly or indirectly employed by Buyer or its subcontractors will not be limited by any provision of any worker’s compensation act, disability benefit act or other employee benefit act, and Buyer hereby waives immunity under such acts to the extent it would bar recovery under or prevent enforcement of Buyer’s indemnification obligations. 16.

i) If Buyer is in default of performance of its obligations towards Seller and fails to provide adequate assurance of Buyer’s performance before the date of scheduled delivery; or (ii) if Seller has reasonable doubts with respect to Buyer’s performance of its obligations and Buyer fails to provide to Seller adequate assurance of Buyer’s performance before the date of scheduled delivery and in any case within thirty (30) days of Seller’s demand for such assurance; or (iii) if Buyer becomes insolvent or unable to pay its debts as they mature, or goes into liquidation or any bankruptcy proceeding shall be instituted by or against Buyer or if a trustee or receiver or administrator is appointed for all or a substantial part of the assets of Buyer or if Buyer makes any assignment for the benefit of its creditors; or (iv) in case of non- compliance of Buyer with any law, statute ordinance, regulation, code or standard (“Laws and Standards”), then Seller may by notice in writing to Buyer, without prejudice to any of its other rights: (a) demand return and take repossession of any delivered Products which have not been paid for and all costs relating to the recovery of the Products shall be for the account of Buyer; and/or (b) suspend its performance or terminate its order confirmation for pending delivery of Products unless Buyer makes such payment for Products on a cash in advance basis or provides adequate assurance of such payment for Products to Seller. Buyer intends that its indemnification obligations for claims related to or brought by anyone directly or indirectly employed by Buyer or its subcontractors will not be limited by any provision of any worker’s compensation act, disability benefit act or other employee benefit act, and Buyer hereby waives immunity under such acts to the extent it would bar recovery under or prevent enforcement of Buyer’s indemnification obligations.