BASE RESIN PPA PC PSU PES PPS CO- POLYMER ACETAL PEEK PA Barrel Temperatures* °F (°C) Rear Zone 550–580 (288–305) 520–560 (271–293) 600–640 (316–338) 630–660 (332–338) 550–580 (288–304) 350–370 (177–188) 660–700 (349–371) 440–490 (227–254) Center Zone 560–600 (293–316) 530–570 (277–299) 620–670 (327–354) 650–680 (343–360) 560–615 (293–324) 380–390 (193–200) 700–730 (371–388) 470–510 (243–266) Front Zone 580–620 (304–327) 550–580 (288–305) 630–680 (332–360) 670–730 (354–388) 590–630 (310–332) 390–430 (200–221) 720–750 (382–400) 490–540 (254–282) Nozzle 575–615 (302–324) 550–600 (288–316) 630–680 (332–360) 680–700 (360–371) 600–625 (316–330) 380–415 (193–213) 720–750 (382–400) 520–570 (271–300) Melt Temperature 575–615 (302–324) 560–600 (293–316) 625–675 (330–358) 650–710 (343–377) 600–625 (316–330) 370–410 (188–210) 670–740 (354–393) 520–570 (271–300) Mold Temperature 250–300 (121–150) 175–240 (80–116) 190–300 (88–150) 225–325 (107–164) 250–325 (121–164) 150–225 (66–107) 290–375 (143–190) 150–200 (66–93) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 1.0–3.0 Back Pressure psi 50 Screw Speed rpm 50–90 Drying Parameters °F (°C) 6 hrs @ 175 (80) 4 hrs @ 250 (121) 4 hrs @ 275 (135) 4 hrs @ 300 (150) 4 hrs @ 250 (121) 2 hrs @ 200 (93) 3 hrs @ 300 (150) 4 hrs @ 180 (82) Allowable Moisture % < 0.05 < 0.02 < 0.02 < 0.04 < 0.02 0.15–0.20 < 0.02 0.10–0.20 Cushion in 0.125–0.250 Screw Compression Ratio 2.5:1–3.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Reverse Taper Clamp Pressure 5–6 Tons/in2 of projected area of cavities and runner system * Barrel temperatures should be elevated for compounds designed for electrical insulative properties.

Base Resin PPA PC PSU PES PPS Co- polymer Acetal PEEK PA Barrel Temperatures* °F (°C) Rear Zone 550–580 (288–305) 550–590 (288–310) 600–640 (316–338) 630–660 (332–338) 550–580 (288–304) 350–370 (177–188) 660–700 (349–371) 440–490 (227–254) Center Zone 560–600 (293–316) 570–600 (300–316) 620–670 (327–354) 650–680 (343–360) 560–615 (293–324) 380–390 (193–200) 700–730 (371–388) 470–510 (243–266) Front Zone 580–620 (304–327) 580–630 (304–322) 630–680 (332–360) 670–730 (354–388) 590–630 (310–332) 390–430 (200–221) 720–750 (382–400) 490–540 (254–282) Nozzle 575–615 (302–324) 580–630 (304–322) 630–680 (332–360) 680–700 (360–371) 600–625 (316–330) 380–415 (193–213) 720–750 (382–400) 520–570 (271–300) Melt Temperature 575–615 (302–324) 580–625 (304–330) 625–675 (330–358) 650–710 (343–377) 600–625 (316–330) 370–410 (188–210) 670–740 (354–393) 520–570 (271–300) Mold Temperature 250–300 (121–150) 175–240 (80–116) 190–300 (88–150) 225–325 (107–164) 250–325 (121–164) 190–250 (88–121) 290–375 (143–190) 150–200 (66–93) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 1.0–3.0 Back Pressure psi 50 Screw Speed rpm 50–90 Drying Parameters °F (°C) 6 hrs @ 175 (80) 4 hrs @ 250 (121) 4 hrs @ 275 (135) 4 hrs @ 250 (121) 3 hrs @ 300 (150) 2 hrs @ 200 (93) 3 hrs @ 275 (135) 4 hrs @ 180 (82) Cushion in 0.125–0.250 Screw Compression Ratio 2.5:1–3.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Reverse Taper Clamp Pressure 5–6 Tons/in2 of projected area of cavities and runner system * Barrel temperatures should be elevated for compounds designed for electrical insulative properties.

COLORANT DISPERSIONS RUBBER COLORANT DISPERSIONS Stan-Tone™ MB/MC & EP Stan-Tone™ MB/MC & EP are pigment dispersions for rubber systems, available in customizable binder systems suited for nitrile, EPR, EPDM, SBR, natural rubber, CPE and EVA compounds Applications: industrial goods, auto mats, rubber flooring, sponge rubber, wire and cable URETHANE COLORANT DISPERSIONS Polyester Urethane Paste Colorants: Stan-Tone™ PEP Stan-Tone™ PEP colorants are reactive and compatible with polyester systems, reacting to become part of the final cured product Applications: cast urethane wheels, industrial rollers, rigid foams, adhesives, laminates, pultrusion, glass reinforced composites, coated fabrics Polyether Urethane Paste Colorants: Stan-Tone™ ET Stan-Tone™ ET colorants for urethane are compatible with polyether systems, reacting to become part of the final cured product Applications: flexible foam, cast-able rolls and wheels, adhesives and laminates EPOXY COLORANT DISPERSIONS Stan-Tone™ EPX Stan-Tone™ EPX consists of selected pigments dispersed in a Bisphenol A undiluted epoxy resin with an epoxide equivalent of 185 Applications: protective coatings, adhesives, epoxy flooring, electrical potting and laminates VINYL COLORANT DISPERSIONS Stan-Tone™ VC & VCP Stan-Tone™ VC and VCP are products based on single pigment or multi-pigment blends and are designed for applications in which dispersion, uniformity, compatibility and cleanliness are essential Applications: profile extrusions, decking, outdoor furniture, calendaring applications Plasticizer-Based Colorants for Vinyl Paste: Stan-Tone™ HCC Stan-Tone™ HCC dispersions consist of selected pigments dispersed in diisodecyl phthalate plasticizer (DIDP) and are designed for applications in which dispersion, uniformity, compatibility and cleanliness are essential Applications: coated fabric, vinyl sealants, adhesives, wall coverings, toys and sporting goods SILICONE COLORANT DISPERSIONS Liquid Silicone Colorants: Silcopas™ Stan-Tone™ SP or FSP (FDA-compliant) Silcotec™ SL Stan-Tone™ HC Plus LSR (class VI certified) Silicone paste colorants are single pigment or custom- made dispersions using a silicone carrier specially developed for liquid silicone rubber (LSR) injection molding applications Applications: infant care, toys, seals, gaskets and medical equipment High Consistency Silicone Rubber Colorants: Silcogum™ Silcotec™ S Stan-Tone™ SMB Stan-Tone™ HC Plus HCR (class VI certified) Silicone rubber colorants are made with a silicone elastomer gum binder resulting in cuttable masterbatches or slabs for ease of handling, especially for 2-roll, open-mill mixing Applications: mechanical seals, keypads, gaskets, wire and cable jacketing Room Temperature Vulcanization Colorants: Silcopas™ RTV and Stan-Tone™ SP Silcopas™ RTV and Stan-Tone™ SP colorants offer a standard line of single pigment or custom made dispersions using a low viscosity dimethyl fluid specially developed for room temperature vulcanization (RTV) rubber Applications: caulks, sealants, adhesives WATER-BASED COLORANT DISPERSIONS Water-Based Liquid Colorants: Stan-Tone™ WDN Stan-Tone™ WDN water dispersions are high-solids organic or inorganic pigment dispersions designed to help meet standards for dispersion including pH levels and strength and shade Applications: dipped latex balloons and gloves, coatings and adhesive systems ADDITIVE DISPERSIONS AQUEOUS ADDITIVE DISPERSIONS Aquamix™ Aquamix™ chemical dispersions are a full line of dispersed and emulsified curatives, antioxidants, fillers, vulcanizers, optical brighteners, flame retardants, UV stabilizers and tackifiers Applications: adhesives and latex compounding, curatives SILICONE ADDITIVE DISPERSIONS Electrically Conductive Additives for Silicone: Silcosperse™ EC Silcosperse™ EC electrically conductive additives provide high conductivity and lower filler loadings Applications: resistors, printable electronics, flexible electronics, insulator depolarizers Laser Marking Additives for Silicone: Silcosperse™ LM Silcosperse™ LM laser marking additives are dispersions that contain laser absorbers and color formers that eliminate the need for secondary etching Applications: medical device housings, electronic device housings, wire and cable jacketing Peroxide Additives for Silicone: Silcocat™ Silcocat™ dispersions can improve silicone molding process by stabilizing silicone peroxide compound levels Applications: automotive hoses, seals, gaskets Heat Stabilizer Additives for Silicone: Silcosperse™ The Silcosperse™ family of heat stabilizing additives provide a high quality dispersion into silicone designed to enhance heat resistance of silicone compounds Mold Release Additives for Silicone: Silcosperse™ IMR Silcosperse™ IMR is an internal mold release dispersion designed to be added to the silicone or fluorosilicone compound to facilitate the de-molding of finished parts Acid Acceptor Additives for Silicone: Silcosperse™ 180 Silcosperse™ 180 acid acceptor is a premium dispersion used to neutralize acid by-products generated by certain peroxides Viscosity Modifiers for Silicone: Silcosperse™ 237 Silcosperse™ 237 modifier dispersions are designed to raise or control the viscosity without changing solid content SPECIALTY PRODUCTS DRY POWDER COLORANTS Stan-Tone™ D and Stan-Tone™ DC Stan-Tone™ D and Stan-Tone™ DC are dry powder pigments available in a range of hues and chemical types WET OR DRY BLEND COLORANTS Stan-Tone™ DB Stan-Tone™ DB dry blend colorants provide enhanced performance over dry colors, resulting in uniform critical pigment weight ratios for improved color control SELF-BONDING SILICONE Silcotec™ SCB Silcotec™ SCB self-bonding silicone solutions allow silicone to bond to various substrates without prime coating To learn more about our colorant & additive dispersions, please contact us at +1.844.4AVIENT (1.844.428.4368) or visit www.avient.com.

Seller has based any recommendations to Buyer for the use of the Product upon information that Seller considers reliable, but Seller makes no warranty as to any results Buyer might obtain in Buyer’s use(s) for the Product.

Figure 1 Surface energy of various thermoplastic elastomers with rigid thermoplastics Engineering Plastics Polyamide 6,6 ABS Polycarbonate Acrylic Polystyrene Polypropylene Polyethylene Elastomers COPA TPU COPE S-TPE TPV mPE Surface Energy (mN/m) 46 43 40 37 34 31 28 Figure 2 Schematic diagram of the peel test Table I Physical property of TPE-1 Shore A Hardness (10 second delay) 44 Specific Gravity (g/cm3) 0.90 Color Natural 300 % Modulus (PSI) 348 Tensile Strength (PSI) 603 Elongation at Break (%) 598 Tear Strength (lbf/in) 110 Table II Adhesion value of TPE-1 on different substrates Substrate Average Peel Strength (lbf) Failure Type PP 17 Cohesive Copolyester 13 Adhesive PET 13 Adhesive PPE/HIPS 18 Adhesive PMMA 15 Adhesive PS 18 Adhesive PC 17 Adhesive PC/ABS 14 Adhesive HIPS 13 Adhesive ABS 13 Adhesive Table III Properties and peel strength of TPE-2 materials 15.37Nylon 11.16.5POM 227Polyester 22.619PC/ABS 24.5-ABS 20.828PP Peel Strength (PIL) 713721Tensile Elongation (%): 10811010Tensile Strength (psi): 5651Hardness: BA 15.37Nylon 11.16.5POM 227Polyester 22.619PC/ABS 24.5-ABS 20.828PP Peel Strength (PIL) 713721Tensile Elongation (%): 10811010Tensile Strength (psi): 5651Hardness: BA Figure 3 Capillary viscosity of TPE-1 and -2 at 200°C 1.00E+00 1.00E+01 1.00E+02 1.00E+03 1.00E+01 1.00E+02 1.00E+03 1.00E+04 1.00E+05 Shear rate (1/sec) V is co si ty ( P a* se c) TPE-1 TPE-2A TPE-2B GLS Corporation Abstract Introduction Experimental Material Two classes of “universal overmolding TPEs” have been developed and used in this study.

RENOL™ UL94 COMPLIANT MASTERBATCHES HOW TO USE THE TABLES UL HB GENERIC RESIN TYPE FLAME RATING MINIMUM THICKNESS (MM) MAXIMUM LET-DOWN RATIO Acetal Copolymer (POM) HB 1.50 1:20 Acrylonitrile Butadiene Styrene (ABS) HB 1.50 1:10 Ethylene Propylene Thermoplastic Rubber (EPTR) HB 1.50 1:20 High Impact Polystyrene (HIPS) HB 1.50 1:10 Liquid Crystal Polymer (LCP) HB 0.83 1:10 Polyamide (PA) HB 3.20 1:33 Polyamide (PA66 and PA 4/6) HB 0.81 1:20 Polyamide 6 (PA6) HB 0.75 1:25 Polyamide 66 (PA66) HB 0.40 1:40 Polybutylene Terephthalate (PBT) HB 0.81 1:20 Polybutylene Terephthalate/Polycarbonate (PBT/PC) HB 1.50 1:10 Polycarbonate (PC) HB 1.50 1:15 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) HB 1.50 1:20 Polycarbonate/Polyethylene Terephthalate (PC/PET) HB 1.50 1:20 Polyethylene (PE) HB 1.50 1:50 Polyethylene Terephthalate (PET) HB 0.80 1:16.7 Polyketone HB 1.50 1:20 Polymethyl Methacrylate (PMMA) HB 3.00 1:25 Polypropylene (PP) HB 1.50 1:15 Polystyrene (PS) HB 0.83 1:15 Polyurethane (PUR) HB 1.50 1:25 Polyvinylchloride (PVC) HB 1.50 1:20 Styrene Acrylonitrile (SAN) HB 1.50 1:20 Thermoplastic Elastomer (TPE) HB 0.75 1:25 UL94 V-0, V-1, V-2 ASCEND GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide 66 (PA66) 21X1(a)(f2), 21SPC1(a)(f2), 21SPF1(a)(f2), 21SPG1(a)(f2), 21SPM1(a)(f2), 20NSP1(a)(f2) 0.75 V-2 1:40 22HSP(e) 0.75 V-2 1:40 64C-R 3.0 V-2 1:50 ECO366(e) 0.4 V-0 1:40 ECO366H(e) 0.2 V-0 1:25 FR350J 0.4 V-0 1:25 20NSP(a)(f2), 21SPF(a)(f2), 21SPM(a)(f2), 21SPC(a)(f2) 0.4 V-2 1:40 20NSP(a)(h)(f2), 21SPF(a)(h)(f2), 21SPM(a)(h)(f2), 21SPC(a)(h) (f2) 1.5 V-2 1:20 Polyamide 66/6 (PA66/6) ECO315(e), ECO315J(e) 0.4 V-0 1:40 M344 3.0 V-0 1:25 909 0.75 V-0 1:25 UL94 V-0, V-1, V-2 BASF GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide 6 (PA6) 8202(t1), 8202 Blend (t1) 0.71 V-2 1:25 8202C(t1), 8202C BLEND (t1) 1.50 V-2 1:25 8202CHS(t1) (t3), 8202C HS Blend 1.50 V-2 1:25 8202HS(t1) 1.50 V-2 1:25 B3S 0.80 V-2 1:25 1.50 V-2 1:25 B3S Q661 1.50 V-2 1:25 B3S R03 1.50 V-2 1:25 8232G HSFR(t9), B3U10G5 (t9) 1.50 V-0 1:25 Polyamide 6/66 (PA6/66) C3U (m) 0.40 V-0 1:25 KR4205(m), C3U (m), C3U (t)(m) 0.40 V-0 1:25 KR4205, C3U 0.40 V-0 1:25 Polyamide 66 (PA66) 1000(b), 1310-(b), Ultramid A3K Q603(+) 1.50 V-2 1:10 A3K (o) Q790(g)(f2) 0.41 V-2 1:20 A3K(f2), A3K Q601(f2) 0.41 V-2 1:20 A3SK 0.41 V-2 1:25 A5 3.00 V-2 1:33 A3W(f1), A3W FC (f1) 0.75 V-2 1:10 A3K R01 (t)(g)(f2) 0.40 V-2 1:20 Polybutylene Terephthalate (PBT) B4406 G2 (o) Q798 1.50 V-0 1:20 B4406 G2(a), B4406 G2 (o) Q717(a) 1.50 V-0 1:20 B4406 G3 (o) Q798 1.50 V-0 1:20 B4406 G3(a), B4406 G3 (o) Q717(a) 1.50 V-0 1:20 B4406 G4 (o) Q798 1.50 V-0 1:20 B4406 G4(a2), B4406 G4 (o) Q717(a2) 1.50 V-0 1:20 B4406 G6 (o) Q798 3.00 V-0 1:12.5 B4406 G6(%) 1.50 V-0 1:20 B4406 G6(a1), B4406 G6 (o) Q717(a1), B4406 G6 (o) Q717 High Speed(a1) 1.50 V-0 1:20 B4406(a), B4406 (o) Q717(a) 1.50 V-0 1:20 B4406@ 1.50 V-0 1:20 B4450 G5, B4450 G5 (t) 0.40 V-2 1:50 Polyurethane (PUR) 11 85 A(a) FHF 000 (f2) 0.75 V-0 1:33 UL94 V-0, V-1, V-2 CELANESE GENERIC RESIN TYPE MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Liquid Crystal Polymer (LCP) A130(+), MT1310 1.50 V-0 1:40 Polyamide 66 (PA66) A3 GF 25 V0XI, A G5 FR C4 0.40 V-0 1:25 Polybutylene Terephthalate (PBT) 2012-2 1.50 V-0 1:20 2016(b) 1.50 V-0 1:20 3112-2 1.50 V-0 1:20 3116(b) 1.50 V-0 1:20 3216(b) 1.50 V-0 1:20 3310-2(f2) 1.50 V-0 1:20 3311-3(f2) 1.50 V-0 1:20 3316(b) 1.50 V-0 1:20 3316(b), 3316HF 1.50 V-0 1:20 COVESTRO GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polycarbonate (PC) 2407 + (z)(f1) 0.75-2.60 V-2 1:10 2807 + MAS183 0.75 V-2 1:25 6455 + (z) 3.00 V-0 1:25 1.50 V-2 1:25 6485 + (z)(f1) 1.50 V-0 1:25 Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) FR110 + 1.50 V-0 1:33 FR3005 HF + (z), FR3005 HF + BBS314 1.50 V-0 1:12.5 FR3010 + (z) 3.00 V-0 1:25 1.50 V-0 1:25 FR3010 HF + 3.00 V-0 1:25 FR3030 + 3.00 V-0 1:25 UL94 V-0, V-1, V-2 DSM GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide 46 (PA46) TE250F6(h1)( j) 0.50 V-0 1:25 Polyamide 6 (PA6) F223-D(f1), F223-D /A(f1) 0.75 V-2 1:25 K222-KGV5(f1) 0.75 V-2 1:16.7 1.50 V-2 1:16.7 K-FKGS6/B(f1)(y) 0.80 V-0 1:25 Polyamide 66 (PA66) SG-KGS6/HV 0.75 V-0 1:25 Thermoplastic Elastomer (TPE) PL460-S 1.60 V-0 1:25 Polyamide 4T (PA4T) T11 (h) 0.40 V-0 1:20 DOMO GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide (PA) J 60X1 V30 0.40 V-0 1:25 Polyamide 6 (PA6) PSB 286 0.80 V-2 1:25 3.00 V-2 1:25 Polyamide 66 (PA66) A 205F(r4) 0.38 V-2 1:25 A 225F 0.75 V-2 1:25 A 50H1 (r3)(f2) 0.40 V-0 1:25 A 30G1 0.40 V-0 1:25 DUPONT UL94 V-0, V-1, V-2 GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide (PA) 132F(+)(f1), 135F(+)(f1) 0.75 V-2 1:20 HTNFR42G30NH 0.40 V-0 1:25 Polyamide 6/12 (PA6/12) 151, 151L 1.50 V-2 1:25 Polyamide 66 (PA66) 101(r9)(f1), 101F(r9)(f1), 101L(r9)(f1), E101(r9)(f1), E101L(r9)(f1) 0.75 V-2 1:20 103FHS(+), 103HSL(+), RN5077E(+), E103HSL(+) 0.75 V-2 1:20 A428 0.75 V-0 1:20 FE3757(+) 0.75 V-2 1:25 FR15(+) 0.75 V-0 1:20 FR50(+)(f1) 0.35 V-0 1:20 FR7025V0F(+) 0.50 V-0 1:33 Polyamide 66/6 (PA66/6) FR72G25V0 0.80 V-0 1:25 Polyamide 66/6T (PA66/6T) FR95G25V0NH 0.40 V-0 1:25 Polyamide 6T/66 (PA6T/66) HTNFR52G15AL 0.75 V-0 1:33 HTNFR52G30BL(r3) 0.75 V-0 1:33 HTNFR52G30L(+), FE15502(+), HTNFR52G30AL(+) 0.75 V-0 1:33 HTNFR52G30NH(r6) 0.40 V-0 1:25 0.75 V-0 1:10 HTNFR52G35BL 0.75 V-0 1:25 HTNFR52G35L(+), HTNFR52G35AL 0.75 V-0 1:33 Polyamide 6T/ MPMDT HTNFR51G35L(+) 0.81 V-0 1:33 Polybutylene Terephthalate (PBT) LW9030FR 1.50 V-0 1:25 S650FR 1.50 V-0 1:25 SK642FR 1.50 V-0 1:25 SK652FR1 1.50 V-0 1:16.5 T841FR (r4) 1.50 V-0 1:25 Polyethylene Terephthalate (PET) FR530(l)(+)(f1), FR530L(l)(+)(f1) 0.75 V-0 1:25 Thermoplastic Elastomer (TPE) HTR8068 1.60 V-0 1:25 UL94 V-0, V-1, V-2 EXXONMOBIL GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Ethylene Propylene Thermoplastic Rubber (EPTR) 251-80W232(f7) 1.50 V-2 1:20 251-92W232 1.50 V-0 1:20 251-70W232 1.50 V-0 1:10 1.00 V-2 1:10 LANXESS GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyamide 6 (PA6) B30S+(f1) 1.50 V-2 1:25 B31SK+ 1.50 V-2 1:25 Polybutylene Terephthalate (PBT) B4235+ 1.50 V-0 1:10 TP364-302+, BF4232+(f1) 0.75 V-0 1:25 UL94 V-0, V-1, V-2 SABIC GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polybutylene Terephthalate (PBT) 310(w) 1.50 V-0 1:20 310SE0(w) 1.50 V-0 1:20 310SE0(w),310SE0R(w) 1.50 V-0 1:20 420SE0(f1)(w)(GG)(rr1) 1.50 V-0 1:20 420SE0(f1)(w)(GG)(rr2) 1.50 V-0 1:20 457(w) 1.50 V-0 1:20 457(w), 451(w) 1.50 V-0 1:20 553(a)(f1)(w) 1.50 V-0 1:20 553(a)(f1)(w), 553E(a)(f1)(w), 553U(a)(f1)(w) 1.50 V-0 1:20 553(w)(f1), 553M(w)(f1) 1.50 V-0 1:20 DR48(w) 1.50 V-0 1:20 DR48,DR48M 1.50 V-0 1:20 V4760(a2) 0.40 V-0 1:20 EXVX1259, ENH4550 0.40 V-0 1:20 771 0.75 V-0 1:25 Polybutylene Terephthalate/ Polycarbonate (PBT/PC) 357(f1)(w)(IC), 357M(f1)(w)(IC), 357U(f1)(w)(IC) 1.50 V-0 1:20 357(f1)(w)(IC), 357U(f1)(w)(IC) 1.50 V-0 1:20 357X(f1) 1.50 V-0 1:20 V3900WX(GG)(f1)(IA), V3901WX(GG)(f1)(IA) 3.00 V-0 1:20 1.50 V-0 1:20 357(w)(f2)(IC), 357M(w)(f2)(IC), 357U(w)(f2)(IC) 1.50 V-0 1:20 UL94 V-0, V-1, V-2 SABIC GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polycarbonate (PC) 221(f2) 1.50 V-2 1:25 221R(f2) 1.50 V-2 1:25 500(f2), 500R(f2) 3.00 V-0 1:33 503(f1) 3.00 V-0 10:1 1.50 V-0 10:1 503(f1), 503R(f1) 3.00 V-0 10:1 1.50 V-0 10:1 943(ab) 1.50 V-0 1:20 943(f1) 1.50 V-0 1:20 943(f1), 923(f1) 1.50 V-0 1:20 950A, 920ASR, FXD911A(GG), 940ASR 1.50 V-2 1:25 CFR7630(f1)(gg*) 1.50 V-0 1:25 ML5139R(f2) 3.00 V-0 1:33 950A, FXD911A(GG), 940ASR 3.00 V-0 1:25 943 1.50 V-0 1:20 920A 3.00 V-0 1:25 1.50 V-2 1:25 Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) C2950 1.50 V-0 6:100 C6200(GG) 2.00 V-0 1:20 Acrylonitrile Styrene Acrylate/ Polycarbonate (ASA/PC) HRA222 (GG) 0.80 V-2 1:20 UL94 V-0, V-1, V-2 SOLVAY OTHERS GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO Polyphenyl Sulfone (PPSU) R-5100 (r1)(##), R-5000 (r1)(##) 1.50 V-0 1:10 Polyphthalamide (PPA) AFA-4133 V0(+) (*) 0.75 V-0 1:25 BASE RESIN MANUFACTURER GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO ALBIS Polypropylene (PP) PP 13 CV2 14 1.50 V-2 1:25 AVIENT Polyvinylchloride (PVC) M3700(X), M3755(X) 1.50 V-0 1:25 M3900 1.50 V-0 1:25 CHI MEI Acrylonitrile Butadiene Styrene (ABS) PA-765(+) 1.50 V-0 1:10 Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) PC-510(+) 1.50 V-0 1:25 EMS-CHEMIE Polyamide 6 (PA6) Grilon A 26 V0 0.75 V-0 1:25 FORMOSA Polycarbonate (PC) #1700+(f2) 0.36-0.42 V-2 1:50 GEON Polyvinylchloride (PVC) 85891(f1) 1.70 V-0 1:20 85891(f2) 1.70 V-0 1:20 M3700(X) 1.50 V-0 1:25 M3900 1.50 V-0 1:10 1:25 INEOS Polystyrene (PS) 855 HV 3.00 V-1 100:4 INVISTA Polyamide 66 (PA66) FRU4800 XHL (r1) 0.40 V-0 1:25 U4820L (r1) 0.40 V-2 1:25 UL94 V-0, V-1, V-2 OTHERS BASE RESIN MANUFACTURER GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO KINGFA Polyamide 66 (PA66) PA66-R11G25 (##) 0.25 V-0 1:25 KURARAY Polyamide 9T (PA9T) GP2300S 0.40 V-0 1:25 LG CHEM Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) LUPOY GP-5106-F 3.00 V-0 1:20 LOTTE CHEMICAL Acrylonitrile Butadiene Styrene (ABS) VH-0800(+) 1.50 V-0 1:25 Polycarbonate (PC) HN-1064(+) 0.75 V-2 1:10 1.50 V-0 1:10 1.20 V-1 1:10 Polystyrene (PS) VH-1800+ 3.00 V-0 1:25 1.50 V-0 1:25 MITSUBISHI Polycarbonate (PC) S-2000+(f1) 1.50-1.80 V-2 1:10 POLYMER PRODUCTS Polystyrene (PS) ZYNTAR 351 2.00 V-0 1:20 1.50 V-0 1:20 ZYNTAR 7000 2.00 V-0 1:25 ZYNTAR 702 2.00 V-0 1:25 8020 2.00 V-0 1:20 8120 2.00 V-0 1:20 8130 1.50 V-0 1:20 POLYMER RESOURCES Polycarbonate (PC) PC-FR1A-D, PC- FR2A-D, PC-FR3A-D 3.00 V-0 1:33 1.50 V-2 1:33 SUMITOMO Liquid Crystal Polymer (LCP) E6007LHF(ra) 0.30 V-0 1:25 E6007LHF-MR(gt) 0.20 V-0 1:12.5 UL94 V-0, V-1, V-2 OTHERS BASE RESIN MANUFACTURER GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING MAXIMUM LET-DOWN RATIO TORAY Polyamide 6 (PA6) 1017 1.60 V-2 1:16.5 Polyamide 66 (PA66) 3004-V0(rr), CM3004-V0(rr) 0.40 V-0 1:25 TRINSEO Polycarbonate (PC) 891(w) 1.10 V-0 1:25 WELLMAN Polyamide 66/6 (PA66/6) 220-N, 21L-N, 22L-N 1.50 V-2 1:25 WESTLAKE Polyvinylchloride (PVC) 6597(f1), HF-6597(f1) 1.50 V-0 1:25 SP-7107 (f1)(a) 3.00 V-0 1:25 5VA AND 5VB BASE RESIN MANUFACTURER GENERIC RESIN TYPE SPECIFIC BASE RESIN MINIMUM THICKNESS (MM) FLAME RATING COLORS MAXIMUM LET-DOWN RATIO AVIENT Polyvinylchloride (PVC) M3900 1.50 5VB ALL 1:25 WHITE 1:10 COVESTRO Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) FR3010 + (z) 3.00 5VA ALL 1:25 DUPONT Polyamide 66/6T (PA66/6T) FR95G25V0NH 1.50 5VA ALL 1:25 Polybutylene Terephthalate (PBT) LW9030FR 2.00 5VA BLACK 1:25 3.00 5VA ALL 1:25 SK642FR 1.50 5VA BLACK 1:25 GEON Polyvinylchloride (PVC) M3900 1.50 5VB ALL 1:25 WHITE 1:10 SABIC Polybutylene Terephthalate/ Polycarbonate (PBT/PC) V3900WX(GG)(f1)(IA), V3901WX(GG)(f1)(IA) 3.00 5VA ALL 1:20 1.844.4AVIENT www.avient.com Copyright © 2020, Avient Corporation.

PolyOne Corporation Page 4 PolyOne Commodity to Specialty Transformation • Volume driven, commodity producer • Heavily tied to cyclical end markets • Performance largely dependent on non- controlling joint ventures 2000-2005 2006 - 2009 2010 – 2014 2015 and beyond • Steve Newlin appointed, Chairman, President and CEO • New leadership team appointed • Implementation of four pillar strategy • Focus on value based selling, investment in commercial resources and innovation to drive transformation • Substantial EPS growth from $0.13 to all-time high of $1.80 • Shift to faster growing, high margin, less cyclical end markets • Key acquisitions propel current and future growth, as well as margin expansion • Specialty mix expands to 65% of Operating Income – strongest mix of earnings in history • Accelerating growth • Deliver consistent double digit annual EPS growth • Maintain >35% vitality index • Pursue strategic acquisitions that expand specialty offerings and geographic breadth • Invest and grow current and next generation talent PolyOne Corporation Page 5 Appliances 5% Building & Construction 12% Consumer 10% Electrical & Electronics 5% Healthcare 11% Industrial 14% Packaging 14% Transportation 20% Wire & Cable 9% Distribution 28% PP&S 20% Specialty 52% United States 69% Europe 13% Canada 7% Asia 6% Latin America 5% 2014 Revenues: $3.8 Billion End Markets 2014 Revenues: $3.8 Billion PolyOne At A Glance $13 $31 $46 $46 $87 $96 $122 $195 $242 2006 2007 2008 2009 2010 2011 2012 2013 2014 Specialty Operating Income ($M) PolyOne Corporation Page 6 Old PolyOne *Operating Income excludes corporate charges and special items 2% 34% 43% 62% 65% 69% 0% 20% 40% 60% 80% 100% 2005 2008 2010 2013 2014 Q1 2015 2020 % o f O pe ra tin g In co m e* JV's Performance Products & Solutions Distribution Specialty 80%+ Specialty OI $5M $46M $87M $195M $242M $60M Mix Shift Highlights Specialty Transformation Transformation 2020 Platinum Vision Platinum Vision PolyOne Corporation Page 7 Confirmation of Our Strategy The World’s Premier Provider of Specialized Polymer Materials, Services and Solutions Specialization Globalization Operational Excellence Commercial Excellence PolyOne Corporation Page 8 -100% 0% 100% 200% 300% 400% 500% 600% Strategy and Execution Drive Results $0.12 $0.27 $0.21 $0.13 $0.68 $0.82 $1.00 $1.31 $1.80 '06 '07 '08 '09 '10 '11 '12 '13 '14 ‘06-‘14 Adjusted EPS CAGR = 40% Adjusted EPS Share Price vs. S&P 500 PolyOne Corporation Page 9 2006 Q1 2015 2020 “Where we were” “Where we are” Platinum Vision 1) Operating Income % Specialty: Global Color, Additives & Inks 1.7% 16.2% 20%+ Global Specialty Engineered Materials 1.1% 16.3% 20%+ Designed Structures & Solutions 1.4% (2012) 2.7% 12 – 14% Performance Products & Solutions 5.5% 6.5% 10 – 12% Distribution 2.6% 5.9% 6.5 – 7.5% 2) Specialty Platform % of Operating Income 6.0% 69% 80%+ 3) ROIC 5.0% 11.4% 15% 4) Adjusted EPS Growth N/A 22 Consecutive Quarters of EPS Growth Double Digit Expansion Proof of Performance & 2020 Goals PolyOne Corporation Page 10 Platinum Vision: Pathway to Accelerated Growth Organic Sales Growth Margin Expansion Share Repurchases Acquisitions PolyOne Corporation Page 11 Innovation Drives Earnings Growth *Percentage of Specialty Platform revenue from products introduced in last five years $20 $53 2006 2014 Research & Development Spending ($ millions) Specialty Platform Vitality Index Progression* 14% 27% 2006 2014 Specialty Platform Gross Margin % 20% 44% 2006 2014 Specialty Vitality Index Target ≥ 35% PolyOne Corporation Page 12 Megatrends Aligned with Key End Markets Decreasing Dependence on Fossil Fuels Protecting the Environment Improving Health and Wellness Megatrend End Markets Globalizing and Localizing Health & Wellness Transportation Packaging Consumer PolyOne Corporation Page 13 Prototype Frame Opportunity Scale-up & Test Market Build Business Case Commercial Launch Phase 1 Phase 2 Phase 3 Phase 4 Phase 5 6 9 7 3 5 12 5 3 2 8 4 2 4 3 1 Breakthrough Platform Derivative A Rich Pipeline of Opportunity Number of Projects 14 8 18 12 22 74 Addressable Market ($ millions) $700 $600 $600 $1,900 PolyOne Corporation Page 14 60% 98% 20% 30% 40% 50% 60% 70% 80% 90% 100% 2008 Q1 2015 Pension Funding** As of 2015年3月31日 Debt Maturities & Pension Funding Net Debt / EBITDA* = 2.1x $49 $317 $600 $0 $100 $200 $300 $400 $500 $600 $700 $800 2015 2020 2023 Debt Maturities As of 2015年3月31日 ($ millions) Coupon Rate: 7.500% 7.375% 5.250% ** includes US-qualified pension plans only *TTM 3/31/2015 PolyOne Corporation Page 15 Free Cash Flow and Strong Balance Sheet Fund Investment / Shareholder Return  Expanding our sales, marketing, and technical capabilities  Investing in operational and LSS initiatives  ~75% of capital expenditures fund growth initiatives Organic Growth Acquisitions Share Repurchases Dividends $0.16 $0.20 $0.24 $0.32 $0.40 $0.10 $0.20 $0.30 $0.40 $0.50 2011 2012 2013 2014 2015 Annual Dividend  Targets that expand our: • Specialty offerings • End market presence • Geographic breadth  Synergy opportunities  Adjacent material solutions  Repurchased over 500k shares in Q1 2015  Repurchased 11.8 million shares since early 2013  8.2 million shares are available for repurchase under the current authorization PolyOne Corporation Page 16 PolyOne Core Values Innovation Collaboration Excellence PolyOne Corporation Page 17 The New PolyOne: A Specialty Growth Company Why Invest In PolyOne?

Seller has based any recommendations to Buyer for the use of the Product upon information that Seller considers reliable, but Seller makes no warranty as to any results Buyer might obtain in Buyer’s use(s) for the Product. El Vendedor ha basado sus recomendaciones al Comprador para el uso del Producto en la información que el Vendedor considera confiable, pero el Vendedor no garantiza ningún resultado que el Comprador pudiera obtener mediante el/los uso(s) del Producto por el Comprador.

TERMS AND CONDITIONS These Terms and Conditions govern the sale of Products (“Product(s)”) to another (“Buyer”) by Avient Corporation and its affiliates (“Seller”). 1. Seller has based any recommendations to Buyer upon information that Seller considers reliable, but Seller makes no warranty as to any results Buyer might obtain in Buyer’s use(s) for the Product.

Other common types of TPEs are TPR (thermoplastic rubber) and S-TPEs (styrenics).