This literature shall NOT operate as permission, recommendation, or inducement to practice any patented invention without permission of the patent owner. 1.844.4AVIENT www.avient.com System Syncure XLPE S200FH Syncure XLPE S200FV Applications Building Wire, Tray Cable, Service Entrance Building Wire, Tray Cable, Service Entrance Specification UL 44 UL 44 Wire Type RHW-2, RHW, RHH, XHHW-2, XHH, XHHW, SIS RHW, RHH, RHW-2 Components 78% S1054A 22% SC5400-0002 RoHS MB ALT FR 50% S1054A 50% SC5400-0003 RoHS MB ALT FR Features Horizontal Flame, DBDPE-free VW-1, DBDPE-free General Properties Specific Gravity (g/cm3) 1.01 1.31 Hardness Shore D, 10sec 47 48 Gel % 68 70 Tensile Properties Tensile Strength (psi) 2800 3200 Elongation % 400 470 Tensile Retention % 95 100 Elongation Retention % 90 93 Electrical Dielectric Strength (V/mil) 1000 1200 Dielectric Constant 2.31 2.61 Dissipation Factor % 0.0012 0.0043 Thermal Temperature Rating °C 90 90 Heat Deformation % 10 5 TECHNICAL PROPERTIES

Designers conceptualized a new, larger version of the Soldier’s model, including 10 tools, a lock blade that can be opened with one hand and, importantly, a non-slip handle manufactured from a combination of hard and soft thermoplastics.

TEMPERATURE DISTRIBUTION DIAGRAM • Test Method: FTTS-FA-010-2007 4.2 • Equipment: Thermovision • Heat Source: 500W Halogen Lamp • Heat Distance: 100 cm Surface temperature before exposure: 20.22°C Surface temperature after 10 min exposure: 33.85°C Temperature change: +13.6°C Added Cesa Fiber Additives for heat preservation TEST METHOD STANDARD REQUEST TEST RESULT GB/T30127 Far infrared radiation properties Far infrared emissivity ≥0.88 (5-14um) (Test temperature: 34°C) 0.9 Far infrared radiation temperature rise ≥ 1.4°C 9°C GB/T 18319-2019 Thermal retention with accumulated by infrared ray Maximum temperature rise ≥ 6°C 8.9°C Mean temperature rise ≥ 4.4°C (20 minutes) 5.6°C FTTS-FA-010 Infrared radiation properties & thermal retention temperature rise Average emissivity ≥ 0.8 (2-22um) (Test temperature: 25°C) 0.8 Specified heating ΔT ≥ 0.5°C (relative to the standard) +5.34°C (ΔT) GB/T 11048-2008 Method A Thermal transmittance Unit: clo Naked body: 0 Underwear: 0.04 T-shirt: 0.09 Thick sweater: 0.35 Winter coat: 0.7 All the data above are the reference value 0.625 Human Physiological Experiment Blood flow volume +12.9% Blood flow velocity +13.6% Blood oxygenation(%SpO2) +1.7% www.avient.com Copyright © 2023, Avient Corporation.

Versaflex™ PKG 4345, 4355, 4365 Versaflex™ PKG 4465 Versaflex™ PKG 4570 Versaflex™ PKG 4665 Hardness Shore A 45A, 55A, 65A 65A 70A 65A Regulatory* • REACH SVHC • FDA 21 CFR • EU 10/2011 • REACH SVHC • FDA 21 CFR • REACH SVHC • FDA 21 CFR • REACH SVHC • FDA 21 CFR Color Translucent Translucent Natural Natural Overmolding Bonds To Polypropylene Polypropylene Polar substrates Polar substrates Chemical Resistance • #1 for soaps • Low-cost solution for non-polar oils • #2 for soaps • Some oils • #1 for polar & non-polar oils • #1 for non-polar solvents, like isododecane • #2 for non-polar oils • Abrasion resistance * Regulatory compliance is offered for consideration only—limitations apply; please check with product stewardship.

Unlike flexible PVC, which loses flexibility over time, Avient materials do not fail over the MCCB’s service life (approximately 10 years).

You are advised to consult any further disclosures we make on related subjects in our reports on Form 10-Q, 8-K and 10-K that we provide to the

Durometer readings can either be taken instantaneously or after a specific delay time, which typically range between 5 and 10 seconds. GLS reports hardness values utilizing the 10 second reading.

Figure 10 illustrates typical runner dimensions. The typical vent size for GLS TPEs, is 0.0005" - 0.0010" (0.012 mm - 0.025 mm) with a 0.040" - 0.060" (10 mm - 15 mm) land.

Screw Speed Low–moderate Injection Velocity 1–3 inch per second Back Pressure Low–moderate Pack Pressure 60–80% of max injection pressure Hold Pressure 40–60% of max injection pressure Cool Time 10–30 seconds (depends on part geometry and dimensional stability) Residence Time Long residence times are not advised 1.844.4AVIENT www.avient.com Copyright © 2022, Avient Corporation.

KEY CHARACTERISTICS • Excellent wear resistance • Reduced friction, heat build-up, noise and vibration • Improved processability and surface finish on parts • Lower power requirements and low maintenance • Design flexibility • Reduced weight APPLICATION BULLETIN SOLUTIONS AVAILABLE LubriOne™ Portfolio PA66, PA6 and Polyketone formulations with 10%–30% glass fiber reinforcement available Lubricants & Performance Lubricant Color Performance LubriOne NN PTFE Natural Shears and creates a PTFE film transferred to the matting surface.