Information on application and use of light shield additives to protect products from light damage (Chinese language version) OnCap™ Additives for Film Processing - Process Capabilities Bulletin Thermoplastic films processing challenges and OnCap™ additives solutions

LIMITED WARRANTY Subject to paragraph 3, and unless otherwise expressly provided herein, Seller warrants good and free title and that the Product will conform to Seller's published specifications, if any, or those other quality standards and/or measurements set forth herein. Seller shall replace, free of charge, any Products which do not conform to these specifications in one or several deliveries. No modification or addition to these Terms and Conditions shall occur by the acknowledgment, release or other form submitted by Buyer containing additional or different terms or conditions, and Seller hereby gives Buyer notice of the rejection of such additional terms and conditions.

By removing the painting process, these formulations also offer additional sustainable benefits: energy use is reduced and VOCs are eliminated. Processing Guidelines Base Resin PA6 Barrel Temperatures °F °C Rear Zone 440–470 227–243 Center Zone 450–480 232–249 Front Zone 460–490 238–254 Nozzle 470–500 243–260 Melt Temperature 470–500 243–260 Mold Temperature 120–180 49–82 Pack and Hold Pressure 50–75% of Injection Pressure Injection Velocity 0.5 in/s–3 in/s 13 mm/s–76 mm/s Back Pressure 50–100 psi 3.4–6.9 Bar Screw Speed 30–70 rpm Cushion 0.25 in 6.35 mm Drying Parameters 2–4 Hours @ 180°F 2–4 Hours @ 82°C Moisture % Allowable 0.08–0.18%* Screw Type General Purpose Screw Screw Compression Ratio 2.0:1– 2.5:1 Screw L/D 20:1 Non-return Check Valve Free Flow Check Ring Nozzle Type Reverse Taper Clamp Pressure 2–3 Tons/in² Barrel Capacity 30-80% of barrel should be used * Avient suggests measuring moisture using a Karl Fischer method or Vapor Pro® moisture analyzer that titrates only for moisture.

Compared with a traditional painting process, injection-molded Artisan materials also offer additional sustainable benefits: energy use and VOC emissions are reduced by eliminating secondary painting or in-mold labeling. BASE RESIN ABS Drying Temperature 80–90°C Drying Time 2–3 Hours Barrel Temperatures °C Rear Zone 180–210 Center Zone 190–220 Front Zone 200–230 Nozzle 210–240 Mold Temperature 50–80 Screw Speed Moderate Back Pressure 3–10 bar Cushion 5–15 mm Injection Speed Low to medium Injection Pressure Moderate to high Holding Pressure 10–30% of injection pressure Screw Type General purpose Screw L/D 20:1 Screw Compression Ratio 2.0:1–2.5:1 Non-return Check Valve Free flow check ring Nozzle Type Reverse taper Barrel Capacity 30–80% of barrel should be used STARTUP & SHUTDOWN RECOMMENDATIONS Purge Compound 2–3 melt flow PP or purging compound.

Additional specialty grades span a wide durometer range and are formulated without animal derivatives for use in a broad range of applications. VERSAFLEX™ HC MEDICAL TUBING GRADES • Improve extrusion rates, achieve high service temperature performance or increase clarity in medical tubing • Traditional and bio- based formulations specifically for biopharmaceutical tubing to meet the needs for weldability and minimize extractables during processing VERSALLOY™ HC SERIES • Obtain better flow in long, thin paths and lower shrink rates versus typical TPVs with our alloys • Color easily and obtain a smooth tactile feel VERSAFLEX™ HC GASKETS & STOPPERS SERIES • Achieve no coring, good puncture and resealability in static stoppers • Meet low COF and low stiction requirements in dynamic seals VERSAFLEX™ CL E SERIES • Increase clarity and flexibility in bags, bottles and films • Mitigate risk with plasticizer-free formulations for film extrusion • Deliver excellent odor & O2 barrier performance for film extrusion INDUSTRY BULLETIN TPE HEALTHCARE PRODUCT SELECTOR GUIDE Versaflex™ HC Medical Tubing Grades Versaflex™ HC MT222 Clear 66A 0.88 14 - 334 2.30 629 4.34 898 6.19 430 220 36 ✔ ✔ High clarity, without plasticizers Versaflex™ HC MT224 Clear 75A 0.89 19 - 468 3.23 773 5.33 1360 9.40 530 321 56 ✔ ✔ Versaflex™ HC MT226 Clear 84A 0.88 20 - 606 4.17 885 6.10 1600 11.00 600 433 76 ✔ ✔ Versaflex™ HC MT317 Clear 68A 0.89 17 69 450 3.10 660 4.55 870 6.00 470 221 39 ✔ ✔ Very high service temperature Versaflex™ HC BT218 Natural 67A 0.89 19 69 381 2.60 683 4.70 1186 8.20 608 - - ✔ ✔ Weldable, kink resistant Versalfex™ HC BIO BT218 Natural 70A 0.88 18 58 416 2.87 668 4.60 1190 8.20 630 - - ✔ ✔ Weldable, kink resistant, contains 40% bio-derived content (Gen 1 biomass) Versaflex™ HC Gaskets & Stoppers Series Versaflex™ HC 2110-35N Natural 34A 0.90 19 47 145 1.00 261 1.80 400 2.76 620 97 17 ✔ ✔ Good resealing Versaflex™ HC 2110-43N Natural 43A 0.98 12 46 134 0.92 368 2.54 723 4.98 710 - - ✔ ✔ Good compression set Versaflex™ HC 2110-57B Black 59A 1.01 20 37 369 2.54 558 3.85 537 3.70 350 147 26 ✔ ✔ Low stiction Versaflex™ CL E Series Versaflex™ CL E85 Clear 84A 0.90 20 72 752 5.18 1160 8.00 1550 10.70 450 433 76 ✔ ✔ High clarity, without plasticizers; E95 also offers excellent odor & O2 barrier Versaflex™ CL E90 Clear 90A 0.90 27 73 1000 6.89 1230 8.50 1830 12.60 57 - - ✔ ✔ Versaflex™ CL E95 Clear 95A 0.90 38 71 1680 11.60 1730 11.90 2500 17.20 580 720 126 ✔ ✔ Versaflex™ HC 3810 Series Versaflex™ HC 3810-20N Natural 20A 0.88 16 54 123 0.80 185 1.30 342 2.40 650 - - ✔ - Formulated without animal derivatives, excellent colorability, translucent Versaflex™ HC 3810-30N Natural 30A 0.89 18 58 170 1.20 245 1.70 459 3.20 680 - - ✔ - Versaflex™ HC 3810-40N Natural 40A 0.88 19 59 191 1.30 275 1.90 506 3.50 670 - - ✔ - Versaflex™ HC 3810-50N Natural 50A 0.89 21 61 264 1.80 366 2.50 699 4.80 690 - - ✔ - Versaflex™ HC 3810-60N Natural 60A 0.88 24 65 459 3.20 594 4.10 790 5.40 510 - - ✔ - Versaflex™ HC 3810-70N Natural 70A 0.88 28 67 535 3.70 684 4.70 1000 6.90 570 - - ✔ - Versaflex™ HC 3810-80N Natural 80A 0.88 30 67 689 4.80 869 6.00 1390 9.60 620 - - ✔ - Versaflex™ HC 3810-90N Natural 90A 0.88 27 89 1087 7.50 1350 9.30 1890 13.00 570 - - ✔ - Versalloy™ HC 9210 Series Versalloy™ HC 9210-45N Natural 45A 0.89 19 39 160 1.10 320 2.20 484 3.33 480 100 18 - ✔ Smooth surface aesthetics Versalloy™ HC 9210-55N Natural 53A 0.89 20 44 208 1.44 335 2.31 580 4.00 610 120 21 - ✔ Versalloy™ HC 9210-70N Natural 70A 0.89 23 53 356 2.45 510 3.52 780 5.38 590 180 32 - ✔ Versalloy™ HC 9220 Series Versalloy™ HC 9220-70 Natural 70A 0.95 17 51 453 3.12 - - 643 4.43 265 208 36 ✔ ✔ ExtrudableVersalloy™ HC 9220-80 Natural 80A 0.94 18 59 553 3.67 777 5.36 945 6.52 415 208 36 ✔ ✔ Versalloy™ HC 9220-90 Natural 90A 0.94 25 55 1030 8.13 1350 9.33 1945 13.45 620 400 70 ✔ ✔ Standard Healthcare Grades Versaflex™ G2705N Natural 60A 0.88 - - - - 528 3.64 670 4.62 470 - - ✔ ✔ Natural, high strength Versaflex™ CL 2242 Clear 43A 0.89 23 - 152 1.05 294 2.02 731 5.00 780 124 22 ✔ ✔ High clarity, boilable Versaflex™ CL 2250 Clear 50A 0.89 20 - 220 1.52 337 2.32 827 5.70 770 140 25 ✔ ✔ Versaflex™ OM Series Versaflex™ OM 1040X Natural 42A 0.92 22 - 180 1.24 301 2.08 504 3.47 580 100 18 ✔ ✔ ABS/PC overmoldVersaflex™ OM 3060 Clear 59A 0.90 33 - 420 2.90 360 2.48 500 3.45 480 180 32 ✔ ✔ Versaflex™ OM 8940X-1 Clear 42A 0.91 - - 233 - 311 - 1573 - 1059 - - - - PK, COPE overmold Versaflex™ OM 4052 Natural 56A 1.01 27 - 271 - 557 - 1680 - 670 - - ✔ - Excellent chemical resistance; PK, PC, ABS, PC/ABS overmoldVersaflex™ OM 4063 Natural 54A 1.12 30 - 365 - 580 - 1640 - 670 - - ✔ - Color Hardness Specific Gravity Compression Set @ 23°C Compression Set @ 100°C 100% Modulus 300% Modulus Tensile Strength Elongation Tear Strength ISO 10993 USP VI Special Characteristics ASTM Shore A ASTM/ISO ASTM % ASTM % ASTM psi MPa ASTM psi MPa ASTM psi ISO MPa ASTM % ASTM pll ISO kN/m GENERAL PROPERTIES TENSILE PROPERTIES OTHER For further information on specific grades, review technical data sheets.

Our Cesa™ Laser Marking Additives not only contain a laser marking additive but also deliver a part’s color and can include other additives such as those for scratch or UV resistance. During processing, a laser beam activates laser sensitive additives within a masterbatch. The activation changes the molecular structure of these additives, causing a color change that provides the vivid contrast of laser marking.

In addition, this unique technology increases production efficiency by eliminating the coextrusion process used to manufacture striped catheters, as well as reducing material usage and scrap rates. NEU View formulations for cardiovascular and intravascular catheters are application-specific, incorporating medical-grade polymers, additives, color, and healthcare-centric manufacturing practices. PolyOne is exhibiting NEU View and additional advanced healthcare solutions this week at MD&M West in booth #3213. 

MANNHEIM, Germany - 2018年3月14日 - Advanced polymers, colorants, and additives from PolyOne are enabling automotive manufacturers to develop new components and technology that meet increasing demands for fuel economy and safety. Additives that help components resist scratching and marring for more durable interior surfaces In addition, PolyOne recently partnered with Integral Technologies Inc. to commercialize its long-fiber conductive ElectriPlast® material in electromagnetic and radio-frequency (EMI/RFI) shielding applications.

MANNHEIM, Germany – 2019年4月3日 – PolyOne will display its colorant and additive solutions for the automotive industry at this week’s Plastics in Automotive Engineering (PIAE) Conference in Mannheim, Germany. In addition to new colors, the company will present solutions to support design and efficient manufacturing of electric vehicles (EVs). Vehicle designers want to establish and distinguish their EV brands with exciting new colors that reflect consumers’ environmental priorities, and we’re responding to this trend with stylish options,” explained Gary Fielding, global director of marketing, Color & Additives at PolyOne.  

标题：Explore the possibilities for polymers, colorants, additives, and services with Avient at Plastimagen 2022 in Mexico City. Sustainable portfolio of polymer solutions: Colorants, additives, and specialty formulations from Avient are categorized into eight ways that facilitate sustainable outcomes. Solutions include bio-polymers, eco-conscious materials, sustainable infrastructure materials, additives to improve recycling, and more.