To solve this issue, the converter required immediate action from the sheet producer. The sheet producer began experimenting with material changes in-house, but struggled to achieve consistency of release. THE IMPACT While the OnCap Denesting additive solution was developed initially to satisfy the needs of the converter, it was so effective that the sheet producer has plans to incorporate this technology into its entire portfolio of packaging solutions.

Avient Sustainability Day - September 20, 2023 Avient Q1 2022 Earnings – April 20, 2022 Mar 20, 2014

Avient Sustainability Day - September 20, 2023 Avient Q1 2022 Earnings – April 20, 2022 Mar 20, 2020

Avient Sustainability Day - September 20, 2023 Avient Q1 2022 Earnings – April 20, 2022 Mar 20, 2013

Second quarter sales increased 5% over the prior year quarter to $1.3 billion, and adjusted EPS increased 13% (20% excluding negative foreign exchange) to $0.98.”Rose Vice President, Corporate Communications Avient Corporation +1 440-930-3162 kyle.rose@avient.com mailto:giuseppe.disalvo@avient.com mailto:giuseppe.disalvo@avient.com mailto:kyle.rose@avient.com 6 Attachment 1 Avient Corporation Summary of Condensed Consolidated Statements of Income (Unaudited) (In millions, except per share data) Three Months Ended June 30, Six Months Ended 2022年6月30日 2021 2022 2021 Sales $ 1,302.4 $ 1,235.2 $ 2,596.2 $ 2,397.5 Operating Income 129.5 108.1 258.1 228.5 Net income attributable to Avient shareholders 84.7 68.8 168.9 148.1 Basic earnings per share attributable to Avient shareholders $ 0.93 $ 0.75 $ 1.85 $ 1.62 Diluted earnings per share attributable to Avient shareholders $ 0.92 $ 0.74 $ 1.83 $ 1.60 Senior management uses comparisons of adjusted net income attributable to Avient shareholders and diluted adjusted earnings per share (EPS) attributable to Avient shareholders, excluding special items, to assess performance and facilitate comparability of results. Three Months Ended June 30, Six Months Ended 2022年6月30日 2021 2022 2021 Sales: Color, Additives and Inks $ 649.1 $ 624.4 $ 1,298.6 $ 1,233.7 Specialty Engineered Materials 243.9 240.6 488.6 457.1 Distribution 443.2 404.4 876.1 767.1 Corporate and eliminations (33.8) (34.2) (67.1) (60.4) Sales $ 1,302.4 $ 1,235.2 $ 2,596.2 $ 2,397.5 Gross margin: Color, Additives and Inks $ 193.4 $ 193.4 $ 385.5 $ 390.9 Specialty Engineered Materials 67.4 69.6 137.2 134.3 Distribution 42.9 40.1 82.2 79.4 Corporate and eliminations 0.1 (14.4) (7.4) (13.5) Gross margin $ 303.8 $ 288.7 $ 597.5 $ 591.1 Selling and administrative expense: Color, Additives and Inks $ 99.8 $ 107.1 $ 197.4 $ 215.8 Specialty Engineered Materials 30.8 32.3 60.9 62.8 Distribution 15.8 16.4 30.9 31.7 Corporate and eliminations 27.9 24.8 50.2 52.3 Selling and administrative expense $ 174.3 $ 180.6 $ 339.4 $ 362.6 Operating income: Color, Additives and Inks $ 93.6 $ 86.3 $ 188.1 $ 175.1 Specialty Engineered Materials 36.6 37.3 76.3 71.5 Distribution 27.1 23.7 51.3 47.7 Corporate and eliminations (27.8) (39.2) (57.6) (65.8) Operating income $ 129.5 $ 108.1 $ 258.1 $ 228.5 Earnings before interest, taxes, depreciation and amortization (EBITDA): Color, Additives and Inks $ 119.5 $ 111.6 $ 240.0 $ 227.7 Specialty Engineered Materials 44.3 45.4 91.8 87.4 Distribution 27.3 23.9 51.7 48.1 Corporate and eliminations (25.1) (39.0) (51.1) (63.8) Other income, net 1.4 1.2 0.8 2.7 EBITDA $ 167.4 $ 143.1 $ 333.2 $ 302.1 12 Attachment 7 Avient Corporation Reconciliation of Non-GAAP Financial Measures (Unaudited) (In millions, except per share data) Senior management uses gross margin before special items and operating income before special items to assess performance and allocate resources because senior management believes that these measures are useful in understanding current profitability levels and how it may serve as a basis for future performance.

TECHNICAL BULLETIN Characteristics Artisan™ Nylon Solution Painted Metal Painted Plastic Traditional Molded-in Color Impact Modified Nylon PA Ionomer Alloy Aesthetic Very Good Excellent Excellent Good Very Good Very Good Scratch Appearance Excellent Poor Poor Good Excellent Excellent Scratch & Mar Resistance Very Good Excellent Excellent Poor Very Good Excellent Color Customization Good Excellent Excellent Very Good Good Good Stress Whitening Excellent Fair Fair Poor Excellent Excellent Weatherability Good Excellent Excellent Very Good Good Very Good Temperature Performance Good Excellent Fair Fair Fair Good Corrosion Resistance Excellent Fair Excellent Excellent Excellent Excellent Processability One Step Multi Step Multi Step One Step One Step Complex One Step Total Production Cost $$$ $$$$$ $$$$ $$ $$$ $$$$ Order Quantity Restrictions Some Some Some None More More COMPARISON OF NYLON, METAL, AND PLASTIC Properties Test Method Artisan™ AR6000-0007 HI UV* Gloss Level** Gloss reading at 60 degrees 80-93 Molding Shrinkage – Across Flow ASTM D955 0.009 to 0.013 in/in Tensile Strength (Yield) ASTM D638 7300 psi Tensile Strength (Break) ASTM D638 5300 psi Tensile Elongation (Yield) ASTM D638 6.0% Flexural Modulus ASTM D790 270500 psi Flexural Strength (Yield) ASTM D790 9950 psi Notched Izod Impact ASTM D256 -4°F (-20°C) 5 ft-lb/in 73°F (23°C) 11 ft-lb/in Unnotched Izod Impact ASTM D256 -4°F (-20°C) 29 ft-lb/in 73°F (23°C) 30 ft-lb/in Color & Aesthetics*** Green, medium blue, dark blue, red, orange, white, gray, black Color customization available based on specific needs KEY PROPERTIES Features: high-gloss finish, UV stability, scratch resistance, chemical/corrosion resistance, cold temperature impact resistance, heat resistance * Reflects average of several colors, properties shift slightly depending on color ** Gloss level varies based on tooling temperature *** UV data available upon request Copyright © 2023, Avient Corporation.

Improved Thermal Stability & Reduced Yellowing Based on APR Critical Guidance Test Data 3mm Plaque Actual APR Tolerance L* 91 >82 da* -0.61 >-3 db* -0.38 1.5 Sample Delta L* Delta b* Reference -7.5 11.3 Reference + RHC -5.6 8.6 INCREASED rPET CONTENT & IMPROVED QUALITY SmartHeat RHC is APR accredited for both Critical Guidance and Bottle-to-Bottle, and is EPBP approved. IMPROVED BOTTLE QUALITY +2% in neck weight +3% in body weight -12% in base weight 8.5g 0.5L bottle, 60% rPET Polymer Weight Distribution Based on commercially produced water bottles, 51,000bph Mechanical Strength Increasing SmartHeat RHC Concentration Based on PTI 14.4g 0.5L water bottles, Instron testing To p Lo ad (l bs ) 14 15 16 17 8 9 10 11 0 20 40 60 80 100 0 50 100 150 200 250 300 350 400 450 Burst Pressure Increasing SmartHeat RHC Concentration Based on 8.5g, 0.5L commercially produced water bottles B ur st P re ss ur e (B ar ) 14 15 16 17 8 9 10 11 0 20 40 60 80 100 0 50 100 150 200 250 300 350 400 450 REDUCED CO2 EMISSIONS Increasing SmartHeat RHC Concentration Based on a commercial process producing 8.5g 0.5L water bottles as 51,000bph 25% reduction in energy consumed during the bottle blowing process En er gy k W Reduce Energy Consumption SmartHeat RHC increases the heat-up rate for preforms, enabling energy reductions for the heating lamps used during the bottle blowing process. This effect contributes towards reducing CO2 emissions. 14 15 16 17 8 9 10 11 0 20 40 60 80 100 0 50 100 150 200 250 300 350 400 450 Increasing SmartHeat RHC Concentration Translates to 25% CO2 reductions based on energy savings reducing CO2 emissions by 114 tonnes per year on one commercial blowing line CO 2 ( to nn es ) 14 15 16 17 8 9 10 11 0 20 40 60 80 100 0 50 100 150 200 250 300 350 400 450 SmartHeat RHC products are supplied in ColorMatrix™ approved packaging and are active as supplied.

Approved Corporate : Manual Document #: DOC-02627 Revision: 6 Document Owners: Kyle Johnson Effective Date: Mar 20, 2024 Title: Global Supplier Quality Manual Page 2 of 10 Only the electronic version of this document in ETQ is the controlled version of the document. Approved Corporate : Manual Document #: DOC-02627 Revision: 6 Document Owners: Kyle Johnson Effective Date: Mar 20, 2024 Title: Global Supplier Quality Manual Page 4 of 10 Only the electronic version of this document in ETQ is the controlled version of the document. Avient reserves the right to verify the changed sub-tier supplier structure. 5.0 Avient Business Expectations Suppliers may be asked to provide additional material specific documentation related to the following functional areas:  Environmental, Health, and Safety  Regulatory  Sourcing  Purchasing  Technology / Research & Development Any other functional group-specific requirements may be communicated through the appropriate Avient representative.

TECHNICAL PROPERTIES(1) TEST METHOD Complēt LGF30-PKE NAT Complēt LGF40-PKE NAT Complēt LGF50-PKE NAT Physical Density/Specific Gravity ASTM D792 1.47 1.54 1.66 Mechanical Tensile Strength (Yield) ASTM D638 21,100 psi 24,700 psi 26,400 psi Tensile Modulus(2) ASTM D638 1,150,000 psi 1,570,000 psi 2,150,000 psi Flexural Modulus(3) ASTM D790 1,120,000 psi 1,480,000 psi 2,030,000 psi Flammability (non-PFAS options available) Flame Rating @ 1.5 mm UL 94 V-0 V-0 — COLD IMPACT PERFORMANCE Ft -l b/ in Data based on single lot of lab-generated samples. ■ Notched 23C ■ Unnotched 23C ■ Unnotched -30C■ Notched -30C 0 5 10 15 20 25 Complēt LGF30-PKE NAT Complēt LGF40-PKE NAT Complēt LGF50-PKE NAT Izod Impact Notched ASTM D256/Unnotched ASTM D4812 4.1 4.7 5.4 18.9 19.5 19.919.1 19.8 20.1 4.0 4.6 5.0 (1) Data based on single lot of lab generated samples.

We then paid down $950 million of debt, providing us a strong balance sheet to navigate through this period of macro-economic uncertainty.”3 “We have never wavered from our goal of becoming a specialty formulator. Rose Vice President, Corporate Communications Avient Corporation +1 440-930-3162 kyle.rose@avient.com 8 Attachment 1 Avient Corporation Summary of Condensed Consolidated Statements of Income (Unaudited) (In millions, except per share data) Three Months Ended December 31, Year Ended 2022年12月31日 2021 2022 2021 Sales $ 790.4 $ 807.1 $ 3,396.9 $ 3,315.5 Operating Income 0.4 50.2 243.3 279.7 Net (loss) income from continuing operations attributable to Avient shareholders (17.0) 11.2 82.8 151.8 Diluted (loss) earnings per share from continuing operations attributable to Avient shareholders $ (0.19) $ 0.12 $ 0.90 $ 1.65 Senior management uses comparisons of adjusted net income from continuing operations attributable to Avient shareholders and diluted adjusted earnings per share (EPS) from continuing operations attributable to Avient shareholders, excluding special items, to assess performance and facilitate comparability of results. Three Months Ended December 31, Year Ended 2022年12月31日 2021 2022 2021 Sales: Color, Additives and Inks $ 490.8 $ 581.3 $ 2,355.0 $ 2,401.6 Specialty Engineered Materials 300.8 226.3 1,044.4 911.6 Corporate (1.2) (0.5) (2.5) 2.3 Sales $ 790.4 $ 807.1 $ 3,396.9 $ 3,315.5 Gross margin: Color, Additives and Inks $ 134.5 $ 164.5 $ 681.3 $ 727.5 Specialty Engineered Materials 82.4 58.3 283.7 250.9 Corporate (44.9) (6.2) (82.3) (34.6) Gross margin $ 172.0 $ 216.6 $ 882.7 $ 943.8 Selling and administrative expense: Color, Additives and Inks $ 90.2 $ 103.3 $ 380.3 $ 424.4 Specialty Engineered Materials 47.2 31.2 143.6 125.4 Corporate 34.2 31.9 115.5 114.3 Selling and administrative expense $ 171.6 $ 166.4 $ 639.4 $ 664.1 Operating income: Color, Additives and Inks $ 44.3 $ 61.2 $ 301.0 $ 303.1 Specialty Engineered Materials 35.2 27.1 140.1 125.5 Corporate (79.1) (38.1) (197.8) (148.9) Operating income $ 0.4 $ 50.2 $ 243.3 $ 279.7 14 Attachment 7 Avient Corporation Reconciliation of Non-GAAP Financial Measures (Unaudited) (In millions, except per share data) Senior management uses gross margin before special items and operating income before special items to assess performance and allocate resources because senior management believes that these measures are useful in understanding current profitability levels and how it may serve as a basis for future performance.