Additional advantages of these TPEs include: • Highly flame retardant without the inclusion of halogens • Low temperature flexibility • Excellent processability • Good abrasion resistance • Excellent colorability • Operating temperatures from -50° C to +100° C • All grades meet UL94-V0 at 1.5 mm • All grades pass IEC 60695-2-12 Glow Wire Flammability Index (GWFI) at 960°C

Matrix Resin Fiber Reinforcement Fiber Content, by Weight (%) Epoxy E-CR or E-Glass >70% MATERIAL TECHNICAL DATA Property Test Procedure Rod Diameter 1.25 in (31.75 mm) 1.50 in (38.10 mm) Glass Transition Temp (Tg) ASTM 1356 100°C Minimum 100°C Minimum Water Absorption 24 hours at 50°C (122°F) ASTM D570 0.03% 0.03% Short Beam Strength (ILSS) ASTM 2344 8,400 psi (58 MPa) 9,200 psi (64 MPa) Transverse Shear Strength ASTM 7617 23,400 psi (160 MPa) 24,640 psi (170 MPa) Traceability Lot number shall be clearly marked on each package/shipment.

This collaborative design approach has been shown to reduce development times by 50% or more and generate substantial total cost savings.

Facility: Avient Corporation - Ahrensburg Kornkamp 50 22926 Ahrensburg, Schleswig-Holstein Germany Activity: Management of EMS, Responsible Care Corporate Support Activities in Sr. Mariana Langiewicza 50 Lódzkie Konstantynow 95-050 Poland Activity: Design & Manufacture of Color, Additive Concentrate & Specialty Compounds Activity: Design and Manufacture of Colour and Additive Concentrates, Thermoplastic Resins and Specialty Compounds Facility: Avient Pakistan (Private) Limited 1-A/1, Sector-20 Korangi Industrial Area Korangi, Sindh 74900 Pakistan Facility: Avient Corporation - Lahnstein, Germany Hohenrhein 1 56112 Lahnstein, Rheinland-Pfalz Germany Activity: Design and Manufacture of Colour and Additive Concentrates, Thermoplastic Resins and Specialty Compounds Activity: Design and Manufacture of colour and additive concentrates, thermoplastic resins and specialty compounds Facility: Avient Corporation - Esenyurt, Turkey Orhan Gazi Mahallesi 1683 Sokak No:6 34538 Esenyurt Istanbul Turkey Facility: Avient Corporation - Jurong, Singapore No. 8 Third Chin Bee Road Jurong Industrial Estate Jurong 618684 Singapore Activity: Design and Manufacture of Specialty Engineered Thermoplastics Activity: Design and Manufacture of Colorants and Additives for Plastics Page 5 of 10 ABS Quality Evaluations Avient Corporation ISO 14001:2015 Certificate Of Conformance ANNEX At Below Facilities: Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation.

Facility: Avient Corporation - Ahrensburg Kornkamp 50 22926 Ahrensburg, Schleswig-Holstein Germany Activity: Management of EHS, Responsible Care Corporate Support Activities in Sr. Mariana Langiewicza 50 Lódzkie Konstantynow 95-050 Poland Activity: Design & Manufacture of Color, Additive Concentrate & Specialty Compounds Activity: Design and Manufacture of Colour and Additive Concentrates, Thermoplastic Resins and Specialty Compounds Facility: Avient Pakistan (Private) Limited 1-A/1, Sector-20 Korangi Industrial Area Korangi, Sindh 74900 Pakistan Facility: Avient Corporation - Lahnstein, Germany Hohenrhein 1 56112 Lahnstein, Rheinland-Pfalz Germany Activity: Design and Manufacture of Colour and Additive Concentrates, Thermoplastic Resins and Specialty Compounds Activity: Design and Manufacture of colour and additive concentrates, thermoplastic resins and specialty compounds Facility: Avient Corporation - Esenyurt, Turkey Orhan Gazi Mahallesi 1683 Sokak No:6 34538 Esenyurt Istanbul Turkey Facility: Avient Corporation - Jurong, Singapore No. 8 Third Chin Bee Road Jurong Industrial Estate Jurong 618684 Singapore Activity: Design and Manufacture of Specialty Engineered Thermoplastics Activity: Design and Manufacture of Colorants and Additives for Plastics Page 5 of 10 ABS Quality Evaluations Avient Corporation RC14001®:2015 Certificate Of Conformance ANNEX At Below Facilities: Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation.

Use of Non-GAAP Measures Page 3 PolyOne Commodity to Specialty Transformation • Volume driven, commodity producer • Heavily tied to cyclical end markets • Performance largely dependent on non- controlling joint ventures 2000-2005 2006 - 2009 2010 – 2014 2015 and beyond • Steve Newlin appointed, Chairman, President and CEO • New leadership team appointed • Implementation of four pillar strategy • Focus on value based selling, investment in commercial resources and innovation to drive transformation • 18 consecutive quarters of double- digit adjusted EPS growth • Shift to faster growing, high margin, less cyclical end markets • Key acquisitions propel current and future growth, as well as margin expansion • Established aggressive 2015 targets • Continue specialty transformation • Targeting $2.50 Adjusted EPS by 2015, nearly double 2013 EPS • Drive double digit operating income and adjusted EPS growth Confirmation of Our Strategy The World’s Premier Provider of Specialized Polymer Materials, Services and Solutions Specialization Globalization Operational Excellence Commercial Excellence -150.00% -50.00% 50.00% 150.00% 250.00% 350.00% 450.00% PolyOne S&P 500 Russell 2000 Dow Jones Chemical All time high of $39.28 April 4th, 2014 • 18 consecutive quarters of double digit EPS growth • 49% CAGR adjusted EPS expansion 2006-2013 • 2013 stock price increased 73% versus 30% growth in the S&P • More than seven fold increase in market cap: $0.5b $3.6b Strategy and Execution Drive Results Page 6 Appliance 4% Building & Construction 13% Wire & Cable 9% Electrical & Electronics 5% Consumer 10%Packaging 16% Industrial 12% HealthCare 11% Transportation 18% Misc. 2% 0.12 0.27 0.21 0.13 0.68 0.82 1.00 1.31 2.50 $0.00 $0.25 $0.50 $0.75 $1.00 $1.25 $1.50 $1.75 $2.00 $2.25 $2.50 2006 2007 2008 2009 2010 2011 2012 2013 2015 Target A dj us te d Ea rn in gs P er S ha re 2013 Revenues: $3.8 Billion End Markets 2013 Revenues: $3.8 Billion EPS Page 7 PolyOne At A Glance United States 67% Europe 14% Canada 7% Asia6% Latin America 6% Specialty 54% PP&S 18% Distribution 28% Mix Shift Highlights Specialty Transformation Page 8 Old PolyOne Transformation *Operating Income excludes corporate charges and special items 2% 34% 43% 62% 64% 0% 20% 40% 60% 80% 100% 2005 2008 2010 2013 Q1 2014 2015 % o f O pe ra tin g In co m e* JV's Performance Products & Solutions Distribution Specialty 65-75% Specialty OI $5M $46M $87M $195M $60M Target 2015 Target Proof of Performance & 2015 Goals Page 9 2006 Q1 2014 2015 “Where we were” “Where we are” Target 1) Operating Income % Specialty: Global Color, Additives & Inks 1.7% 13.8% 12 – 16% Global Specialty Engineered Materials 1.1% 11.6% 12 – 16% Designed Structures & Solutions -- 6.5% 8 – 10% Performance Products & Solutions 5.5% 7.7% 9 – 12% Distribution 2.6% 6.1% 6 – 7.5% 2) Specialty Platform % of Operating Income 6.0% 64% 65 – 75% 3) ROIC* (after-tax) 5.0% 9.4% 15% 4) Adjusted EPS Growth N/A 42% Double DigitExpansion *ROIC is defined as TTM adjusted OI divided by the sum of average debt and equity over a 5 quarter period Bridge to $2.50 Adjusted EPS by 2015 2015 EPS: $2.50 2013 EPS: $1.31 Continued Gross Margin Expansion Mergers & Acquisitions Spartech Accretion Incremental share buybacks Ongoing LSS Programs (50-100 bps/yr) Accelerated Innovation & Mix Improvement Several Levers to Drive Growth Mid single digit revenue CAGR Innovation Drives Earnings Growth $20.3 $52.3 2006 2013 Research & Development Spending ($ millions) Specialty Platform Vitality Index Progression* *Percentage of Specialty Platform revenue from products introduced in last five years Page 11 14.3% 30.7% 2006 2013 Specialty Platform Gross Margin % 19.5% 42.0% 2006 Q1 2014 Healthcare Consumer Packaging and Additive Technology Transportation Page 12 Unique and Innovative Solutions https://www.dropbox.com/sh/dwe4t8aacvhb8ui/uD3p_bdglP/Presentation revise pics/GLS Beverage can closure XO 2.jpg https://www.dropbox.com/sh/dwe4t8aacvhb8ui/-YgkycKypw/Anti-Counterfeiting release & images/GN1979.JPG 60% 100% 20% 30% 40% 50% 60% 70% 80% 90% 100% 2008 2014 Pension Funding** As of 2014年3月31日 Debt Maturities & Pension Funding – 3/31/14 Net Debt / EBITDA* = 1.9x $48 $317 $600 $0 $100 $200 $300 $400 $500 $600 $700 $800 2015 2020 2023 Debt Maturities As of 2014年3月31日 ($ millions) Coupon Rates: 7.500% 7.375% 5.250% ** includes US-qualified pension plans only *TTM 3/31/2014 Free Cash Flow and Strong Balance Sheet Fund Investment / Shareholder Return $0.16 $0.20 $0.24 $0.32 $0.10 $0.20 $0.30 $0.40 2011 2012 2013 2014 Annual Dividend  Expanding our sales, marketing, and technical capabilities  Investing in operational and initiatives that drive profitability growth  Manufacturing realignment  Targets that expand our: • Specialty offerings • End market presence • Geographic footprint • Operating Margin  Synergy opportunities  Adjacent material solutions  Repurchased 1.4 million shares in Q1 2014  Repurchased 6.4 million shares since April 2013  13.6 million shares are available for repurchase under the current authorization Organic Growth Acquisitions Share Repurchases Dividends The New PolyOne: A Specialty Growth Company Why Invest In PolyOne?

Facility: Avient Corporation - Ahrensburg Kornkamp 50 22926 Ahrensburg, Schleswig-Holstein Germany Activity: Management of EMS, Responsible Care Corporate Support Activities in Sr. Mariana Langiewicza 50 Lódzkie Konstantynow 95-050 Poland Activity: Design & Manufacture of Color, Additive Concentrate & Specialty Compounds Activity: Design and Manufacture of Colour and Additive Concentrates, Thermoplastic Resins and Specialty Compounds Facility: Avient Pakistan (Private) Limited 1-A/1, Sector-20 Korangi Industrial Area Korangi, Sindh 74900 Pakistan Facility: Avient Corporation - Lahnstein, Germany Hohenrhein 1 56112 Lahnstein, Rheinland-Pfalz Germany Activity: Design and Manufacture of Colour and Additive Concentrates, Thermoplastic Resins and Specialty Compounds Activity: Design and Manufacture of colour and additive concentrates, thermoplastic resins and specialty compounds Facility: Avient Corporation - Esenyurt, Turkey Orhan Gazi Mahallesi 1683 Sokak No:6 34538 Esenyurt Istanbul Turkey Facility: Avient Corporation - Jurong, Singapore No. 8 Third Chin Bee Road Jurong Industrial Estate Jurong 618684 Singapore Activity: Design and Manufacture of Specialty Engineered Thermoplastics Activity: Design and Manufacture of Colorants and Additives for Plastics Page 5 of 10 ABS Quality Evaluations Avient Corporation ISO 14001:2015 Certificate Of Conformance ANNEX At Below Facilities: Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation.

Leadership, EHS&S-PS, Facility Services, Design & Development, Information Technology, Sourcing, Logistics, Legal, and Human Resources 33587 Walker Road Avon Lake OH 44012 United States Avient Corporation Avon Lake, OH (SEM) Design and Manufacture of Specialty Engineered Thermoplastics 554 Moore Road Avon Lake OH 44012 United States Avient Corporation Design and Manufacture of Colour and Additive Concentrates, Thermoplastic Resins and Specialty Compounds Kornkamp 50 Ahrensburg Schleswig- Holstein 22926 Germany Avient Corporation - Albany Design and Manufacture of Colorants and Additives for Plastics 4 Rothwell Ave, PO Box 300-009 Auckland 0632 New Zealand Avient Corporation Avon Lake Color Design and Manufacture of Specialty Engineered Thermoplastics 33587 Walker Road, Building 416 Avon Lake OH 44012 United States Avient Corporation Design and Manufacture of Specialty Engineered Thermoplastics Pol. Mariana Langiewicza 50, 95- 050 Konstantynow, Poland Avient Corporation - Korachi, Sindh Pakistan Design and Manufacture of Colour and Additive Concentrates, Thermoplastic Resins and Specialty Compounds 1-A/1, Sector-20 , 74900 Korachi, Pakistan Avient Corporation Design and Manufacture of colour and additive concentrates, thermoplastic resins and specialty compounds Hohenrhein 1 Lahnstein Rheinland- Pfalz 5612 Germany Avient Corporation Design & Manufacturing of Colour and Additive Concentrates.

PA 6,6 Between 50-80% recycled content Good processability Cost effective DRAWBACKS VS.

EXTRUSOR Tornillo Tornillo de regulación de rosca profunda de 1" a 6" Relación de compresión 3:1 Cabezal De tubo: sin hilera (para tamaños pequeños) De presión: para tamaños de 1" o superiores Dado De tubo: bajo coeficiente de estirado De presión: hilera corta L/D 24:1 o superior Paquete de mallas Malla de 20/40/20 Canal de enfriamiento 50–65°C recomendado Secador Aire caliente o desecante, 4 horas a 79–85°C PROCESAMIENTO Temperatura Precalentamiento del alambre Ninguno Zonas de alimentación 143–149°C Transición 160–171°C Dosificación 171–176°C Cabezal/dado 176–185°C Material fundido 176–185°C Fusión máxima 199°C Compuesto de purga HDPE www.avient.com Copyright © 2020, Avient Corporation.