In order for ghosting to occur, these 5 factors must co-exist. 1.

KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Available as additive concentrates, ready-to-use additive formulations or ready-to-use additive/ colorant formulations for different polymers REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) and/or Device Master File • Food contact established with FDA/EU* APPLICATION BULLETIN * FDA/EU compliance information available upon request; exceptions may occur Healthcare use limitations apply—see below.

APPLICATION BULLETIN 1 Typical properties: these are not to be construed as specifications HOW TRILLIANT™ HC FORMULATIONS HELP TO SOLVE THE MOST DIFFICULT PERFORMANCE AND PROCESS CHALLENGES Trilliant HC conductive thermoplastics can be customized to meet your unique challenges.

PRODUCT BULLETIN PROPERTY TEST METHOD TYPICAL VALUE (ENGLISH) TYPICAL VALUE (SI) Specific Gravity ASTM D-792 11.0 11.0 Tensile Modulus1 ASTM D-638 1.20E+6 psi 8270 MPa Tensile Strength1 (Yield) ASTM D-638 3,950 psi 27.2 MPa Flexural Modulus ASTM D-790 800,000 psi 5520 MPa Flexural Strength ASTM D-790 7,000 psi 48.3 MPa Notched Izod Impact2 ASTM D-256A 2.1 ft•lb/in 110 J/m Deflection Temperature Under Load 66 psi (0.45 MPa), Unannealed, 0.250 in (6.35mm) ASTM D-648 280°F 138°C Deflection Temperature Under Load 264 psi (1.8 MPa), Unannealed, 0.250 in (6.35mm) ASTM D-648 190°F 87.8°C TECHNICAL PROPERTIES 1 Type I, 0.20 in/min (5.1 mm/min) 2 73°F (23°C), 0.125 in (3.18 mm), Injection molded www.avient.com Copyright © 2020, Avient Corporation.

PRODUCT RANGE HIGHLIGHTS Amosorb™ 4020E • Non-nylon based oxygen scavenging technology for PET • Helps to prolong the shelf life of many products in major markets Amosorb™ 100 • Non-nylon based oxygen scavenging technology for PET • Developed to meet the needs of the North American market • Featuring a special additivation package to allow for pre-consumer regrind Amosorb™ 4020G • Lower haze levels and lower impact on PET recycle stream • Non-nylon based active oxygen scavenger • PET and rPET compatible • Can be used with mono-layer and multi-layer applications Amosorb™ 4020R • Consistent performance with all levels of rPET (25%, 50% and 100%) • Improved haze and color when in combination with rPET • Flexibility on choice of rPET grade • Non-nylon based product Amosorb™ SolO2 -1 (non-carbonated/ carbonated) and SolO2 -2 (carbonated) • Nylon based oxygen scavenging technologies for PET • Active barrier effect to prevent O 2 ingress • Passive barrier effect to prevent gas ingress and digress from the packaging (i.e.

OnColor™ UL 94 Colorants* • More than 2,000 recognized concentrates available worldwide in all color options • HB rating for most of PP, PS, ABS, PC/ABS, PBT, PA, PA-GF, TPU generic resins • V-0, V-1, V-2 and 5VA/5VB ratings for more than 200 specific engineering resins • Master file of recognized concentrates with scope of use accessible in the UL product finder • Development of custom products for specific resins upon request • Compliance Letters available for REACH and RoHS Cesa™ Flame Retardant Additives for Glow Wire • Fire performance in line with different levels of Glow Wire temperatures (IEC 60695-2-12) • Let-Down Ratio adjustable to reach different levels of Glow Wire temperatures • Non-halogen (in accordance with IEC 61249- 2-21) and non-HBCD** solutions • Wide range of solutions adapted to different polymers (PP, PS, PC) • Color and flame retardants can be combined in one product • Compliance Letters available for REACH and RoHS APPLICATION BULLETIN * Solutions also sold as Renol™ UL 94 Colorants APPLICATION POLYMER GWFI TEMPERATURE TYPICAL LET-DOWN RATIO CONTENT HIPS 750–960°C 5–10% Non-HBCD flame retardant** PC 850–960°C 2–4% Non-halogen in accordance with IEC 61249-2-21 PP homopolymer 850–960°C 4% Non-halogen in accordance with IEC 61249-2-21 PP copolymer 850–960°C 4–8% Antioxidant - metal deactivator ** Non-HBCD means that Hexabromocyclododecane (HBCD) is neither used as starting material during the mixing phase of our products nor intentionally added during production, but it cannot be excluded that it is not present at level of ubiquitous traces in any of the raw materials used in manufacturing of our products.

This additive technology can be implemented during PET processing without impact on production efficiency. 0 10 20 30 40 50 60 70 80 0.050 0.1 0.15 0.2 % A A R ed uc ti on % Use Rate Anthranilamide 0 10 20 30 40 50 60 70 80 90 .04 .06 .08.020 0.1 0.16 0.180.140.12 0.2 % A A R ed uc ti on % Triple A-1+ 1.844.4AVIENT www.avient.com Copyright © 2022, Avient Corporation.

They are available for processes including extrusion, injection molding, blow molding, rotational molding and thermoforming. 1. https://www2.deloitte.com/us/en/pages/technology-media-and- telecommunications/articles/global-mobile-consumer-survey-us-edition.html 2. https://cals.arizona.edu/news/why-your-cellphone-has-more-germs-toilet www.avient.com Copyright © 2020, Avient Corporation.

Provided this diluted dispersion is stirred or agitated to re-disperse immediately prior to addition into the vessel, it is now a simple matter of pouring the dispersion steadily and consistently over a period of at least 1 minute.

If you are producing 1 million pounds of plastisol annually, you are also losing 1,300 pounds of resin into the air.