The resulting tensile test data shown in Figure 1 gives an indication of the variation in material response that can be observed as a function of the fibre orientations. In reality, the material response can fall anywhere between the curves shown in Figure 1. Figure 1: Tensile test data as a function of the fibre orientation 0° (orange), 45° (green), 90° (blue) https://www.hexagonmi.com Figure 4: Failure location in the flexural test for the isotropic modelling Figure 6: Failure location in the tensile test for the isotropic modelling approach (left), Digimat anisotropic modelling approach (middle) and reality (right) Figure 3: Flexural test results with the isotropic modelling approach (orange) and Digimat anisotropic modelling approach (green) Figure 5: Tensile test results with the isotropic modelling approach (orange) and Digimat anisotropic modelling approach (green) Figure 5 shows the tensile test results with, again, a convincing advantage for the Digimat anisotropic modelling approach against the isotropic modelling approach.

Globale Richtlinie von Avient zur Bekämpfung von Bestechung und Korruption (Anti-Bribery and Anti-Corruption, ABAC) Veröffentlicht: 1. Juli 2020 Inhaltsangabe Unsere globale Richtlinie zur Bekämpfung von Bestechung und Korruption 1 Bedeutung der Compliance 1 Unsere Verantwortung 1 Was ist Bestechung? Das Anbieten geldwerter Zuwendungen sollte nicht mit angemessenen, begrenzten und gesetzlich zulässigen Ausgaben für Geschenke, Unterhaltung und andere legitime Aktivitäten verwechselt werden, die direkt mit der Geschäftstätigkeit von Avient zusammenhängen. 1 1 Richten Sie sich bei der Entscheidung, ob geplante Ausgaben zulässig sind, nach dem Abschnitt Geschenke und Bewirtung des Verhaltenskodex von Avient und nach unserer Richtlinie zu Geschenken und Unterhaltung.

Internationale Avient-beleid tegen omkoping en corruptie Uitgegeven: 1 juli 2020 Ons internationale beleid tegen omkoping en corruptie 1 Belang van naleving 1 Onze verantwoordelijkheid 1 Wat is omkoping? Het aanbieden van iets van waarde mag niet worden verward met redelijke en beperkte, legale uitgaven voor geschenken, zakelijk vermaak en andere legitieme activiteiten die rechtstreeks verband houden met de bedrijfsactiviteiten van Avient. 1 Belang van naleving Ongeacht waar in de wereld we actief zijn, zijn wetten inzake anti-omkoping en anti-corruptie (Anti-Bribery, Anti-Corruption Laws, ABAC) van toepassing op ons bedrijf, inclusief maar niet beperkt tot de Foreign Corrupt 1 Raadpleeg het gedeelte Geschenken en gastvrijheid in de Gedragscode van Avient en ons Beleid inzake geschenken en vermaak om te bepalen of uw uitgaven toegestaan zijn. Noord-Amerika Wereldwijd hoofdkantoor Avon Lake, Verenigde Staten 33587 Walker Road Avon Lake, OH, Verenigde Staten 44012 Gratis: +1-866-765-9663 Telefoon: +1-440-930-1000 Fax: +440 930 3064 Azië-Pacific Regionaal hoofdkantoor Shanghai, China 2F, blok C 200 Jinsu Road Pudong, 201206 Shanghai, China Telefoon: +86 (0) 21 6028 4888 Fax: +86 (0) 21 6028 4999 Zuid-Amerika Regionaal hoofdkantoor Sao Paulo, Brazilië Av.

Globalna polityka przeciwdziałania łapownictwu i korupcji Avient Data wydania: 1 lipca 2020 r. Nasza globalna polityka przeciwdziałania łapownictwu i korupcji 1 Znaczenie postępowania zgodnego z przepisami 1 Nasza odpowiedzialność 1 Co to jest łapówka? Ofert korzyści majątkowych nie należy mylić z uzasadnionymi, mieszczącymi się w rozsądnych granicach i zgodnymi z prawem wydatkami na upominki, rozrywki biznesowe i inne legalne działania bezpośrednio związane z prowadzaniem działalności przez Avient. 1 1 Aby określić, czy proponowany wydatek jest dozwolony, należy zapoznać się z treścią części Upominki oraz przejawy gościnności w Kodeksie postępowania Avient oraz z Polityką dotyczącą upominków i rozrywki.

Politica globale Avient anti-concussione e anti-corruzione Politica globale Avient anti-concussione e anti-corruzione La nostra Politica globale su anti-corruzione e anti-concussione 1 Importanza della conformità 1 La nostra responsabilità 1 Cos’è una tangente? Anche 1 Consultate la sezione Regali e Ospitalità del Codice di condotta di Avient e la nostra Politica sui doni e intrattenimento per stabilire se la spesa proposta sia consentita. Tale divieto si applica sia se l’offerta o il pagamento sono effettuati direttamente sia tramite un’altra persona • Inserire voci fuorvianti, incomplete o false nei libri e nei registri di Avient • Ignorare i segnali di allerta quando si tratta con terze parti Nord America Sede globale Avon Lake, Stati Uniti 33587 Walker Road Avon Lake, Ohio, Stati Uniti 44012 Numero verde: +1 866 765 9663 Telefono: +1 440 930 1000 Fax: +1 440 930 3064 Asia Pacifico Sede regionale Shanghai, Cina 2F, Block C 200 Jinsu Road Pudong, 201206 Shanghai, Cina Telefono: +86 (0) 21 6028 4888 Fax: +86 (0) 21 6028 4999 America del Sud Sede regionale San Paolo, Brasile Av.

PolyOne - Bilingual T&Cs - Hungary - 1 - PAI-376902v1 TERMS AND CONDITIONS OF SALE The Terms and Conditions herein apply to the sale of PolyOne products 1. All late payments shall bear an annual interest of one month (1) EURIBOR plus 8% accrued on a daily basis, notwithstanding any damages. Minden késedelmes fizetés az EURIBOR egy (1) hónapra vetített éves kamatának plusz 8 százaléknak a felszámítását vonja maga után napi elszámolással, a károk nélkül.

PolyOne Corporation Page 1 PolyOne Investor Presentation Jefferies 2015 Industrials Conference August 2015 PolyOne Corporation Page 2 Forward-Looking Statements  In this presentation, statements that are not reported financial results or other historical information are “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. Adjusted EPS 2006Y* 2007Y* 2008Y* 2009Y* 2010Y 2011Y 2012Y 2013Y 2014Y Net income attributable to PolyOne common shareholders $ 130.9 $ 40.9 $ (417.0) $ 106.7 $ 152.5 $ 153.4 $ 53.3 $ 94.0 $ 78.0 Joint venture equity earnings, after tax (68.5) (26.1) (20.8) (19.0) (14.7) (3.7) - - - Special items, after tax(1) (21.2) 41.4 310.0 (31.0) 15.8 (30.5) 35.7 30.4 101.0 Tax adjustments(2) (30.0) (30.7) 147.2 (44.9) (88.3) (42.3) 0.5 2.2 (10.5) Adjusted net income $ 11.2 $ 25.5 $ 19.4 $ 11.8 $ 65.3 $ 76.9 $ 89.5 $ 126.6 $ 168.5 Diluted shares 92.8 93.1 92.7 93.4 96.0 94.3 89.8 96.5 93.5 Adjusted EPS $ 0.12 $ 0.27 $ 0.21 $ 0.13 $ 0.68 $ 0.82 $ 1.00 $ 1.31 $ 1.80 Adjusted EPS 2010 Q2 2011 Q2 2012 Q2 2013 Q2 2014 Q2 2015 Q2 Net income attributable to PolyOne common shareholders $ 44.7 $ 23.1 $ 18.4 $ 38.6 $ 30.9 $ 66.8 Joint venture equity earnings, after tax (4.5) - - - - - Special items, after tax(1) (9.0) 0.9 8.0 (2.2) 22.6 8.0 Tax adjustments(2) (13.1) 0.4 0.9 0.2 (5.2) (23.9) Adjusted net income $ 18.1 $ 24.4 $ 27.3 $ 36.6 $ 48.3 $ 50.9 Diluted shares 96.3 95.5 90.7 99.1 94.3 89.8 Adjusted EPS $ 0.19 $ 0.26 $ 0.30 $ 0.37 $ 0.51 $ 0.57 * Historical results are shown as presented in prior filings and have not been updated to reflect subsequent changes in accounting principal or discontinued operations 1) Special items are a non-GAAP financial measure.

PolyOne Corporation Page 1 PolyOne Investor Presentation Goldman Sachs Basic Materials Conference May 2015 PolyOne Corporation Page 2 Forward-Looking Statements  In this presentation, statements that are not reported financial results or other historical information are “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. Adjusted EPS 2006Y* 2007Y* 2008Y* 2009Y* 2010Y 2011Y 2012Y 2013Y 2014Y Net income attributable to PolyOne common shareholders $ 130.9 $ 40.9 $ (417.0) $ 106.7 $ 152.5 $ 153.4 $ 53.3 $ 94.0 $ 78.0 Joint venture equity earnings, after tax (68.5) (26.1) (20.8) (19.0) (14.7) (3.7) - - - Special items, after tax(1) (21.2) 41.4 310.0 (31.0) 15.8 (30.5) 35.7 30.4 101.0 Tax adjustments(2) (30.0) (30.7) 147.2 (44.9) (88.3) (42.3) 0.5 2.2 (10.5) Adjusted net income $ 11.2 $ 25.5 $ 19.4 $ 11.8 $ 65.3 $ 76.9 $ 89.5 $ 126.6 $ 168.5 Diluted shares 92.8 93.1 92.7 93.4 96.0 94.3 89.8 96.5 93.5 Adjusted EPS $ 0.12 $ 0.27 $ 0.21 $ 0.13 $ 0.68 $ 0.82 $ 1.00 $ 1.31 $ 1.80 Adjusted EPS 2010 Q1 2011 Q1 2012 Q1 2013 Q1 2014 Q1 2015 Q1 Net income attributable to PolyOne common shareholders $ 20.1 $ 106.0 $ 15.3 $ 11.2 $ 29.4 $ 30.2 Joint venture equity earnings, after tax (0.5) (3.7) - - - - Special items, after tax(1) (0.3) (79.8) 6.1 17.2 14.1 5.5 Tax adjustments(2) (3.5) (1.5) 0.1 0.5 (1.6) 5.9 Adjusted net income $ 15.8 $ 21.0 $ 21.5 $ 28.9 $ 41.9 $ 41.6 Diluted shares 95.3 96.4 90.7 92.8 95.7 90.1 Adjusted EPS $ 0.17 $ 0.22 $ 0.24 $ 0.31 $ 0.44 $ 0.46 * Historical results are shown as presented in prior filings and have not been updated to reflect subsequent changes in accounting principal or discontinued operations 1) Special items are a non-GAAP financial measure.

İNTERNET SİTESİ İÇERİĞİ POLYONE TEKNO POLİMER MÜHENDİSLİK PLASTİKLERİ SANAYİ VE TİCARET ANONİM ŞİRKETİ Şirket Bilgileri (Yönlendirilmiş Mesaj) No İçerik Detay 1 Ticaret Unvanı Polyone Tekno Polimer Mühendislik Plastikleri Sanayi ve Ticaret Anonim Şirketi 2 MERSİS Numarası 0836003561100014 3 Merkezi Orhan Gazi Mah.1683 Sk. No.150 Şişli/İstanbul 1 WEBSITE CONTENT POLYONE TEKNO POLİMER MÜHENDİSLİK PLASTİKLERİ SANAYİ VE TİCARET ANONİM ŞİRKETİ Content to be published permanently * Please note that in case of any changes to the following content, the update shall be published on the websites on the date such changes occur. No Content Detail 1 MERSIS number of the Company 0836003561100014 2 Title of the Company Polyone Tekno Polimer Mühendislik Plastikleri Sanayi ve Ticaret Anonim Şirketi 3 Registered office of the Company Orhan Gazi Mah.1683 Sk.

No. 0562.01) Revised 05/31/2022 Page 1 of 1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 AVIENT CORPORATION 733 East Water Street North Baltimore, OH 45872 Claire Holman Phone: (419) 257-1327 MECHANICAL Valid To: 2023年10月31日 Certificate Number: 0562.01 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following automotive plastics tests: Test Method: Test Name: ASTM D412 Tensile ASTM D523 Specular Gloss ASTM D618 (A) Conditioning of Plastics ASTM D624 (Die C) Tear Strength ASTM D638 Tensile Properties ASTM D792 (A) Density and Specific Gravity by Displacement ASTM D1004 Initial Tear Resistance ASTM D1203 (A) Volatile Loss ASTM D1895 (A) Apparent Density, Bulk Factor, Pourability ASTM D1921 Particle Size (Sieve Analysis) ASTM D2240 Durometer Hardness (Shore A and D) ASTM E1331 Color by Spectrophotometry Using Hemispherical Geometry FMVSS 571.302 Flammability FORD BN-102-01 (A) Low Temperature Flexibility FORD BO-131-03 Interior Odor ISO 3795 Determination of Burning Behavior of Interior Materials SAE J323 (A) Cold Cracking (Mandrel Bend) SAE J1351 Hot Odor for Insulation Materials SAE J1545 Instrumental Color Difference Measurement SAE J1756 Fogging Characteristics of Interior Automotive Materials (Photometric Only) DOC-058151 Angle of Repose 1 Laboratory Developed Method For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation.