TPE UNIVERSAL BLACK CMPD ET6000-0006 HI UV Desert Sand 1 ET6000-0006 HI UV Desert Sand 1 CONC 5%

MC-73463PE WHITE 1% MC-87256EV UNIVERSAL BLACK MC-87258PP SILVER LINE 1

BLACK BEAUTY 4-1 HR BLACK BEAUTY -1 HR UNIVERSAL SILVER GP22

Barrel Temperatures °F (°C) PP Mineral-Filled PP Glass-Filled PP HDPE LDPE Rear Zone 360–390(182–200) 400–420 (204–216) 415–435 (213–224) 400–420 (204–216) 370–390 (188–199) Center Zone 370–400(188–204) 410–430 (210–221) 425–445 (218–229) 410–430 (210–221) 380–400 (193–204) Front Zone 390–410(200–210) 420–440 (216–227) 435–455 (224–235) 420–440 (216–227) 390–410 (199–210) Nozzle 400–425(204–219) 415–435 (213–224) 430–450 (221–232) 430–450 (221–232) 400–425 (204–219) Melt Temperature 400–425(204–219) 415–435 (213–224) 430–450 (221–232) 430–450 (221–232) 400 - 425 (204–219) Mold Temperature °F (°C) 60–120 (16–49) Pack & Hold Pressure 50–75% of injection pressure Injection Velocity (in/s) 1.0–3.0 Back Pressure (psi) 50–100 Screw Speed (rpm) 30–100 Drying Parameters Hours @ °F (°C) Not typically required. Drying non-halogenated materials is suggested. 2 hours @ 100 (38) Moisture Range (%) Not required Follow up by purging machine with general purpose PP • Residence time should not exceed 5 minutes for Maxxam FR products • General ventilation is suggested Shut Down • Purge the equipment with a general purpose PP • All tooling and equipment must be free of any residual Maxxam FR upon shut down • Continue generating parts made from the natural PP until clear • Wipe down tool steel with mold cleaner • When using a hot runner system, care must be taken to remove residual product from the manifold MOLD DESIGN RECOMMENDATIONS Cold Slug Wells • Place cold slug wells at the base of the sprue to capture the cold material first emerging from the nozzle • Place cold slug wells at every 90° bend in the runner system • Well depths approximately 2–3 times the diameter of the runner provide best results Draft Angle • Draft angle should be 1/2°–1° per side.

Our products for lighting systems allow for maximum output, control heat, and withstand harsh conditions inside and outside the car.

NYL UNIVERSAL WHITE UV Shipment Notification - under "Material Header" MSDS - labeled as the "Product Number" (in Section 1) Together we can unlock the powerful potential of a future envisioned by you... and shared by us all.

GEON FX MTL MP105 UNIVERSAL SILVER 2096 Shipment Notification - under "Material Header" MSDS - labeled as the "Product Number" (in Section 1) Together we can unlock the powerful potential of a future envisioned by you... and shared by us all.

UV RED UNIVERSEAL Shipment Notification - under "Material Header" MSDS - labeled as the "Product Number" (in Section 1) Together we can unlock the powerful potential of a future envisioned by you... and shared by us all.

UNIVERSAL YELLOW Shipment Notification - under "Material Header" MSDS - labeled as the "Product Number" (in Section 1) Together we can unlock the powerful potential of a future envisioned by you... and shared by us all.

Back Back Back