MOVING HIGH PERFORMANCE FIBERS FORWARD CARBON FIBER CARBON FIBER DATA Standard Modulus Property UOM Value Breaking Tenacity g/d 23.0 Specific Gravity Ratio 1.80 Elongation @ Break % 1.5 Tensile Modulus g/d 1480 Moisture Regain* % 0 Creep** % 0 Shrinkage*** % 0 Melt Point °C None Decomposition Temp. °C Various Abrasion Resistance Yarn on Yarn Abrasion Ultraviolet (UV) Resistance Flame Resistance Chemical Resistance (Acid) Chemical Resistance (Alkali) Chemical Resistance (Organic Solvent) O X P P P P P This data is provided for informational purposes only, and does not constitute a specification. Equilibrium moisture regain @ 55% RH ** Creep @ 40%-58% ultimate tensile strength *** Shrinkage in dry air @ 177 C for 30 minutes MOVING HIGH PERFORMANCE FIBERS FORWARD LOCATIONS Headquarters, R&D, Manufacturing FIBER-LINE® LLC 3050 Campus Drive Hatfield, PA 19440 +1 215.997.9181 fiber@fiber-line.com Manufacturing Operations FIBER-LINE® LLC 280 Performance Drive SE Hickory, NC 28602 +1 828.326.8700 fiber@fiber-line.com EMEA & Asia Pacific Operations FIBER-LINE® INTERNATIONAL B.V.

Abrasion Resistance Ultraviolet (UV) Resistance Flame Resistance Chemical Resistance (Acid Chemical Resistance (Alkali) Chemical Resistance (Organic Solvent) Strength Retention (H2O) P X P P P P P Property UOM Value Breaking Tenacity g/d 28 Specific Gravity Ratio 1.39 Elongation @ Break % 4.6 Tensile Modulus g/d 590 Moisture Regain* % 2.0 Creep** % < 1.5 Shrinkage*** % < 0.1 Melt Point °C N/A Decomposition Temp. °C 500 CHEMICAL COMPATIBILITY Chemical Resistance to Acid: Degrades in Formic, Hydrochloric and Sodium Hydroxide acid. TECHNORA® TECHNORA® DATA Standard Modulus * Equilibrium moisture regain @ 55% RH ** Creep @ 40%-58% ultimate tensile strength *** Shrinkage in dry air @ 177 C for 30 minutes MOVING HIGH PERFORMANCE FIBERS FORWARD LOCATIONS Headquarters, R&D, Manufacturing FIBER-LINE® LLC 3050 Campus Drive Hatfield, PA 19440 +1 215.997.9181 fiber@fiber-line.com Manufacturing Operations FIBER-LINE® LLC 280 Performance Drive SE Hickory, NC 28602 +1 828.326.8700 fiber@fiber-line.com EMEA & Asia Pacific Operations FIBER-LINE® INTERNATIONAL B.V.

Handelsregister B des Amtsgerichts Mannheim Nummer der Firma: Seite 1 von 2 HRB 722265 Nummer der Eintragung a) Firma b) Sitz, Niederlassung, inländische Geschäftsanschrift, empfangsberechtigte Person, Zweigniederlassungen c) Gegenstand des Unternehmens Grund- oder Stammkapital a) Allgemeine Vertretungsregelung b) Vorstand, Leitungsorgan, geschäftsführende Direktoren, persönlich haftende Gesellschafter, Geschäftsführer, Vertretungsberechtigte und besondere Vertretungsbefugnis Prokura a) Rechtsform, Beginn, Satzung oder Gesellschaftsvertrag b) Sonstige Rechtsverhältnisse a) Tag der Eintragung b) Bemerkungen 1 2 3 4 5 6 7 1 a) PolyOne Color & Additives Germany GmbH b) Gaggenau Geschäftsanschrift: Adolf-Dambach-Straße 2-4, 76571 Gaggenau c) Die Herstellung und der Vertrieb von Farb- und Additiv Konzentraten im weitesten Sinn des Wortes unter dem warenzeichenrechtlich geschützten Namen Wilson Color sowie die Vornahme aller damit zusammenhängender Geschäfte und ähnlicher Geschäfte. 26.000,00 EUR a) Ist nur ein Geschäftsführer bestellt, vertritt er allein. Nicht mehr a) 18.11.2016 Melzer Abruf vom 08.11.2021 19:56 Handelsregister B des Amtsgerichts Mannheim Nummer der Firma: Seite 2 von 2 HRB 722265 Nummer der Eintragung a) Firma b) Sitz, Niederlassung, inländische Geschäftsanschrift, empfangsberechtigte Person, Zweigniederlassungen c) Gegenstand des Unternehmens Grund- oder Stammkapital a) Allgemeine Vertretungsregelung b) Vorstand, Leitungsorgan, geschäftsführende Direktoren, persönlich haftende Gesellschafter, Geschäftsführer, Vertretungsberechtigte und besondere Vertretungsbefugnis Prokura a) Rechtsform, Beginn, Satzung oder Gesellschaftsvertrag b) Sonstige Rechtsverhältnisse a) Tag der Eintragung b) Bemerkungen 1 2 3 4 5 6 7 Geschäftsführer: Katsers, Guy, Clervaux / Belgien, *26.06.1950 3 b) Vertretungsbefugnis geändert bei Geschäftsführer: Machin, Genevieve Elizabeth, Luxembourg / Luxemburg, *31.03.1972 mit der Befugnis, im Namen der Gesellschaft mit sich im eigenen Namen oder als Vertreter eines Dritten Rechtsgeschäfte abzuschließen.

Body Weight Active LDR (ppm) —— Body Weight —— Max Load Bo dy W ei gh t ( g) M ax L oa d (lb s) Active LDR (ppm) —— Energy Consumption —— Energy Reduction En er gy C on su m pt io n (k W ) En er gy R ed uc tio n 0 10 25 0 17 34 51 30% 1.844.4AVIENT www.avient.com Copyright © 2025, Avient Corporation. STORAGE It is recommended that packages of SmartHeat RHC are stored under ambient conditions (between 10°C and 25°C) for optimal storage stability and dosing.

Certificate Number:Certificate Number: Certificate expiration date:Certificate expiration date: Effective date:Effective date: 31-10-202231-10-2022 30-10-202530-10-2025 Expiry date of previous cycle:Expiry date of previous cycle: 30-10-202230-10-2022 31-10-201631-10-2016 ES133794ES133794 Scope of certification:Scope of certification: MANUFACTURING OF MASTERBATCHES, ADDITIVESMANUFACTURING OF MASTERBATCHES, ADDITIVES AND COMPOUNDS FOR PIGMENTING THERMOPLASTICAND COMPOUNDS FOR PIGMENTING THERMOPLASTIC MATERIALS USED IN FOOD INDUSTRYMATERIALS USED IN FOOD INDUSTRY ISO 22000:2018ISO 22000:2018 POLIGONO INDUSTRIAL EZCABARTE, C/H, Nº3 - 31194 - ORICAIN - NAVARRA - ESPAÑA AVIENT ESPAÑA, S.L.AVIENT ESPAÑA, S.L. C/ Valportillo Primera 22-24, Edificio Caoba, 28108 Alcobendas - Madrid, España This certificate is valid, subject to the general and specific terms and conditions of certification servicesThis certificate is valid, subject to the general and specific terms and conditions of certification services STANDARDSTANDARD Bureau Veritas certification certifies that the Management System Bureau Veritas certification certifies that the Management System has been audited andhas been audited and found to be in accordance with found to be in accordance with the requirements of standard:the requirements of standard: Awarded toAwarded to CertificationCertification https://e-cer.bureauveritas.com/WJLVJDYG9LKV98RP6JCHF8NPSKES0NHDXDPLOWOT1TB290DE4LNZC0JCBAI2BVWEAZ1GJWC8BMDC2TXFBGVDXP3YXG0JLAVMFN3HLEWBLUWJGXCY5PAJ8QKKSTVJYSZ9M9 https://e-cer.bureauveritas.com/WJLVJDYG9LKV98RP6JCHF8NPSKES0NHDXDPLOWOT1TB290DE4LNZC0JCBAI2BVWEAZ1GJWC8BMDC2TXFBGVDXP3YXG0JLAVMFN3HLEWBLUWJGXCY5PAJ8QKKSTVJYSZ9M9 https://e-cer.bureauveritas.com/WJLVJDYG9LKV98RP6JCHF8NPSKES0NHDXDPLOWOT1TB290DE4LNZC0JCBAI2BVWEAZ1GJWC8BMDC2TXFBGVDXP3YXG0JLAVMFN3HLEWBLUWJGXCY5PAJ8QKKSTVJYSZ9M9 https://e-cer.bureauveritas.com/WJLVJDYG9LKV98RP6JCHF8NPSKES0NHDXDPLOWOT1TB290DE4LNZC0JCBAI2BVWEAZ1GJWC8BMDC2TXFBGVDXP3YXG0JLAVMFN3HLEWBLUWJGXCY5PAJ8QKKSTVJYSZ9M9 https://e-cer.bureauveritas.com/WJLVJDYG9LKV98RP6JCHF8NPSKES0NHDXDPLOWOT1TB290DE4LNZC0JCBAI2BVWEAZ1GJWC8BMDC2TXFBGVDXP3YXG0JLAVMFN3HLEWBLUWJGXCY5PAJ8QKKSTVJYSZ9M9 https://e-cer.bureauveritas.com/WJLVJDYG9LKV98RP6JCHF8NPSKES0NHDXDPLOWOT1TB290DE4LNZC0JCBAI2BVWEAZ1GJWC8BMDC2TXFBGVDXP3YXG0JLAVMFN3HLEWBLUWJGXCY5PAJ8QKKSTVJYSZ9M9 https://e-cer.bureauveritas.com/WJLVJDYG9LKV98RP6JCHF8NPSKES0NHDXDPLOWOT1TB290DE4LNZC0JCBAI2BVWEAZ1GJWC8BMDC2TXFBGVDXP3YXG0JLAVMFN3HLEWBLUWJGXCY5PAJ8QKKSTVJYSZ9M9 2022-12-15T10:52:43+0100 Authenticity and Integrity 2022-12-15T10:53:51+0100 BUREAU VERITAS CERTIFICATION

L A B O R ATO RY E Q U I P M E N T M A N U FA C T U R E R P C R W E L L P L A T E S • Very high level of TiO2 to prevent “cross-talk” between the wells during the qPCR fluorescence testing procedure • Minimized background phosphorescence caused by agglomeration of TiO2 and/or oxidized (stressed) polystyrene • Preservation of polystyrene grade properties • Change control of formulation and manufacturing process • Robust product quality from batch to batch • Developed optimally dispersed, ready-to-use white formulation that maintains adequate signal transmission, as well as minimizing “cross-talk” and background phosphorescence • Optimized the use of general purpose polystyrene (GPPS) for a good balance between melt flow and other physical properties, such as stiffness • Provided comprehensive change control of raw materials and formulation, with a robust manufacturing process and quality control under a third party ISO 13485:2016 certified QMS Mevopur Healthcare Colorants and Formulations – pre-colored solution WHY AVIENT?

Cohesive (C) or adhesive (A). The adhesion is categorized based on adhesive failure (A)- if no TPE residue is left on the substrate or cohesive failure (C)- if the failure is in TPE. Table 2: Adhesion Values (pli) for Typical TPE grades which are polar modified styrenic block copolymers TPE-A TPE-B TPE-C TPE-D TPE-E TPE-F TPE-G Cycoloy C2950 (PC/ABS) 12.4 A 16.7 A 15 A 15.5 C 26.4 C Cycolac T1000 (ABS) 11.9 A 17.8 A 14.5 A 15.1 C 27.2 C Lexan 141 (PC) 12.2 A 14.5 A 13.5 A 17.2 C 27.1 C Zytel 7331F (PA6) 21 A 23.5 A Zytel 73G33L (33% GF PA6) 17.2 A 19.8 A Zytel 101L (PA66) 22.1 A 20.7 A Table3: Adhesion Values (pli) for commercially available TPEs.

As a thermoset, LSR can perform at continuous temperatures in excess of 200°C. There are medical grade TPEs that can be autoclaved up to 135°C for 15 minutes, but the inherent thermoplasticity of most TPEs make them susceptible to softening under extreme heat.

Injection Molding Parameters Base Resin PPA PPS PA 6/6 PA 12 Barrel Temperatures °F (°C)* Rear Zone 550–580(288–305) 550–580 (288–305) 440–490 (227–254) 440–480 (227–250) Center Zone 560–600 (293–316) 560–615 (293–324) 470–510 (243–266) 460–510 (238–266) Front Zone 580–620 (304–327) 590–630 (310–333) 490–540 (254–282) 480–520 (250–271) Nozzle 575–615 (302 –324) 600–625 (316–330) 520–570 (271–300) 500–530 (260–277) Melt Temperature °F (°C) 575–615(302–324) 600–625 (316–330) 520–570 (271–300) 500–530 (260–277) Mold Temperature °F (°C) 250–300 (121–150) 250–300 (121–150) 150–200 (66–93) 150–200 (66–93) Pack and Hold Pressure 50–80% of Injection Pressure Injection Velocity 1.0–3.0 in/sec Back Pressure 25–100 psi Screw Speed 25–75 rpm Drying Parameters °F (°C) 6 hours @ 175 (80) 6 hours @ 300 (150) 3 hours @ 180 (82) 3 hours @ 180 (82) Cushion 0.125–0.250 in Screw Compression Ratio 2.5:1–3.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General Purpose General Purpose Reverse Taper Reverse Taper Clamp Pressure 4–5 tons/in2 of projected area of cavities and runner system * Barrel temperatures should be elevated for compounds designed for electrical insulative properties.

Parameters NM5600-8002 RS NM5600-8004 RS Drying Temperature 100–120°C 100–130°C Drying Time 4–6 hours 4–6 hours Barrel Temperature °C °C Rear Zone 250–270 260–270 Central Zone 260–280 270–290 Front Zone 270–295 290–305 Nozzle 290–300 290–300 Mold Temperature 80–100 80–100 Screw Speed Moderate Moderate Back Pressure 3–10bar 3–10bar Cushion stroke 5–10% of plasticizing stroke 5–10% plasticizing of stroke Injection Speed Medium Medium Injection Pressure Medium–high Medium–high Holding Pressure 30–50% of injection pressure 20–40% of injection pressure Screw Type General purpose General purpose Screw L/D 20:1 20:1 Screw Compression Ratio 2.5:1 2.5:1 Non-return Check Valve Free flow check ring Free flow check ring Nozzle Type Reverse taper Reverse taper Barrel Capacity 30–80% of barrel should be used Processing Guide 2 Start Up & Shut Down Recommendations Purge Compound 1. 2–3 melt flow PP or purging compound.