ColorMatrix™ Liquid Color Concentrates achieved the beige color target with a uniform coloring process, ensuring a highquality sheet appearance Colorant Chromatics™ Metallic Effect Pre-colored Sulfone Colorants provided a non-conductive solution with reduced VOCs and coexisting color and metallic effects OnColor™ REC Colorants

Garibaldi 2405 Lomas de Zamora, Buenos Aires 1832 Argentina Activity: Manufacture of Colour and Additive Concentrates, Thermoplastic Resins and Specialty Compounds Activity: Design and Manufacture of Colorants and Additives Concentrates Facility: Avient Colorants SA Parc Scientifique Fleming, Fond Jean Pâques 1 Louvain-La-Nueve, Walloon Brabant 1348 Belgium Facility: Avient Corporation - Maipu, Chile Camino a Melipilla 15.170 Maipu, Región Metropolitana de Santiago 9250000 Chile Activity: Design and Manufacture of Colour and Additive Concentrates, Activity: Design and Manufacture of Colorants and Additives Concentrates Facility: Avient Corporation - Lahore, Pakistan Plot no. 135, Kitaar, Bund Road Off Multan Road, Thokar Niaz Baig. Water Street North Baltimore, OH 45872 Activity: Design and Manufacture of Colour and Additive Concentrates, Activity: Design and Manufacture of Custom PVC Plastisol and PVC Slush Mold Powder Facility: Avient Corporation - Malmö, Sweden Järnyxegatan 7 P.O. WA-06, Kalyan-Padgha Road Vashere, Maharashtra 421302 Activity: Design and Manufacture of Colorants and Additives for Plastics Activity: Design & Manufacture of Color, Additive Concentrate & Specialty Facility: Avient Corporation - Suzano, Brasil Av.

Mold Design Recommendations Gates 1. Hot runner molds are acceptable and should be sized by the manufacturer. Maintain a minimum draft angle of 1° per side. 4 Therma-Tech Incomplete Fill Melt and/or mold too cold • Increase nozzle and barrel temperatures • Increase pack and hold pressure • Increase nozzle tip diameter • Check thermocouples and heater bands Mold design • Enlarge or widen vents and increase number of vents • Check that vents are unplugged • Check that gates are unplugged • Enlarge gates and/or runners • Perform short shots to determine fill pattern and verify proper vent location • Increase wall thickness to move gas trap to parting line Shot size • Increase cushion • Decrease transfer position Brittleness Low melt temperature • Measure melt temperature with pyrometer Degraded/ overheated material • Decrease melt temperature • Decrease back pressure • Use smaller barrel/excessive residence time • Decrease screw rpm Gate location and/or size • Relocate gate to nonstress area • Increase gate size to allow higher flow rate and lower molded in stress Fibers on Surface (Splay) Melt temperature too low • Increase injection speed • Increase screw rpm Insufficient packing • Increase pack and hold pressure, and time Processing Guide 5 Sink Marks Part geometry too thick • Reduce wall thickness • Reduce rib thickness • Maintain nominal wall thickness Melt too hot • Decrease nozzle and barrel temperatures Insufficient material volume • Increase pack pressure/time Flash Injection pressure too high • Decrease injection pressure • Increase clamp pressure • Increase transfer position Excess material volume • Decrease pack pressure • Decrease shot size Melt and/or mold too hot • Decrease screw speed Excessive Shrink Too much orientation • Increase packing time and pressure • Increase hold pressure • Decrease melt temperature • Decrease injection speed • Decrease screw rpm • Increase venting Not Enough Shrink Too little orientation • Decrease packing pressure and time • Decrease hold pressure • Increase injection speed • Increase screw rpm • Decrease cooling time 6 Therma-Tech Burning Melt and/or mold too cold Mold design • Clean, widen and increase number of vents • Increase gate size or number of gates Moisture • Verify material is dried at proper conditions Nozzle Drool Nozzle temperature too hot • Decrease nozzle temperature • Decrease back pressure • Increase screw decompression • Verify material has been dried at proper conditions Weld Lines Melt front temperatures are too low • Increase pack and hold pressure • Increase vent width and locations Mold design • Perform short shots to determine fill pattern and verify proper vent location • Add vents and/or false ejector pin • Move gate location Warp Excessive orientation • Decrease injection pressure and injection rate Mold design • Increase number of gates Sticking in Mold Cavities are overpacked • Decrease injection rate and pressure • Decrease pack and hold pressure Mold design • Increase draft angle Part is too hot 1.844.4AVIENT www.avient.com Copyright © 2020, Avient Corporation.

标题：Avient shares success for Transcend™ Healthcare High-Temperature Colorants and pre-colored solutions at K 2022    To support the customer’s desire to create an improved medical instrument that is bio-compatible without compromising safety, chemical resistance, or color, Avient provided pre-colored solutions using the newly launched Colorant Chromatics™ Transcend™ Premier Healthcare Colorants.   Transcend Premier Healthcare Colorants, including pre-colored solutions, are available in a range of vivid colors globally.

OnColor™ Bio Colorants Polymer Colorants OnColor™ Bio Colorants

From creation to product delivery, this service speeds up every step of the color journey,” explains John Van Hulle, president, Global Color, Additives and Inks, PolyOne Corporation. Rapid Color Design and Choice: Colors can be easily created using existing standards, spectrophotometer or colorimeter inputs or the software’s built-in color design tools. These range from creating colors remotely through one of PolyOne’s facilities, to installing this color development technology in-house for full control and maximum color development speed.

Colorant & Additive Dispersions Brochure Colorant and additive dispersions that provide enhanced performance and color consistency Specialty Color Dispersions

Discover how a bespoke ColorWorks™ color-finding project helped gain the competitive edge in the ski boot market. Home // Gain a Colorful Insight into the Ski Boot Market Five colors were presented and each was named for a well-known ski resort.

Discover how a bespoke ColorWorks™ color-finding project helped gain the competitive edge in the ski boot market. Home // Gain a Colorful Insight into the Ski Boot Market Five colors were presented and each was named for a well-known ski resort.

A cerfitied Lean Six Sigma Black Belt, Mr.