Thread pulls; blow line jams ColorMatrix™ EZE™ Slip Agent Process aid to reduce surface friction, allowing for higher levels of rPET to be used. Improves mold release resulting in reduced thread pulls or blow line jams while supporting faster cycle times and production rates.

WEIGHT REDUCTION • Up to 75% lighter than steel; up to 25% lighter than aluminum • Better fuel economy for transportation • Simplified installation DESIGN FLEXIBILITY • Complex shapes less costly to produce than metal • Ability to tailor strength and stiffness in specific areas • Versatile aesthetic options for surface finish PART CONSOLIDATION • Easier installation and assembly with fewer parts • Simplified transport of finished goods • Fewer parts = reduced chance of failure Value that the U.S. composite materials market is expected to reach by 2022 $10.6B 50% Amount of weight reduction that advanced composites could bring to passenger cars, leading to 35% better fuel efficiency 7% CAGR that analyst firm Technavio forecasts the global medical composite materials market will experience from 2016–2020 Fiber-reinforced polymer composites combine thermoset or thermoplastic resins with fiber reinforcement, the resulting product having substantially different properties than the individual components. Advantages Recyclability, enhanced toughness, chemical resistance, noise and vibration damping, post-formability, and lower density DURABILITY STRENGTH • Corrosion resistance for marine and deep water applications • Improved shock resistance with aramid fibers • Protection from shrapnel for military barriers • Structural performance in aerospace and marine markets • High tensile strength for industrial applications © 2020 Avient, All Rights Reserved For more information on advanced composites, visit avient.com or call +1.844.4AVIENT http://avient.com

Polystrand™ R continuous fiber-reinforced thermoplastic composites are made with a resin matrix of greater than 95% post-consumer recycled PET (rPET). KEY CHARACTERISTICS • Incorporates a minimum of 95% post-consumer recycled PET resin and 58% glass fiber • Available in unidirectional tape, 2-layer X-ply™ and 3-layer tri-ply laminates • Excellent bondability to other materials via thermal lamination or adhesives • Impact and corrosion resistant • Improved carbon footprint vs. traditional polyester-based composite tape APPLICATIONS Recycled content unidirectional tapes and laminates are well-suited for applications that benefit from the light weight, high strength, and impact resistance of continuous glass fiber reinforced rPET including: • Commercial vehicles • Trailers • Structural automotive applications • Consumer electronics and accessories • Outdoor sporting equipment and adventure gear PRODUCT BULLETIN 1.844.4AVIENT www.avient.com Copyright © 2022, Avient Corporation. TECHNICAL PROPERTIES Continuous fiber-reinforced composites comparison: recycled PETG, virgin PETG and APET resin systems with 58% glass fiber reinforcement CARBON FOOTPRINT COMPARISON TO ALTERNATIVES Greenhouse gas (GHG) emissions from cradle-to-gate production Polystrand R 5840B made with rPET has a lower carbon footprint than traditional polyester-based products; 44% lower than PETG and 31% lower than APET. 0.0 1.0 2.0 3.0 RPET PETG APET kg C O 2e /k g pr od uc t

KEY CHARACTERISTICS • Excellent wear resistance • Reduced friction, heat build-up, noise and vibration • Improved processability and surface finish on parts • Lower power requirements and low maintenance • Design flexibility • Reduced weight APPLICATION BULLETIN SOLUTIONS AVAILABLE LubriOne™ Portfolio PA66, PA6 and Polyketone formulations with 10%–30% glass fiber reinforcement available Lubricants & Performance Lubricant Color Performance LubriOne NN PTFE Natural Shears and creates a PTFE film transferred to the matting surface. Aramid Fibers Yellowish Softer and less abrasive than carbon or glass fiber, commonly used for reduction in the wear of the mating surface, especially softer materials. Carbon Fibers Grey Softer and less abrasive than carbon or glass fiber, commonly used for reduction in the wear of the matting surface, especially softer materials. 1.844.4AVIENT www.avient.com Copyright © 2021, Avient Corporation.

GUIDANCE ( T O TA L C O M PA N Y ) 7 14.8% 15.8% Guidance Actual Adjusted EBITDA Margin % Better-than-expected margins driven by: • Resilient demand for composites and sustainable solutions which improved mix of higher margin applications • Deceleration of raw material inflation • Cost reduction activities Q1 EBITDA BRIDGE ( T O TA L C O M PA N Y ) 8 $ millions CAI: Price / Mix 19) Inflation (4) SEM: Price / Mix 6) Inflation (4) Net Price Benefit 17) Wage and Energy Inflation (13) Cost Reductions 8) FX (6) Q1 2023 Actual $134) Adjusted EBITDA Q1 2022 Pro Forma $ 176) Demand (48) • Weak demand conditions in-line with previous expectations • Pricing continues to cover inflation of raw materials, wages and energy U.S. & Canada 40% EMEA 38% Asia 17% Latin America 5% Q1 2023 SEGMENT, END MARKET AND GEOGRAPHY GEOGRAPHY REVENUESEGMENT FINANCIALS Consumer 18% Packaging 23% Healthcare 7% Industrial 16% Building and Construction 10% Defense 6%Telecommunications 4% Energy 5% END MARKET REVENUE (1) Total company sales and adjusted EBITDA of $846M and $134M, respectively, include intercompany sales eliminations and corporate costs $537M $91M $310M $64M Sales EBITDA Specialty Engineered Materials Color Additives and Inks $134M$846M (1) 9 Transportation 11% Q1 2 023 SA LES BY R EGI ON Y o Y C H A N G E ( E X C L . FX -11% FX -3% Total Avient -14% YoY Comparison against 2022 pro forma results • Aging infrastructure driving need for greater technological advancements and upgrades • Increased focus on strength and capacity of electrical grid plays into further adoption of composites into the market Where Avient Wins:  UV, weather-resistance, customized capabilities  Best-in-class customer responsiveness  Local high-quality manufacturing, unparalleled breadth of portfolio  Expanding position in insulators, utility poles, crossarms, and wind energy Avient Confidential 11 ENERGY 11 • Fiber-optic investments from AT&T, Corning, Commscope continue to drive industry toward innovation • $42B BEAD program in Infrastructure Bill to increase cable deployments; well-positioned to capitalize on “Made in America” requirement and “last mile” buildout Where Avient Wins:  Flame retardance, weather-resistance enables faster, safer, more reliable connections  Local manufacturing, unparalleled breadth of portfolio  Expanding position in insulation for wire jacketing, 5G buildout TELECOMMUNICATIONS Source: U.S. National Defense budget of $842 billion submitted to Congress in Q1 2023 • European NATO members annual defense spend expected to increase by up to 20% Where Avient Wins:  Dyneema® is the world’s strongest fiber™  One of the highest strength to weight ratios of any material on Earth  Direct relationships with industry leading armor manufacturers  Resistant to most chemicals, UV, and moisture to handle any environment Avient Confidential 13 DEFENSE Source: US Department of Defense, defense.gov, NATO13 Source: TRANSPORTATION • Increased EPA regulations requiring improved fuel efficiency, enabled in part by lower-weight vehicles • Automakers preparing for 2/3 of U.S.

From streamlining design, manufacturing and supply chain processes, to navigating regulatory demands, we’ll help you optimize the performance of your medical equipment, so you can grow your bottom line and stand apart from your competition. RIGID COMPONENTS: DIAGNOSTIC, IMAGING, LIFE SUPPORT, LABORATORY, & MONITORING EQUIPMENT (housings & covers, monitor bezels, body panels, handles, battery enclosures, access panels, wands, coils) Rigid Component Solution Needs: Materials compliant with ISO 10993 & USP Class VI, if required UL approved resins to meet flammability requirements Housings with toughness & good impact resistance Enclosures & components that withstand repeated cleanings High-flow materials for components with complex designs Copolyester, Polyester & PC/Polyester Blends Copolyester Eastman Tritan™ (Copolyester) High chemical resistance to a wide variety of hospital disinfectants; excellent toughness and impact resistance after disinfection; retains color and gloss after sterilization and disinfection; does not contain BPA, BPS or halogens Polybutylene Terephthalate (PBT) DuPont™ Crastin® & Rynite® (FR- PBT) 30% glass reinforced; flame retardant; good mold flow and electrical properties; high strength, stiffness, dimensional stability and heat resistance Polycarbonate/ Polyester (PC/PET) & Polycarbonate/ Polybutylene Terephthalate (PC/PBT) Covestro Makroblend® (FR-PC/PET) & (FR-PC/PBT) Strength; toughness; chemical resistance; flame retardant Covestro Makroblend® (Non-FR PC/PBT) Strength; toughness; chemical resistance; limited biocompatibility Trinseo EMERGE™ (FR-PC/PET) Chemical resistance; ignition resistance; limited biocompatibility PA, PVC, PC & PMMA Polyamide (Nylon, PA) Avient Trilliant™ XR Radiation Shielding (PA) Radiation shielding; green alternative for lead replacement; enhanced design freedom vs. lead; available in hard and soft durometers Arkema Rilsan® MED (PA11) & Rilsamid® MED (PA12) Chemical resistance; transparent and opaque; easy processing; creep resistance; temperature resistance; BPA-free; sterilizable by gamma, EtO and steam Polyvinyl Chloride (PVC) GEON Performance Solutions Resilience™ HC (PVC) Excellent chemical resistance; good strength and stiffness; very good surface quality; inherently flame resistant; available in all medical colors; excellent solvent bonding to PVC Polycarbonate (PC) Trinseo EMERGE™ (PC) Ignition resistant; transparent and opaque; glass-filled also available PolyMethyl Methacrylate (PMMA) Altuglas Plexiglas® Acrylics (PMMA) Clarity; easy processing; chemical resistance; BPA free; ideal for light piping and lenses Styrenics & FR-PC/ABS Blends Styrenics Trinseo MAGNUM™ (ABS) Opaque; custom colors; excellent impact and flow; low residuals; full biocompatibility INEOS Styrolution Terlux® HD (MABS) Good clarity; good heat and overall chemical resistance; good impact strength; good solvent bonding to PVC; outstanding surface quality INEOS Styrolution Lustran® & Novodur ® HD (ABS) Opaque appearance; outstanding chemical resistance; high impact strength; excellent balance of properties; ease of processability; bondable FR- Polycarbonate/ ABS (FR-PC/ABS) Covestro Bayblend® (FR-PC/ABS) Flame retardant; good impact resistance; dimensional stability; toughness Trinseo EMERGE™ (FR-PC/ABS) Ignition resistant; limited biocompatibility; high flow; easy processing; glass-filled also available Flexible Component Solution Needs: Comfortable handles & grips Water-tight seals Durable feet or casters Durable keypads Flow control TPE, TPC-ET, TPU, TPV & Flexible PVC Thermoplastic Elastomers (TPE) Avient Versaflex™ HC Overmolding Series (TPE) Proven healthcare solutions with hardness ranges 42–65 Shore A; autoclave, radiation and EtO sterilizable; bondable to many substrates; customizable haptics Arkema Pebax® MED (TPE) Sterilizable by gamma and EtO; low energy return; soft touch; chemical resistance; overmolding material Thermoplastic Polyester Elastomers (TPC-ET) DuPont™ Hytrel® (TPC-ET) Wide range of flexibility, stiffness, and processing options; Shore D between 30-82; BPA-free; excellent flex fatigue and toughness; low temperature flexibility; good chemical resistance Thermoplastic Polyurethane (TPU) Covestro Texin® (TPU) Biocompatible; soft touch; sterilizable; good chemical resistance; overmold for grips and handles; excellent bonding to polar substrates like PC; 70A to 95A Thermoplastic Vulcanizate (TPV) Avient Versalloy™ (TPV) Proven healthcare solutions with hardness ranges 45–90 Shore A; autoclave, radiation and EtO sterilizable; natural and colorable; smooth texture; bonds to PP Exxon Mobil Santoprene™ (TPV) Durable sealing performance; elastic recovery; excellent chemical resistance; compliance with medical standards Flexible Polyvinyl Chloride (PVC) GEON Performance Solutions Geon™ Flexible PVC Engineered exclusively for the healthcare market; transparent and opaque colors; radiopaque grades available; durometer ranges from 55A to 40D; gamma and EtO sterilizable Thermoset Silicone Elastomers Thermoset Silicone Elastomers/ Liquid Silicone Rubber DuPont™ Liveo™ Silicone Elastomers (LSR) Biocompatible; non-irritating and non-sensitization; sterilizable; made without plasticizers, phthalates or latex FLEXIBLE COMPONENTS: DIAGNOSTIC, IMAGING, LIFE SUPPORT, LABORATORY, MONITORING EQUIPMENT (o-rings, gaskets, wheels, soft touch grips/handles, keypads/displays, diaphragms, seals) WIRE & CABLE: DIAGNOSTIC, IMAGING, LIFE SUPPORT, LABORATORY, & MONITORING EQUIPMENT (plug molding, heater cable insulation, flexible jacket, flexible cords, coil cords & cable) Wire and Cable Component Solution Needs: Materials compliant with UL, RoHS, REACH & WEEE, if needed Materials with good chemical, moisture & abrasion resistance Low smoke & non- halogen materials PVC Polyvinyl Chloride (PVC) GEON Performance Solutions Geon™ Flexible PVC Inherent flame resistance; halogen-free; excellent chemical resistance; non-yellowing; proven safety record in wire and cable applications; high temperature grades available TPE, TPC-ET, TPU & POE Thermoplastic Polyester (TPE) Arkema Pebax® (TPE) Flexibility; chemical resistance; easy processing; abrasion resistance; low coefficient of friction Thermoplastic Polyester Elastomers (TPC-ET) DuPont™ Hytrel® (TPC-ET) REACH, RoHS and WEEE compliant; wide range of flexibility, stiffness, and processing options; 30D-82D; BPA-free; excellent flex fatigue and toughness; low temperature flexibility; good chemical resistance Thermoplastic Polyurethane (TPU) Covestro Texin® (TPU) RoHs, WEEE, and REACH compliant; excellent memory and recoil; abrasion resistance; Texin® Rx Series - medical grade Polyether TPU – 70A to 80D Polyolefin Elastomer (POE) Avient ECCOH™ Non-halogenated flame retardant; high flexibility; environmental stress cracking resistance (ESCR); good electrical properties PA Polyamide (Nylon, PA) Arkema Rilsan® (PA) Chemical resistance; easy processing; abrasion resistance; low coefficient of friction; dimensional stability CUSTOM AVIENT SOLUTIONS FOR MEDICAL EQUIPMENT Custom Solution Needs Avient™ Custom Solutions Specialized materials to meet unique application requirements Avient Trilliant™ Healthcare products are a line of customized solutions specific for regulated medical devices; color branding expertise FDA-registered pre-colored resins and masterbatch options; color coding for safety and brand recognition Avient collaborates with key material suppliers to provide FDA-approved pre-colored resins Avient OnColor™ HC Plus offers customizable color masterbatch solutions pre-certified for biocompatibility using ISO 10993 and USP Class VI test protocol Reduced growth of microbes Avient WithStand™ additive technologies inhibit growth of microbes that often cause odor, staining and loss of mechanical properties AVIENT DISTRIBUTION Healthcare Supplier Line Card You face a unique set of challenges when designing parts for the healthcare industry.

Place vents at the end of fill and anywhere potential knit/weld lines will occur 2. Cut vent depths to 0.0007″–0.0015″ Draft Angle Maintain a minimum draft angle of 1° per side 4 Artisan Pre-Colored Thermoplastics Troubleshooting Recommendations Problem Cause Solution Incomplete Fill Melt and/or mold too cold • Increase nozzle and barrel temperatures • Increase mold temperature • Increase injection rate • Check thermocouples and heater bands Shot size • Increase shot size • Adjust transfer position to 98% full • Increase cushion Mold design • Enlarge or widen vents and increase number of vents • Check that vents are unplugged • Check that gates are unplugged • Enlarge gates and/or runners • Perform short shots to determine fill pattern and verify proper vent location • Increase wall thickness to move gas trap to parting line Brittleness Degraded/overheated material • Decrease melt temperature • Decrease back pressure • Use smaller barrel • Decrease injection speed Gate location and/or size • Relocate gate to non-stress area • Increase gate size to allow higher flow rate and lower molded-in stress Wet material • Check moisture. Sink Marks Melt too hot • Decrease nozzle and barrel temperatures• Decrease mold temperature Insufficient material volume • Adjust transfer position • Increase shot size • Increase injection rate • Increase packing pressure Part geometry too thick • Reduce wall thickness • Reduce rib thickness Processing Guide 5 Troubleshooting Recommendations Problem Cause Solution Flash Injection pressure too high • Decrease injection pressure • Increase clamp pressure • Decrease injection rate • Increase transfer position Excess material volume • Adjust transfer position • Decrease pack pressure • Decrease shot size • Decrease injection rate Melt or mold too hot • Decrease nozzle and barrel temperatures • Decrease mold temperature Loose clamp • Reset mold height• Increase clamp tonnage Shrink Too much shrink • Increase cooling time• Decrease mold temperature Too little shrink • Decrease cooling time • Increase mold temperature Burning Process related • Decrease nozzle and barrel temperatures • Decrease mold temperature • Decrease injection rate • Reduce decompression Mold design • Clean, widen and increase number of vents• Increase gate size to reduce shear Wet material • Verify material is dried at proper condition Nozzle Drool Nozzle temperature too hot • Decrease nozzle temperature • Decrease back pressure • Increase screw decompression • Verify material has been dried at proper conditions Incorrect nozzle • Use reverse taper tip Weld Lines Melt front temperatures are too low • Increase injection rate • Increase pack and hold pressure • Increase melt temperature • Increase mold temperature Mold design • Increase gate size • Identify end of fill pattern and verify proper vent location • Add vents or increase vent width • Move gate location 6 Artisan Pre-Colored Thermoplastics Problem Cause Solution Warp Process related • Increase melt temp • Reduce injection speed • Increase pack pressure • Increase pack time • Decrease mold temperature • Increase cool time Mold design • Non-uniform mold cooling Part design • Non-uniform wall thickness Thermolator incorrect temperature • Check settings • Inspect thermocouple Sticking in Mold Overfilled cavity • Decrease injection rate and pressure • Decrease hold pressure • Adjust transfer position • Decrease nozzle and barrel temperatures • Decrease mold temperature • Decrease cooling time Part too hot • Decrease barrel temperature • Decrease mold temperature • Increase cooling time Mold design • Increase draft angle • Polish cores in direction of ejection Black Specks Contamination • Purge machine Degradation • Reduce melt temperature • Reduce screw speed • Reduce back pressure Machine related • Check for wear on screw, barrel or check ring Delamination Process related • Increase melt temperature • Decrease injection speed • Purge barrel to eliminate material contamination Mold design • Reduce sharp corners in material flow path • Increase venting Troubleshooting Recommendations Processing Guide 7 Troubleshooting Recommendations Problem Cause Solution Discoloration Oversheared material • Decrease melt temperature • Decrease injection speed • Reduce residence time Mold design • Increase gate sizing Dry material • Check moisture of material to ensure it is within the recommended moisture percentage for molding 1.844.4AVIENT www.avient.com Copyright © 2020, Avient Corporation.

KEY CHARACTERISTICS • Formulated with 25–100% recycled resin from PIR & PCR sources • Reduces waste and supports the circular economy • Achieves equivalent performance to standard polyolefin formulations • Can be recycled at end of life • Provides good stiffness, durability, impact resistance and UV stability • Enables customized performance characteristics depending on application need MARKETS AND APPLICATIONS Maxxam REC Polyolefins are suitable for use across many industries and applications where traditional polyolefin materials are used, including: • Transportation - HVAC systems, engine guards, battery housings, flame retardant applications • Industrial - Structural parts, furniture • Consumer - Household appliances, personal care items, packaging, office supplies, food contact applications • Electrical and Electronic – Housings, buttons, junction boxes SUSTAINABILITY BENEFITS • Formulated with 25–100% recycled resin from PIR and/or PCR sources • Reduces waste and supports the circular economy • Reduces carbon footprint • Can be recycled at end of life PRODUCT BULLETIN CHARACTERISTICS UNITS Maxxam REC RS5200-5029 C BLACK X2 Maxxam REC MX5200-5036 HS I BLACK Maxxam REC MX5200-5037 RS HS I BLACK Maxxam REC MX5200-5038 RS HS I BLACK Maxxam REC MX5200-5039 RS HS I BLACK Filler/ Reinforcement – Unfilled Unfilled 20% Mineral 40% Mineral 30% Glass Fiber Recycled Content – 95% PCR 97% PIR 75% PIR 55% PIR 65% PIR Density (ISO 1183) g/ccm 0.93 0.95 1.09 1.28 1.15 Tensile Modulus (ISO 527-1) MPa 1250 950 1500 2150 4250 Tensile Stress (ISO 527-2) MPa 25 175 10 15 50 Tensile Strain Break (ISO 527-2) % >20 >80 >30 17 4.5 Charpy Notched (ISO 179) kJ/m 3 8 5 4 11 TECHNICAL PERFORMANCE CHARACTERISTICS UNITS Maxxam REC RS5200-5026 RS NHFR BLACK 70 Maxxam REC FR H8 V2 BLACK RG 70 Maxxam REC L6 GF/30 H BLACK T RG 70 Maxxam REC MX5200-5027 RS HS BLACK RG Maxxam REC MX5200-5028 RS HS BLACK RG Maxxam REC C10 H-UV AS EP RG BLACK 70 Filler/ Reinforcement – 30% Glass Fiber Unfilled 30% Glass Fiber 30% Glass Fiber 40% Talcum Unfilled Recycled Content – 37% PIR 90% PIR 55% PIR 35% PIR 50% PIR 25% PIR Density (ISO 1183) g/ccm 1.42 0.950 1.13 1.15 1.23 1.03 Tensile Modulus (ISO 527-1) MPa 8250 1300 6100 6400 – 700 Tensile Stress (ISO 527-2) MPa 71.0 30.0 70.0 70.0 28.0 15.0 Notched Izod (ISO 180) kJ/m – 4.0 10 5.8 2.7 No Break Flame Rating @ 1.6mm thickness (UL 94) – V-0 V-2 HB HB HB HB TECHNICAL PERFORMANCE Copyright © 2023, Avient Corporation.

APPLICATION BULLETIN STRENGTH & FLEX Excellent Dimensional Stability, High Stiffness, Impact Resistance SOLUTION: Short & Long Fiber Formulations, Continuous Fiber Composite Tapes & Laminates DURABILITY Density, Stiffness, Strength SOLUTION: Short & Long Fiber Formulations SURFACE PROTECTION Performance Enhancements, Chemical Resistance SOLUTION: Scratch & Mar Resistance, UV Stable Additives TACTILE EXPERIENCE Soft Touch, Slip Resistance SOLUTION: Thermoplastic Elastomers METAL REPLACEMENT High Stiffness-to-Weight Ratio, Lightweighting, Buoyancy SOLUTION: Continuous Filament Winding Technology EXTREME PERFORMANCE Waterproof Seals & Closures SOLUTION: Thermoplastic Elastomers DYNAMIC COMFORT Durability, Customization, Shock Absorption SOLUTION: Thermoplastic Elastomers COLOR RESILIENCE Excellent Adhesion to Substrates, Weatherability SOLUTION: Plastisol Textile Inks FUNCTIONALITY High Stiffness, Structural Integrity, Metal Replacement SOLUTION: Short & Long Fiber Formulations, Continuous Fiber Composite Tapes & Laminates AESTHETIC APPEAL Custom Colors, Patterns & Tones SOLUTION: Custom Polymer Colorants, Specialty Additives RESILIENCE Weatherability, Longevity SOLUTION: Specialty Engineered Polymer Formulations STEM TO STERN OUTSTANDING FROM Explore the many ways polymers can help you innovate to meet evolving consumer demands and create thoughtfully designed paddlesports products that set your brand apart.

NAME BASE RESIN(S) TARGET MARKETS/ APPLICATIONS AVAILABLE FEATURES 1 Artisan™ Pre-Colored Thermoplastics ABS, PA Powersports, Lawn & Garden, Marine, Electronics, Home Appliances, Cosmetic Packaging Customizable pre-color solutions Scratch & mar resistance Weatherability & UV resistance High impact resistance Chemical resistance Simplifies processing/replaces paint Tailored temperature performance range: -20°C to 105°C Bergadur™ Polyester Formulations PBT Transportation, Consumer, Industrial High strength Good creep rupture strength Good chemical and heat resistance Low friction and good abrasion resistance Complēt™ Long Fiber Reinforced Structural Thermoplastics/ OnForce™ Long Glass Fiber Reinforced Polypropylene Composites PA, PK, PP, PPA, PPS, TPU Consumer, Transportation, Industrial Long fiber technology Elevated impact and mechanical properties at room temperature Increased performance at temperature extremes Excellent creep and fatigue resistance Glass and carbon fiber filled options Lubricated, fire retardant, and pre-colored options PK-based formulations offer reduced carbon footprint as a result of the base resin Recycled grades formulated with up to 100% post- industrial recycled (PIR) or post-consumer recycled (PCR) content Edgetek™ Engineered Polymer Formulations ABS, LCP, PA, PC, PC/ ABS, PC/PBT, PC/PET, PC/PSU, PEEK, PES, PEI, POM, PPA, PPS, PSU Transportation, Consumer, Industrial, Telecommunications, Electrical & Electronics Strength and durability Chemical and temperature resistance High impact resistance Weatherability Flame retardant grades: UL 94 V-0, V-1, V-2, and 5VA Low-density grades for weight reduction 5G properties – customizable Dk/Df and 3D/LDS solutions Edgetek™ REC PC Recycled Polycarbonate Solutions PC Electrical & Electronics, Consumer Goods, Transportation Contain 25–70% PIR or PCR content Comparable performance to prime PC formulations Edgetek™ PKE Polyketone Formulations PK Electrical & Electronics, Industrial, Consumer, Transportation Excellent chemical resistance Good strength, durability and dimensional stability Pre-colored formulations Non-halogen, flame retardant performance to UL 94 V-0 Reduced carbon footprint compared to PA6 and PA66 1 See technical data sheets for complete product details SPECIALTY ENGINEERED THERMOPLASTICS NAME BASE RESIN(S) TARGET MARKETS/ APPLICATIONS AVAILABLE FEATURES 1 Gravi-Tech™ Density Modified Formulations PA, TPU, TPE, PBT Consumer, Transportation, Industrial Customized density, from 1.5 to 11 gm/cm3 Broad modulus and strength: flexible to rigid Chemical and corrosion resistance Alternative to lead and other traditional dense metals Suitable for metallization and electroplating Low-shrinkage grades available Gravi-Tech™ BIO Bio-based Formulations Bio-based PP Cosmetic Caps & Closures, Perfume Caps, Spirit Bottle Caps, Luxury Boxes, Handles & Knobs Customized density, from 1.5 to 11 gm/cm3 Formulated with partially bio-based resin from renewable plant sources Achieve equivalent performance to prime density modified solutions Gravi-Tech™ REC Recycled Formulations rPP, rABS, rPA Cosmetic Caps & Closures, Perfume Caps, Spirit Bottle Caps, Luxury Boxes, Handles & Knobs Customized density, from 1.5 to 11 gm/cm3 Based on recycled resin and/or filler from PIR and/or PCR sources Achieve equivalent performance to prime density modified solutions LubriOne™ Internally Lubricated Formulations/ LubriOne™ PKE Polyketone Formulations PA, PBT, PC, PEEK, PEI, PK, POM, PP, PPA, PPS, PS Transportation, Electrical & Electronics, Industrial Low coefficient of friction Self-lubricating Chemical, wear, and corrosion resistance PK-based formulations can offer a reduced carbon footprint compared to PA6, PA66 and POM Grades avoiding the use of fluorinated lubricants such as PTFE are available Maxxam™ Polyolefin Formulations PP Consumer, Transportation, Electrical & Electronics, Industrial Homopolymer and co-polymer grades Optional additives: UV, heat stabilizers Standard grades available in natural and black Maxxam™ BIO Bio-Based Polyolefin Formulations P P Consumer, Transportation, Electrical & Electronics, Industrial Formulated with 10–50% bio-content including bio-based resin and/or filler Bio-filler from sources including olive seed powder, recycled coffee grounds, cellulose fiber Achieves equivalent performance to standard polyolefin formulations Maxxam™ FR Flame Retardant Polyolefin Formulations PE, PP Consumer, Transportation, Electrical & Electronics, Industrial, Energy Flame retardant grades: UL 94 V-0, V-1, V-2, and 5VA Elevated UL RTI ratings Halogen-free flame retardant grades available Maxxam™ REC Recycled Polyolefin Formulations PP Consumer, Transportation, Electrical & Electronics, Industrial Formulated with 25–100% recycled resin from PIR and PCR sources Achieves equivalent performance to standard polyolefin formulations Nymax™/Bergamid™ Polymer Formulations PA 6, 66, 612, 12, co-polymers Transportation, Building & Construction, Electrical & Electronics Toughened grades: medium and high impact Optional additives: heat stabilized, lubricated, impact modified, nucleated Standard grades available in natural and black Pre-colored solutions available Nymax™ BIO Bio-based Polyamide Solutions Bio-based PA Transportation, Consumer Goods, Industrial, Building & Construction Formulated with 16–47% natural filler, reducing the carbon footprint Excellent surface appearance and colorability Lower warpage compared with PA66 glass fiber-filled materials Equivalent performance to PA66 glass fiber-filled materials Excellent dimensional stability and property retention rate after water uptake Nymax™ REC Recycled Nylon Formulations PA6, PA66 Transportation, Consumer, Household Appliances, Electrical & Electronics, Industrial Contains 20–100% recycled content PIR and PCR grades available Support the circular economy Comparable performance to prime grades Super tough formulations available Customizable solution NAME BASE RESIN(S) AVAILABLE FEATURES1 NEUSoft™ Thermoplastic Polyurethanes and NEU™ Custom Capabilities PEBA, TPU, PA 11, PA 12, PP, PE, TPE Radiopacifiers, stabilizers, and surface modifiers Antimicrobial technologies Pre-colored formulations Small lot capabilities Short lead times Trilliant™ HC Healthcare Thermoplastics ABS, LCP, PA, PA 6, PA 66, PC, PC/ABS, PC/PSU, PEBA, PEEK, PES, PK, POM, PPA, PSU Certified to USP Class VI Formulations locked down Drug master file submissions by product stewardship Pre-colored, small lot production down to 50 lb–250 lb Sterilization, chemical resistance, and secondary process guidance Adherence to FDM-GMP manufacturing standards Antimicrobial technologies Materials for radiation shielding protection PK-based formulations offer reduced carbon footprint as a result of the base resin Versaflex™ HC Thermoplastic Elastomers TPE Overmolding Clear and heat resistant Ultra clear grades Ultra soft TPE gels, 30 Shore OO FDA, USP Class VI, ISO 10993 approved grades Sterilizable under autoclave, radiation, and EtO gas Extrusion, injection, and blow moldable Bio-based formulations available HEALTHCARE SPECIALTY FORMULATIONS 1 See technical data sheets for complete product details SPECIALTY ENGINEERED THERMOPLASTICS NAME BASE RESIN(S) TARGET MARKETS/ APPLICATIONS AVAILABLE FEATURES 1 PREPERM™ Low-Loss Dielectric Thermoplastics PPE, PBT, ABS, PP Telecommunications, Transportation Stable and controlled dielectric performance Ultra-low transmission loss at mmWave frequencies up to 220 GHz Dielectric constant (Dk) range spanning 2.55 to 23 Stat-Tech™ Static Dissipative & Electrically Conductive Formulations ABS, PA, PC, PC/ABS, PC/PSU, PEEK, PEI, PES, PP, PPA Transportation, Electrical & Electronics Integrated EMI/RFI shielding Conductive properties Anti-static/dissipative properties Corrosion resistance Lightweighting and ease of processing Clean room materials for semiconductors available TPE grades are available (see page 6) Surround™ EMI/RFI Shielding Formulations ABS, PP, PBT, PC, PA 66 Transportation, Electrical & Electronics Integrated EMI/RFI shielding Long fiber technology Conductive properties Galvanic corrosion protection Lightweighting and ease of processing Therma-Tech™ Thermally Conductive Formulations LCP, PA, PEEK, PP, PPA, PPS Consumer, Transportation Thermally conductive Low coefficient of thermal expansion Corrosion resistance 1 See technical data sheets for complete product details NAME BASE RESIN(S) AVAILABLE FEATURES1 ECCOH™ Low Smoke and Fume Non-Halogen Formulations PE, PP, TPE, EVA Flame retardant, low smoke and fume, non-halogen (LSFOH) Flexible, low friction, easy-peel, and high-speed processing Compatible with Avient colorants and additives ECCOH™ XL Cross-Linkable Solutions XLPE Enhances the performance of traditional ECCOH LSFOH solutions Improved oil, chemical and UV resistance, mechanical performance, or operating temperature FireCon™ CPE Insulation Jacketing Formulations CPE, CPE alloy Low and medium voltage cable jacketing Flame retardant and 90°C deformation resistance Oil resistance RoHS grades available Maxxam™ FR Flame Retardant Polyolefin Formulations PE, PP UL Yellow Card for plenum applications Halogen-free flame retardant grades available Maxxam™ SY Foamable Flame Retardant Formulations Foamable PP co-polymer Easy processing Variety of final densities available Corrosion resistance Syncure™ XLPE Cross-linkable Polyethylene Formulations XLPE Low and medium voltage formulations High performance moisture cure technology UL bulletinized XHHW2 and VW1 Temperature, abrasion, and oil resistant Formulations available without DBDPE Resistant to electrical breakdown WIRE AND CABLE SPECIALTY THERMOPLASTICS NAME TARGET MARKETS/APPLICATIONS AVAILABLE FEATURES1 OnFlex™ Thermoplastic Elastomers Transportation, Building & Construction, Electrical & Electronics, Industrial, Wire & Cable Low odor solutions UV stabilization High heat resistance Chemical resistance Automotive approved grades Excellent compression set Overmolding Flame resistant grades Excellent weatherability Extrusion, injection, and blow moldable Formulations with imbedded antimicrobial additives reSound™ BIO Thermoplastic Elastomers Consumer, Transportation, Industrial Biopolymers sustainably sourced from plant-based raw materials Utilizing 35–75% bio-renewable content Strength and durability Chemical resistance Impact resistance Pre-colored solutions reSound™ REC Recycled Content Thermoplastic Elastomers Personal Care Products, Lawn & Garden Tools, Outdoor Goods, Office Supplies, Footwear, Houseware Durables, Consumer Electronics, Automotive PIR & PCR formulations utilizing 9–83% recycled content PCR grades formulated with recycled ocean plastics, food packaging, engine oil, or polyvinyl butyral (PVB) PCR grade suitable for use in specific food-contact applications Supports the circular economy Can be overmolded to PP, PC, ABS, PC/AB Comparable performance to traditional TPEs reSound™ Ultra-Low Carbon Footprint Thermoplastics Elastomers Personal Care, Household Appliances, Consumer Packaging, Consumer Electronics Formulated to achieve a negative, neutral or low product carbon footprint (PCF) Industry-first cradle-to-gate PCF range between -0.46 and -0.02 in kg CO2 equivalent/kg product Opaque natural appearance Easily colorable Comparable performance to traditional TPEs Can be overmolded to PP or PE Stat-Tech™ TPE Static Dissipative & Electrically Conductive Thermoplastic Elastomers Automotive, Industrial, Conveyor Belts & Controls, ADAS Systems, Electronic Devices Electrical resistivity range from 10 to 10¹⁰ Ω Hardness range from 40–85 Shore A Protects critical electrical components from EMI/RFI and reduces static build-up Simplifies manufacturing Overmolds directly onto polymer substrates Meets regulatory compliance requirements of ATEX and ESD, and food contact compliance grades are available Versaflex™ and Versaflex™ HC Thermoplastic Elastomers Consumer, Packaging, Healthcare, Electrical & Electronics, Appliances, Medical Tubing, Protective Films Overmolding Vibration damping grades Clear and heat resistant TPEs Ultra clear grades Ultra soft TPE gels, 30 Shore OO FDA, USP Class VI, ISO 10993 approved grades NSF and UL listings Sterilizable under autoclave, radiation, and EtO gas Extrusion, injection, and blow moldable Formulations with imbedded antimicrobial additive Bio-based formulations for healthcare available GLS™ THERMOPLASTIC ELASTOMERS 1 See technical data sheets for complete product details Lightweighting Complēt™ Long Fiber Reinforced Structural Thermoplastics Edgetek™ LD Low Density Formulations LubriOne™ Internally Lubricated Formulations OnForce™ Long Glass Fiber Reinforced Polypropylene Composites Stat-Tech™ Static Dissipative & Electrically Conductive Formulations Surround™ EMI/RFI Shielding Formulations Therma-Tech™ Thermally Conductive Formulations Human Health & Safety NEUSoft™ Thermoplastic Polyurethanes Versaflex™ HC Thermoplastic Elastomers Reduced Energy Use Artisan™ Pre-Colored Thermoplastics Versaflex™ Non-Blooming TPEs for Consumer Electronics VOC Reduction OnFlex™ LO Thermoplastic Elastomers Versaflex™ Low Adhesive Build-up TPE for Protective Film Tack Layer Versaflex™ PF Tack Layer for Surface Protective Films Recycle Solutions Complēt™ REC Long Fiber Reinforced Structural Thermoplastics Edgetek™ REC PC Recycled Polycarbonate Solutions Gravi-Tech™ REC Recycled Formulations Maxxam™ REC Recycled Polyolefin Formulations Nymax™ REC Recycled Nylon Formulations reSound™ REC Recycled Content Thermoplastic Elastomer Biopolymers Gravi-Tech™ BIO Bio-based Formulations Maxxam™ BIO Bio-based Polyolefin Formulations Nymax™ BIO Bio-based Polyamide Solutions reSound™ BIO Thermoplastic Elastomers Versaflex™ HC BIO Thermoplastic Elastomers Eco-conscious Complēt™ PKE Long Fiber Reinforced Structural Polyketone Thermoplastics Edgetek™ PKE Polyketone Formulations Edgetek™ Solutions for Laser Welding LubriOne™ PKE Polyketone Formulations Gravi-Tech™ Lead Replacement Formulations reSound™ Ultra-Low Carbon Footprint Thermoplastics Elastomers Trilliant™ HC Healthcare Polyketone-based Thermoplastics Trilliant™ XR Lead Replacement Thermoplastics Sustainable Infrastructure ECCOH™ Low Smoke and Fume Non-Halogen Formulations ECCOH™ XL Cross-linkable Solutions Edgetek™ Formulations for 5G Maxxam™ FR Flame Retardant Polyolefin Formulations PREPERM™ Low-Loss Dielectric Thermoplastics Syncure™ XLPE Cross-linkable Polyethylene Formulations SPECIALTY ENGINEERED FORMULATIONS THAT SUPPORT SUSTAINABILITY SPECIALTY ENGINEERED MATERIALS FOCUS MARKETS Our product portfolio offers customizable solutions to serve a full range of markets, including: Building & Construction Consumer Energy Healthcare Industrial Packaging Telecommunications Transportation 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation.