Attachment 2 Tax adjustments(2) 2)

Manufacturers have the ability to design and validate to meet UL criteria, and FM approval standards, including: • UL94 V-0 • UL94 HB • UL94 V-1 • UL94 5VA • UL94 V-2 • UL94 5VB • UL2335 • FM4998 NON-HALOGENATED CHOICES In addition to standard halogenated options, Cesa Flame Retardant Additives are also available as non-halogenated formulations.

EXTRUSOR Tornillo 3/4" a 6" para polietileno, de filete sencillo y sin sección de mezcla, Relación de compresión 1.5–2:1 Cabezal De presión media: ángulo de 30° a 40° Dado Del tamaño adecuado para una hilera de 1/8" o menos L/D 24:1 recomendado Paquete de mallas Sin paquete de mallas (opcional según la presión) Canal de enfriamiento 50–65°C recomendado Alimentador Preferentemente gravimétrico—3 compartimentos para cross-linked Secador Desecante, 4 horas a 70°C, para el compuesto ECCOH™ solamente; nunca se debe colocar silano seco en los secadores PROCESAMIENTO Temperatura ECCOH Serie 5000 ECCOH Serie 6000 Precalentamiento del alambre 80–120°C 80–120°C Zonas de alimentación 93°C 135°C Transición 135 °C 163°C Dosificación 150°C 190°C Cabezal/dado 165°C 215°C Material fundido 165–170°C 215–225°C Llama a la salida del dado Sí, según sea necesario Velocidad de la línea Sensible a la cizalla: Observar temperatura de fusión, amperaje del motor y presión Compuesto de purga HDPE +1.844.4AVIENT www.avient.com Copyright © 2020, Avient Corporation.

The production of PK emits up to 61 percent less carbon dioxide (CO 2 ) than nylon and POM.

Manufacturers have the ability to design and validate to meet UL criteria, including: • UL 94 V-0 • UL 94 V-1 • UL 94 V-2 NON-HALOGENATED CHOICES Silcosperse flame retardants are also available as non-halogenated formulations.

TEMPERATURE DISTRIBUTION DIAGRAM • Test Method: FTTS-FA-010-2007 4.2 • Equipment: Thermovision • Heat Source: 500W Halogen Lamp • Heat Distance: 100 cm Surface temperature before exposure: 20.22°C Surface temperature after 10 min exposure: 33.85°C Temperature change: +13.6°C Added Cesa Fiber Additives for heat preservation TEST METHOD STANDARD REQUEST TEST RESULT GB/T30127 Far infrared radiation properties Far infrared emissivity ≥0.88 (5-14um) (Test temperature: 34°C) 0.9 Far infrared radiation temperature rise ≥ 1.4°C 9°C GB/T 18319-2019 Thermal retention with accumulated by infrared ray Maximum temperature rise ≥ 6°C 8.9°C Mean temperature rise ≥ 4.4°C (20 minutes) 5.6°C FTTS-FA-010 Infrared radiation properties & thermal retention temperature rise Average emissivity ≥ 0.8 (2-22um) (Test temperature: 25°C) 0.8 Specified heating ΔT ≥ 0.5°C (relative to the standard) +5.34°C (ΔT) GB/T 11048-2008 Method A Thermal transmittance Unit: clo Naked body: 0 Underwear: 0.04 T-shirt: 0.09 Thick sweater: 0.35 Winter coat: 0.7 All the data above are the reference value 0.625 Human Physiological Experiment Blood flow volume +12.9% Blood flow velocity +13.6% Blood oxygenation(%SpO2) +1.7% www.avient.com Copyright © 2023, Avient Corporation.

The white ABS plastic samples, produced with and without Cesa Light Additives, were exposed to simulated sunlight conditions using the weathering test ISO 4892- 2:2013.

680.00 Black 2% Black 3C 680.01 Brown 6% 4625C 680.02 Red 15% 7621C 680.03 Orange 6% 1595C 680.04 Yellow 6% 605C 680.05 Green 6% 7732C 680.06 Blue 10% 7697C 680.07 Violet 15% 7665C 680.08 Grey 5% 7539C 680.09 White 12% 7499C * Recommended let down ratio addition rates.

The relationship of the parties comprises that of seller and purchaser, and no more, with the Buyer purchasing from PolyOne and reselling for its own account and risk. 2.

NEUSoft™ UR842A NEUSoft™ UR852A NEUSoft™ UR862A NEUSoft™ UR873A Hardness 42 52 62 73 Specific Gravity 0.96 0.98 1.01 1.04 Compression Set 17 16 16 23 Tensile Strength @ 50% (psi) 130 185 265 455 Tensile Strength @ 100% (psi) 185 257 364 594 Tensile Strength @ 200% (psi) 305 392 532 830 Tensile Strength @ Break 990 1367 1849 2509 Elongation 501 575 626 542 Tear Resistance 120 164 234 319 Melt Index 190C/8.7kg 2 4 9 13 SELECTION GUIDE NEUSoft™ Thermoplastic Polyurethanes With continued advancement in healthcare technology, the importance of quick prototyping and material sampling has never been greater.