TECHNICAL BULLETIN PREPERM™ and Edgetek™ Low-Loss Dielectric Thermoplastics The PREPERM™ and Edgetek™ dielectric portfolios have been specially formulated to meet application demands for materials that enable faster and more reliable connections at high-band 5G frequencies (mmWave). KEY CHARACTERISTICS • Stable and controlled dielectric performance up to a frequency range of 220 GHz • Dk range spanning 2.55 to 23 • Ultra-low transmission loss at mmWave • Allow high design flexibility, part miniaturization and weight reduction • Easy processability MARKETS & APPLICATIONS These high frequency, conductive materials support the rapid deployment of 5G in industries ranging from telecommunications and consumer electronics to automotive and healthcare.

% Solids Color Index pH Typical Lightfastness GREEN HCC-12172 Phthalocyanine BS 17 1.07 PG-7 1 I/O HCC-12173 Phthalo Brominated VYS 25 1.16 PG-36 1 I/O HCC-10562 Phthalocyanine YS 30 1.15 PG-7 1 I/O HCC-12176 Chromium Oxide 80 2.8 PG-17 1 I/O VIOLET/MAGENTA HCC-17680 (c) Ultramarine Violet 50 1.46 PV-15 1 I/O HCC-2170 (b) Quinacridone Violet 30 1.09 PV-19 2 I/O HCC-14562 Quinacridone Magenta 25 1.06 PR-122 2 I/O HCC-26775 Benzimidazolone 20 1.03 PV-32 2 I/O HCC-33159 (a) Carbazole Violet 12 1.03 PV-23 2 I/O BROWN/TAN HCC-1286 (b) Iron Oxide, Tan HR 60 1.85 PBr-11 1 I/O HCC-12201 Iron Oxide, Light 71 2.21 PBr-6 2 C I/O HCC-12202 Iron Oxide, Dark 67.5 2.06 PBr-6 2 C I/O BLACK HCC-12203 Furnace-High Jet 18 1.06 PBk-7 1 I/O HCC-12204 Furnace-High Jet 6 1 PBk-7 1 I/O HCC-12205 Furnace-Low Jet 34 1.15 PBk-7 1 I/O HCC-12206 Furnace-Medium Jet 20 1.07 PBk-7 1 I/O HCC-18654 Furnace-Ultra High Jet 15 1.04 PBk-7 1 I/O HCC-14674 Iron Oxide 59 1.82 PBk-11 2 C I/O ALUMINUM HCC-12177 Aluminum 50 1.43 PM-1 2 I/O HCC RS = Red Shade YS = Yellow Shade VYS = Very Yellow Shade BS = Blue Shade VBS = Very Blue Shade GS = Green Shade NC = Non-Crystallizing HR = Heat-Resistant (a) = Potential Bleed / Migration (b) = ESO plasticizer (Epoxidized Soybean Oil) (c) = Pigment may fade in acidic environment LIGHTFASTNESS I = Indoor Only I/O = Indoor or Outdoor Mass = Outdoor Masstone Application Only C = Some Caution Advised HEAT STABILITY 1 = Above 400°F 2 = 350°F–400°F 3 = Below 350°F C = Some Caution Advised www.avient.com Copyright © 2020, Avient Corporation.

ONFLEX™ HT ONFLEX™ AF 7210 ONFLEX™ S KA ONFLEX™ S KG Applications Fasteners/ Clips Fasteners/ Clips Fasteners/ Clips Fasteners/ Clips Defining Characteristic High temperature sealing performance Ambient temperature sealing performance High temperature sealing performance Ambient temperature sealing performance Density 1.00 g/ml 0.99 g/ml 1.10 g/ml 1.13 g/ml Physical Properties Tensile Strength 6.0–10.0 MPa 5.0–11.5 MPa 3.0–7.5 MPa 2.6–4.9 MPa Tear Resistance 25.0–37.0 kN/m 21.0–43.0 kN/m 17.0–46.0 kN/m 16.0–29.0 kN/m Compression Set 73°F (23°C) 72hrs 12–27% 16–32% 13–23% 31–35% 158°F (70°C) 22hrs 28–44% 32–43% 29–38% 62–66% 212°F (100°C) 22hrs 45–53% 56–60% 54–57% 80–85% Hardness 40–80 Shore A 40–80 Shore A 40–80 Shore A 40–80 Shore A Overmolding Substrate Polypropylene/ Polyethylene Polypropylene Polyamide Polyamide Processing Injection Molding/ Extrusion Injection Molding/ Extrusion Injection Molding/ Extrusion Injection Molding/ Extrusion HOW GLS TPEs MAKE THE DIFFERENCE IN AUTOMOTIVE FASTENERS AND CLIPS • Low compression set – coupled with good stress relaxation, our automotive TPEs are designed to maintain a good seal over time and reduce noise generated by vibration • High temperature performance – Avient automotive TPEs provide good sealing performance in temperatures up to 100°C/212°F • Bonding performance - strong chemical bond to polypropylene, polyethylene, and polyamide • Process flexibility - grades can be both injection molded and extruded • Easy to color - can be colored at the machine • Reduced production steps - some grades do not require pre-drying • Low VOC/FOG - OnFlex HT™ has been externally tested to VDA 278 and is proven to help satisfy vehicle interior air quality (VIAQ) regulatory requirements • Single source supply – we can streamline your supply chain with the ability to provide polymer colorants, engineered thermoplastics, and thermoplastic elastomers from a single source • Global support - we provide production, technical, and commercial support in locations convenient to your operations, including North America, Europe, and Asia To learn more about GLS TPEs for automotive applications, visit www.avient.com or call +1.844.4AVIENT (1.844.428.4368).

INDUSTRY BULLETIN DISPERSIONS IN HEALTHCARE TECHNOLOGY DESCRIPTION TYPICAL APPLICATIONS Silicone Colorant Dispersions Biocompatible, conformable silicone rubber colorants that deliver lightfastness and aesthetic appeal • 3D medical silicone printing • Anatomical models and surgical guides • External prosthetics and orthotics • Wearable medical devices • Medical ventilation/respiratory masks • Dental and medical tools and equipment • Catheters and tubing • Medical adhesives Silicone Additive Dispersions Silicone additive solutions formulated to provide chemical resistance, durability, and enhanced physical properties Rubber Colorant Dispersions Durable rubber colorants formulated for optimal dispersion and lot-to-lot consistency to promote ease of handling • Medical devices and tools • Vibration and shock control for medical equipment • Drug delivery devices Urethane Colorant Dispersions Versatile urethane colorants that streamline production and enhance quality • Medical packaging • Foam enclosures/support for medical tools and equipment • Medical and surgical devices • Physical therapy tools Epoxy Colorant Dispersions Long-lasting, hygienic epoxy colorants that provide high-cost efficiency, stability, and customization opportunities • Medical adhesives • Healthcare facility floor coatings Vinyl Colorant Dispersions Vinyl colorants developed for applications where dispersion, uniformity, compatibility, and cleanliness are essential • Catheters and tubing • Medical equipment Aqueous Additive Formulations Functional additives stabilized, suspended, and dispersed in water that shorten development cycles, streamline operations, and can be customized to meet specific requirements • Medical gloves • Wound care Electrically Conductive Additives for Silicone Innovative silicone additives to provide high conductivity and lower filler loadings • Wearable medical devices • Neurostimulation electrode pads • Medical tools and equipment Laser Marking Additives for Silicone Dispersions containing laser absorbers and color formers that eliminate the need for secondary etching while promoting chemical resistance, mechanical property retention, and production efficiency • Medical packaging • 3D medical silicone printing • Anatomical models and surgical guides • External prosthetics and orthotics • Medical ventilation/respiratory masks • Medical devices Surface Modification Additives for Silicone Non-oil based silicone additives that reduce tackiness and enhance smoothness of the cured compound • Catheters and tubing • Dental tools and equipment • Medical adhesives • Medical devices, tools, and equipment Self-Bonding Silicone Silicone compounds able to bond to various substrates without prime coating • Medical tools and equipment • Wearable medical devices • Medical packaging This listing represents standard Avient dispersion technologies and addresses common healthcare applications, but we can work with you to explore additional options. However, they can also introduce new challenges in developing the high-performing and cost-effective products needed to help doctors and medical practitioners deliver treatments that will improve patient outcomes.

PRODUCT SELECTION GUIDE AESTHETIC APPEAL Custom Colors, Special Effects, Color Stability SOLUTION: Custom Polymer Colorants, Pre-Colored Materials POSSIBILITIES: Grips, Stocks, Frames, Magazine Bases DYNAMIC COMFORT Shock Absorption, Vibration Damping SOLUTION: Thermoplastic Elastomers POSSIBILITIES: Recoil Pads, Straps TACTILE EXPERIENCE Soft Touch, Wet Grip SOLUTION: Thermoplastic Elastomers POSSIBILITIES: Grips, Slides, Triggers PERFORMANCE & FUNCTION Custom Weight, Toughness, Reduced Machining, Metal Replacement, Thermal Management and Stability, Wear Resistance SOLUTION: Structural Reinforced Formulations, Super Tough Formulations, Composite Heat Release Technology, High-Density Modified Formulations, Internally Lubricated Formulations POSSIBILITIES: Stocks, Frames, Barrels 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation. ENGINEERED POLYMER SOLUTIONS - FEATURES & CHARACTERISTICS Resin Nymax™ Formulations Characteristics Applications PA6 GF 600 A 14 Natural 14% Glass Reinforced Stocks, Frames, Receivers, Handguards, Forearms, Picatinny Rails, Grips PA6 GF 600 A 33 Natural 33% Glass Reinforced, Heat Stabilized PA6 NM6000-0026 HI BK 33% Glass Reinforced, Toughened PA6 GF 600 A 60 UV Black 60% Glass Reinforced, Heat Stabilized PA6 GF 600 A 33 Black 28 V 33% Glass Reinforced, Heat Stabilized, UV PA6 1010 A Black 13 Super Toughened, Heat Stabilized PA6 1010 A Natural Super Toughened, Heat Stabilized PA6 NM6000-0027 ST Black Super Toughened PA6 NM6000-00013 HS UV Black 50% GF, High Flow PA6 PA66 NM6600-0018 HI HS 14 Nat 14% Glass Reinforced, Toughened, Heat Stabilized PA66 GF 1200 A 33 HS Black 22 33% Glass Reinforced, Heat Stabilized PA66 GF 1200 A 33 HS Natural 33% Glass Reinforced, Heat Stabilized PA66 NM6600-0019 HI HS 33 Nat 33% Glass Reinforced, Toughened, Heat Stabilized PA66 NM6600-0020 HI HS 43 Nat 43% Glass Reinforced, Heat Stabilized PA66 1200 A L Natural Unreinforced PA66 1200 A ZIP 22 Natural Unreinforced PA66 NM6600-0021 ST Black Super Toughened PA66 NM 1200 MT HS Black Toughened, Heat Stabilized PA66 NM 1200 MT HS Natural Toughened, Heat Stabilized Specialty Products Color Characteristics Applications Edgetek™ ET6200-0031 Black Black 20% Glass Reinforced PA12 Stocks, Frames, Receivers, Handguards, Forearms, Picatinny Rails, Bolt Carriers, Grips Gravi-Tech™ X GT 33991-05A-01-3 Copper 3sg, PA6, Copper Gravi-Tech™ X GT-30197-001-P4 Gray 4sg, PA610, Tungston Gravi-Tech™ GT 6400-0001 GRV 5.0 Black 5sg, PA610, Tungston Thermoplastic Elastomers Durometer OM Substrate Color Characteristics Applications OnFlex™ AF 7210 25-90A PP Black/Natural General Purpose with UV Stabilizer Grips, Recoil Pads, Gun Straps Dynaflex™ G7900 30-90A PP Black/Natural General Purpose Versaflex™ XP 2850 50A PP Natural Wet Grip Technology Versaflex™ VDT 4202-40 40A PP Black/Natural Vibration Damping Versaflex™ VDT 5120-40 40A PA Black/Natural Vibration Damping Versaflex™ OM6059-9 60A PA Black High Flow Versaflex™ OM6258 60A PA Black/Natural Enhanced Bond

INJECTION PRESSURE The injection pressure must be set high enough to obtain a high injection rate (Figure 3). Hydrocerol Chemical Foaming Agents can be used in low pressure and high pressure processes. The high pressure process leads to larger and stretched cells with higher density reductions.

FL.Datasheet PackingYarn.indd FIBER OPTICAL CABLES MOVING HIGH PERFORMANCE FIBERS FORWARD Key Features • Filament level coating produces longer lasting products • Dissipates heat and reduces shaft wear • Excellent sealing and lubricity properties • Twisted products available for added strength • Non-PFOA PTFE products available FIBER-LINE® FIBERS FOR PACKING YARN • Carbon Fiber • Kevlar® Para-Aramid • Nomex® Meta-Aramid • Graphite • Fiberglass • PTFE Fiber FIBER-LINE® PERFORMANCE ADDING COATINGS • FIBER-LINE® Packcoat™ PTFE • FIBER-LINE® Packcoat™ Silicone Oil • FIBER-LINE® Packcoat™ Graphite • FIBER-LINE® Packcoat™ Mineral Oil FIBER-LINE® PACKING YARN PRODUCTS • Braided compression packing • Packing rings • Packing materials for pumps and valves Overview • FIBER-LINE® offers a broad range of continuous filament yarn and performance additives for braided compression packing yarn. PACKING YARN FIBERS PROCESSES PRODUCTS MOVING HIGH PERFORMANCE FIBERS FORWARD This data is provided for informational purposes only, and does not constitute a specification. For over 25 years, FIBER-LINE® has provided science- driven expertise that improves the performance and the end-use processing of high performance fibers.

ColorMatrix™ Lactra™ SX Light Blocking Additive High-performance, visible light blocking technology for extended shelf life, UHT dairy PET packaging PRODUCT BULLETIN PRODUCT DESCRIPTION ColorMatrix™ Lactra™ SX Light Blocking Additive is a solid masterbatch additive that, when added to PET to make monolayer bottles, provides high-performance light blocking technology and protection for liquid dairy contents. This additive helps PET packaging to protect longer shelf life products, especially ultra-high temperature (UHT) liquid dairy products, from visible-light induced oxidation due to ambient storage conditions. Traditionally, UHT liquid dairy products have been packaged in laminated paperboard cartons, pouches, or multilayer high density polyethylene (HDPE) and polyethylene terephthalate (PET) bottles.

TARGET APPLICATIONS Excelite IM chemical foaming additives (CFAs) are engineered for a wide range of injection molded polymers: olefins, PVC, polystyrene, PC/ABS and high heat applications. These versatile CFAs are ideal for use in a wide range of industries, including: • Automotive • Construction • Commercial • Personal care packaging • Structural foamed applications • Consumer goods, including specific grades available to meet food contact requirements PRODUCT BULLETIN PRODUCT NAME DESCRIPTION POLYMERS FOOD CONTACT CELL STRUCTURE Excelite IM 3 High density reduction with larger cell size. PP, PE, PS, PVC No Good Foam PP Better, larger cells with lower cell density in standard IM processes; suitable for cell nucleation in structural foam processing PP, PE, PS, PVC Yes Better FA-110 Best cell structure with higher cell density; provides better structural integrity and lower density in standard IM processes PP, PE, PS, PVC Yes Best KEY CHARACTERISTICS Excelite IM formulations provide injection molders with: • Material density and weight reduction • High concentration of active CFA • Improved distribution of CFA into polymer matrix • High cell density with tight cell structure • Control over consistency and accuracy • Reduced sink marks • Ability to improve flow of material • Cycle time reduction • Improved dimensional stability • Improved thermal insulation EXCELITE IM – PRODUCT FORMULATIONS www.avient.com Copyright © 2020, Avient Corporation.

GENERAL PURPOSE GLS TPES FOR PACKAGING SOFT TOUCH GRIPS BONDING TO POLAR SUBSTRATES GENERAL PURPOSE GLS TPES FOR PACKAGING SOFT TOUCH GRIPS BONDING TO NON POLAR SUBSTRATES Dynaflex™ G2711 Dynaflex™ G2780 Dynaflex™ G6713 Dynaflex™ G7960 Versalloy™ XL9045 Versaflex™ CL40 Aesthetics Grippy, 43A & translucent Low tack, 84A & translucent Extra soft, 13A & translucent Rubbery, 60A & opaque Matte, 45A & natural Grippy, 40A & water clear Special Characteristics Grippy medical grade PP & PE OM Extra soft General purpose High flow & fast setup Water clear Regulatory FDA, EU & USP VI FDA FDA & EU FDA FDA FDA & EU Overmolding Polypropylene Polypropylene & Polyethylene Polypropylene Polypropylene Polypropylene Polypropylene Versaflex™ CL 2250 Versaflex™ OM 3060 Versaflex™ CE 3120-65 Versaflex™ CE 3620 Versollan™ RU 2205 Aesthetics Grippy, 50A & clear Grippy, 59A & clear Silky feel, 65A & matte finish Silky feel, 65A & matte finish Grippy, 65A & matte finish Special Characteristics Clear overmold Clear overmold Abrasion resistance & high strength Low compression set & high flow Abrasion resistance & high strength Regulatory FDA & USP VI FDA & USP VI UL 94 FDA & ISO 10993-10 — Overmolding Polycarbonate Polycarbonate & ABS Polycarbonate, ABS, Copolyester & Nylon 12 Polycarbonate, ABS, Copolyester Polycarbonate, ABS, Copolyester & Nylon 12 1.844.4AVIENT www.avient.com Copyright © 2020, Avient Corporation.