ECert.QECertificate Page 1 of 2 Validity of this certificate is based on the successful completion of the periodic surveillance audits of the management system defined by the above scope and is contingent upon prompt,written notification to ABS Quality Evaluations, Inc. of significant changes to the management system or components thereof. ABS Quality Evaluations This is to certify that the Quality Management System of: PolyOne Corporation 733 E. IATF 16949:2016 The Quality Management System is applicable to: Certificate No: 38972 Effective Date: 04 September 2018 Expiration Date: 03 September 2021 Issue Date: 31 December 2018 IATF No: 0328156 Alex Weisselberg, President DESIGN AND MANUFACTURE OF CUSTOM PVC PLASTISOL AND PVC SLUSH MOLD POWDER (WITH ADDITIONAL FACILITIES LISTED ON ATTACHED ANNEX) Certificate Of Conformance has been assessed by ABS Quality Evaluations, Inc. and found to be in conformance with the requirements set forth by: Page 2 of 2 ABS Quality Evaluations PolyOne Corporation IATF 16949:2016 Certificate Of Conformance ANNEX At Below Facilities: Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation.

ECert.pdf Page 1 of 2 Validity of this certificate is based on the successful completion of the periodic surveillance audits of the management system defined by the above scope and is contingent upon prompt,written notification to ABS Quality Evaluations, Inc. of significant changes to the management system or components thereof. ABS Quality Evaluations This is to certify that the Quality Management System of: PolyOne Corporation 80 North West Street Norwalk, OH 44857 U.S.A. IATF 16949:2016 The Quality Management System is applicable to: Certificate No: 39913 Effective Date: 30 November 2017 Expiration Date: 29 November 2020 Issue Date: 30 November 2017 IATF No: 0280241 Alex Weisselberg, President DESIGN AND MANUFACTURE OF COLOR CONCENTRATES (WITH ADDITIONAL FACILITIES LISTED ON ATTACHED ANNEX) Certificate Of Conformance has been assessed by ABS Quality Evaluations, Inc. and found to be in conformance with the requirements set forth by: Page 2 of 2 ABS Quality Evaluations PolyOne Corporation IATF 16949:2016 Certificate Of Conformance ANNEX At Below Facilities: Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation.

ECert.QECertificate Page 1 of 2 Validity of this certificate is based on the successful completion of the periodic surveillance audits of the management system defined by the above scope and is contingent upon prompt,written notification to ABS Quality Evaluations, Inc. of significant changes to the management system or components thereof. ABS Quality Evaluations This is to certify that the Quality Management System of: PolyOne Corporation Plastics Compounds and Colorants Group 107 Jackson Street Dyersburg, TN 38024 IATF 16949:2016 The Quality Management System is applicable to: Certificate No: 39032 Effective Date: 14 August 2018 Expiration Date: 13 August 2021 Issue Date: 17 August 2018 IATF No: 0322936 Alex Weisselberg, President MANUFACTURE, DESIGN AND SUPPLY OF PROPRIETARY THERMOPLASTIC COMPOUNDS, INCLUDING THE SUPPLY OF TOLL COMPOUNDING SERVICES (WITH ADDITIONAL FACILITIES LISTED ON ATTACHED ANNEX) Certificate Of Conformance has been assessed by ABS Quality Evaluations, Inc. and found to be in conformance with the requirements set forth by: Page 2 of 2 ABS Quality Evaluations PolyOne Corporation IATF 16949:2016 Certificate Of Conformance ANNEX At Below Facilities: Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation.

Versaflex Most GLS styrenic TPEs (Dynaflex and some Versaflex) have fairly high mold shrinkage and cause the overmolding TPE to contract more than the substrate, which can result in warpage or cupping of the substrate part.

compravendita 21/12/2018 MI-2019-11025 POLYONE ITALY SRL C.F. 02216820023 rettifica di cessione di azienda 05/06/2019 MI-2019-264861 POLYONE ITALY SRL C.F. 02216820023 rettifica contratto di cessione azienda 05/06/2019 MI-2019-264862 MAGENTA MASTER F[..] VA/1 VIA PADRE LEGA 56 GALLARATE (VA) CAP 21013 Unita' Locale n. MI/1 VIA ALESSANDRINI 56 MAGENTA (MI) CAP 20013 Sede Secondaria n.

Cosmetic brands COSMETIC BRANDS C O V E R O F A I R C U S H I O N P O W D E R C O M P A C T • Low coefficient of friction (COF) to balance the opening pressure and sealing performance • General FDA compliance • Good chemical resistance and barrier protection to water and oxygen • Overmold to PP with good compression set • Delivered chemically resistant material with excellent sealing properties and good resilience to achieve requested performance • Provided onsite technical support to improved injection speed and achieve good bonding performance • Offered a material solution that could be leveraged across the customer’s global cosmetic brands Custom Versaflex™ TPE KEY REQUIREMENTS WHY AVIENT? https://www.avient.com/products/thermoplastic-elastomers/versaflex-thermoplastic-elastomers

The resulting custom-formulated grades of GLS™ Dynalloy™ OBC and Versaflex™ TPE allowed the manufacturer to switch to a two-shot molding process that eliminated the time-consuming and costly assembly operations needed for the old part. Reduced assembly costs: Switching to Dynalloy™ OBC and Versaflex™ TPE allowed the introduction of two-shot molding, which eliminated a multi-component assembly process.

Versaflex Most GLS styrenic TPEs (Dynaflex and some Versaflex) have fairly high mold shrinkage and cause the overmolding TPE to contract more than the substrate, which can result in warpage or cupping of the substrate part.

MAIA+ N° rapport :223-2023-000066-FR 10898066 0.5 jour Date Début / Fin :04/11/2022 /04/11/2022 PolyOne France - site de Saint Ouen l'Aumône 1 /11 ATTESTATION DE RECONNAISSANCE Attribué à PolyOne France - site de Saint Ouen l'Aumône 14 avenue de l'Eguillette / ZA du Vert Galant 95310 - SAINT OUEN L'AUMONE - FRANCE Bureau Veritas Certification certifie que les prestations de l’entreprise susmentionnée ont été évaluées et jugées conformes aux caractéristiques énoncées dans le décret en vigueur à la date d’édition du présent certificat : Décret n°2021-461 du 16 avril 2021 relatif à la prévention des pertes de granulés de plastiques industriels dans l’environnement Sous réserve du respect des caractéristiques vérifiées, cette attestation est valable jusqu’au : 16/02/2026 Date originale : 17/02/2023 Attestation n°: 223-2023-000066-FR Date : 17/02/2023 Affaire n°: 10898066 Laurent CROGUENNEC - Président Adresse de l’organisme certificateur : Bureau Veritas Certification France Le Triangle de l'Arche - 9 Cours du Triangle - 92937 Paris La Défense Des informations supplémentaires concernant le périmètre de cette attestation ainsi que l'applicabilité des exigences du décret peuvent être obtenues en consultant l'organisme. Pour vérifier la validité de ce certificat, vous pouvez téléphoner au : + 33 (0)1 41 97 00 60

OPQ GRAY OM 428C Shipment Notification - under "Material Header" MSDS - labeled as the "Product Number" (in Section 1)