Dynaflex G - Chair Lumbar Support LEADING SEATING MANUFACTURER C H A I R L U M B A R S U P P O R T • Superior tensile strength to minimize stretching • Good aesthetics including look, feel and color consistency • Ability to meet aggressive customer timeline • Engaged technical service teams early to review material and application requirements, expediting lead time • Conducted in-person technical support and coaching during mold trials and production in Tijuana, Mexico • Enabled customer to achieve consistent product appearance by determining the ideal let down ratios for the existing color concentrate Dynaflex™ G KEY REQUIREMENTS WHY AVIENT?

XRU-2085 ETFE207 CC HIGH BLACK LIQUID COLOR RED 483-30275-6 LIQUID COLOR TR BLACK 482-10101-1

V1055 BLACK MM481 FLESH 2040 TYPE (NCS color) FB556 NON-PHTHALATE BLACK FOAM

X NI-1575509 Black D 011 MOLDING LATEX BLACK AFFINITY

LX-1601 Thin Molding latex BLACK SPARKLE 620587 2054 HS UV BLACK 28

DBX950 BLACK D1041CWBM WHITE BUTTER MOLD FB122 BLACK FOAM

MOLD RELEASE DBX-3505 BLACK DBX704E BLACK LO GLOSS

Providing solutions that are considered recyclable within the colored bottle stream will thus be an integral part of the recyclability strategy for both convertors and brand owners. The coarse ground material was then crystallized in a vacuum oven at 160°C before drying the material at 160°C for approx. 4 hours within a PET drier • Plaques were then molded on a BOY XS and 10 of these were kept after each cycle, to take color measurements • This process was then repeated until 5 heat cycles had been completed RESULTS FOR RECYCLABILITY METHOD-1 As plaques were produced while the material went through five different melt heat histories, plaques were produced at each cycle and L*, a*, and b* values were measured. To do so the following procedure was carried out: • Preforms were produced by dosing 0.09% of Avient Fortis Amber-1 and 4% of our nylon- based oxygen scavenger Amosorb SolO2-2 • Preforms were ground down to a coarse granule size (~2mm) using a Retsch mill • The coarse ground preforms were crystallized in a vacuum oven at 160°C before drying the material in a PET drier at 160°C for approx. 4 hours • This material was then injection molded and blown into bottles with a) 50:50 dilution with Virgin PET with no color and b) 50:50 dilution with Virgin PET + Fortis Amber-1 at 0.045% Figure 2.

ONFLEX™ HT ONFLEX™ AF 7210 ONFLEX™ S KA ONFLEX™ S KG Applications Fasteners/ Defining Characteristic High temperature sealing Ambient temperature sealing High temperature sealing Ambient temperature sealing Density 1.00 g/ml 0.99 g/ml 1.10 g/ml 1.13 g/ml Physical Properties Tensile Strength 6.0–10.0 MPa 5.0–11.5 MPa 3.0–7.5 MPa 2.6–4.9 MPa Tear Resistance 25.0–37.0 kN/m 21.0–43.0 kN/m 17.0–46.0 kN/m 16.0–29.0 kN/m Compression Set 73°F (23°C) 72hrs 12–27% 16–32% 13–23% 31–35% 158°F (70°C) 22hrs 28–44% 32–43% 29–38% 62–66% 212°F (100°C) 22hrs 45–53% 56–60% 54–57% 80–85% Hardness 40–80 Shore A 40–80 Shore A 40–80 Shore A 40–80 Shore A Overmolding Substrate Polypropylene/ Polyethylene Polypropylene Polyamide Polyamide Processing Injection Molding/ HOW GLS TPEs MAKE THE DIFFERENCE IN AUTOMOTIVE FASTENERS AND CLIPS • Low compression set – coupled with good stress relaxation, our automotive TPEs are designed to maintain a good seal over time and reduce noise generated by vibration • High temperature performance – Avient automotive TPEs provide good sealing performance in temperatures up to 100°C/212°F • Bonding performance - strong chemical bond to polypropylene, polyethylene, and polyamide • Process flexibility - grades can be both injection molded and extruded • Easy to color - can be colored at the machine • Reduced production steps - some grades do not require pre-drying • Low VOC/FOG - OnFlex HT™ has been externally tested to VDA 278 and is proven to help satisfy vehicle interior air quality (VIAQ) regulatory requirements • Single source supply – we can streamline your supply chain with the ability to provide polymer colorants, engineered thermoplastics, and thermoplastic elastomers from a single source • Global support - we provide production, technical, and commercial support in locations convenient to your operations, including North America, Europe, and Asia To learn more about GLS TPEs for automotive applications, visit www.avient.com or call +1.844.4AVIENT (1.844.428.4368).

Solutions that Support the Circular Economy REDUCED ENERGY USE CESA™ Dry Additives CESA™ Release Additives OnCap™ CTR Process Optimization ColorMatrix™ Joule™ & Smartheat™ Infrared Absorber Specialty Low Cure Inks SiteCool™ Infrared Absorption Technologies BIO-DERIVED CONTENT reSound™ OM Bio-Derived Thermoplastic Elastomers reFlex™ Bio-Derived Plasticizer OnCap™ Bio Additives OnColor™ Bio Colorants reSound™ Natural Fiber Reinforced Formulations LIGHTWEIGHTING Glasforms™ Pultrusion Technologies Polystrand™ Continuous Fiber Composites IMPROVED RECYCABILITY CESA™ IR Black Additives CESA™ Extend Additives ColorMatrix™ Lactra™ SX Light Blocking Additive for PET ColorMatrix™ Ultimate™ UV Light Barrier ColorMatrix™ Capture™ Oxygen Scavenger for PET ColorMatrix™ Triple A™ Acetaldehyde Scavenging Additives ColorMatrix™ Reprize™ IV Builder for PET OnColor™ IR Sortable Black for Recyclable Packaging Bergadur™ Post-Industrial Recycled Content Polyester Formulations Nymax™ PIR Post-Industrial Recycled Nylon Formulations Maxxam™ FR Flame Retardant Polyolefin Formulations Predictions Gartner predicts circular economies will replace linear economies in 10 years, noting that supply chain leaders must adapt to circular models in order to keep up in a marketplace with a growing emphasis on sustainability.