It is therefore a mandatory prerequisite for EU manufacturers and cable users to be in full compliance with EU Biocidal Product Regulation No. 528/2012. Cesa Aversive Technologies offer cable manufacturers and cable users the ability to be fully compliant with this regulation by incorporating an officially authorized masterbatch into cable jacketing materials. TECHNOLOGY BENEFITS • Helps provide long term cable protection against rats and termites • Enables manufacturers and cable users to be compliant with EU Regulations • Easy to use, direct incorporation in the jacket, no need for additional layer to protect the cable • Helps avoid unplanned service breakdowns with associated high repair costs 1 CA-Sept15-Doc.6.2- Final 2 A masterbatch should be regarded as a biocidal product if it is has a biocidal function.

KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number reducing risk of change • Non-phthalate and formulated without animal- derived substances • Available for use in a wide range of polymers including polyolefins, styrenics, polycarbonate and alloys, polyester, POM • Functionality can be combined with colorants into convenient combination concentrates and ready-to-use formulations REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) and/or Device Master File • Food contact established with FDA/EU* APPLICATION BULLETIN * FDA/EU compliance information available upon request FUNCTIONALITY TARGET APPLICATIONS DRUG DELIVERY DEVICES SYRINGES & NEEDLES DIAGNOSTICS CATHETERS Clarifying PP Sorbitol-free for transparent applications with reduced migration and improved thermal stability     Lubricant— permanent/ non-migrating Fast acting reduction in friction for wide variety of polymers such as PP, ABS, POM, PC Protection from UV in transparent applications for PP, PE, PETG, COP UV blocking in 290-450nm with no impact on clarity; can be combined with colors (e.g., amber)   Antistatic ready-to- use solution for PP, ABS, PC/ABS Permanent/non-migrating; fast decay time independent of % relative humidity  Gamma/e-beam sterilization protection of the polymer Preserving the properties of PP and COC/COP; reduction in yellowing using Color Compensation Technology (CCT) Reduced material consumption/cycle time—nucleation Fast acting new generation nucleant for PE and PP; improved thermal and mechanical properties allows wall thinning; reduction of tolerance/dimensional problems between different colors Laser marking replacing ink printing/labels Solvent-free, high-speed identification for Nd/YAG laser for PE,PP, ABS, PC, POM     Antioxidants for PE, PP, TPE Thermal protection during converting/downstream sterilization    Brand protection/ anticounterfeit Covert and non-covert systems   Healthcare use limitations apply—see below. It is the responsibility of the medical device manufacturer and the person placing the medical device on the market to ensure compliance of the medical device with all applicable laws and regulations, including the suitability of all raw materials and components used for its manufacture.

KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Non-phthalate and formulated without animal- derived substances • Available for use in a wide range of polymers including polyolefins, styrenics, polycarbonate and alloys, polyester, POM • Functionality can be combined with colorants into convenient combination concentrates or formulations REGULATORY SUPPORT • Pre-tested raw materials: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) • Food contact established with FDA/EU* APPLICATION BULLETIN * FDA/EU compliance information available upon request FUNCTIONALITY TARGET APPLICATIONS EBM/IBM CONTAINERS CLOSURES FILM COMBINATION DEVICES Clarifying PP Sorbitol-free—possibilities in packaging ocular solutions    Slip/torque reduction Slip for PE, PP films, processing aid, torque reduction for closures   Protection from UV in transparent packaging for PP, PE, PETG, COP UV blocking in 290–450nm with no impact on clarity    Antistatic ready-to-use solution for PE films e.g. It is the responsibility of the medical device manufacturer and the person placing the medical device on the market to ensure compliance of the medical device with all applicable laws and regulations, including the suitability of all raw materials and components used for its manufacture.

KEY CHARACTERISTICS • Designed for Nd:YAG lasers operating between 1060-1070 nm • Available for different polymers including PP, PE, PC, PBT, POM, ABS, MABS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Can be designed for dark marking on natural or white/light colored background or light marking on black/dark background REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) and/or Device Master File • Food contact established with FDA/EU* APPLICATION BULLETIN * FDA/EU compliance information available upon request. It is the responsibility of the medical device manufacturer and the person placing the medical device on the market to ensure compliance of the medical device with all applicable laws and regulations, including the suitability of all raw materials and components used for its manufacture.

Sustainability Spotlight Hydrocerol™ Chemical Foaming Agents Reflection electron microscopy (REM) view of foamed plastic Hydrocerol Chemical Foaming Agents are supplied as concentrates CHEMICAL FOAMING AGENTS (CFAs) are chemical substances that react under the influence of heat to release gas into the plastic matrix during the manufacturing process of plastic parts. The portfolio includes non-hazardous endothermic substances that require minimum cooling of the plastic parts after manufacturing. SUPPORT Our experts can offer product recommendations in the chemical foaming of plastics, taking into consideration: • Manufacturing process • Application polymer grades • Regulatory requirements (e.g., food contact compliance, toy regulations) • Targeted performance requirement (e.g., lightweighting, polymer use reduction, insulation, improved processing) They also provide technical assistance and best practices for using Hydrocerol Chemical Foaming Agents in the best conditions for a successful foaming of the plastic parts.

TECHNICAL BULLETIN ColorMatrix™ Joule™ Reheat Additive Proprietary IR Absorber ColorMatrix™ Joule™ reheat additive is a proprietary IR absorber manufactured and marketed by ColorMatrix worldwide for use in PET resin formulations suitable for carbonated soft drinks and beverage applications. Occasionally, technicians from the equipment manufacturers are used to establish the ‘entitlement’ performance of a particular machine and most major manufacturers have technical service teams to help with this activity.

Avient Corporation HQ Design and manufacture of colorants, compounds, and additive concentrates. 65536-95395Certificate No: Page 3 of 53 ABS Quality Evaluations, Inc. 1701 City Plaza Drive, Spring, TX 77389, U.S.A. Lahore, Punjab 54400 Pakistan Design & Manufacturing of Colour and Additive Concentrates. 65536-116872Certificate No: Page 22 of 53 ABS Quality Evaluations, Inc. 1701 City Plaza Drive, Spring, TX 77389, U.S.A. Water Street North Baltimore, OH 45872 Design and Manufacture of Custom PVC Plastisol and PVC Slush Mold Powder 65536-50633Certificate No: Page 33 of 53 ABS Quality Evaluations, Inc. 1701 City Plaza Drive, Spring, TX 77389, U.S.A.

Victorinox designed and manufactured its first knives more than 130 years ago, and their pocket knives have been officially issued to Swiss Army recruits since 1891. Designers conceptualized a new, larger version of the Soldier’s model, including 10 tools, a lock blade that can be opened with one hand and, importantly, a non-slip handle manufactured from a combination of hard and soft thermoplastics. THE IMPACT With our support, Victorinox was enabled to do what it does best—develop and manufacture high-quality tools that meet both military and consumer needs.

Testing is the sole responsibility of the final article manufacturer. Differentiation – Add color and texture to stand out from the competition • Recyclable – TPEs are compatible with most municipal recycle streams • Global Support – Avient is a global supplier with manufacturing and technical support in Europe, Asia and North America To learn more about chemical resistant GLS TPEs for packaging, contact Avient at +1.844.4AVIENT (+1.844.428.4368). Testing is the sole responsibility of the final article manufacturer.

Zwolseweg 1, 2994 LB, Barendrecht, Netherlands - TEL: +31(0)102922689. www.dnv.com/assurance Certificate No: 2997-2006-AQ-RGC-RvA Initial certification date: 08 June, 2006 Valid: 11 April, 2022 – 11 April, 2025 This is to certify that the management system of Polyone - Suzhou, China EM Sector, 77 Shenggang Street, Suzhou Industrial Park, Suzhou, Jiangsu, China, 215024 and the sites as mentioned in the appendix accompanying this certificate has been found to conform to the Quality Management System standard: GB/T 19001-2016/ISO 9001:2015 This certificate is valid for the following scope: Design and Manufacture of Plastic Compounding Material Certificate No: 2997-2006-AQ-RGC-RvA Place and date: Shanghai, 27 April, 2022 Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. Room 201, Building 20, No. 200 JinSu Road, Shanghai Free Trade Zone, China, 200131 Design of Plastic Compounding Material Polyone - Suzhou, China EM Sector, 77 Shenggang Street, Suzhou Industrial Park, Suzhou, Jiangsu, China, 215024 Manufacture of Plastic Compounding Material