PE Tarpaulin manufacturer PE TARPAULIN MANUFACTURER O U T D O O R T A R P S • Resist UV light degradation in European climates for an extended period • Maintain color stability • Enhanced UV resistance against UV degradation • Delivered colors stability with good light fastness • Provided cost effectiveness by combining colorant and UV solutions • Offered in-house Q-Lab UV (QUV) tester to meet strict customer standard / requirement Smartbatch Combination Colorants and Additives KEY REQUIREMENTS WHY AVIENT? https://www.avient.com/products/polymer-colorants/color-additive-combination-masterbatches/smartbatch-combination-colorants-additives Slide 1: PE Tarpaulin manufacturer

KEY CHARACTERISTICS • Derived from end-of-life tires • Available for multiple resins and custom solutions • Retains performance characteristics of traditional carbon black in plastics • Enhances sustainable product offerings • Provides long-term price stability • Passes REACH and RoHS requirements • Prop 65 letters available MARKET AND APPLICATIONS OnColor RC Environmental Black is a sustainable solution across a wide variety of industries and applications, including: • Automotive • Wire and cable • Building and construction • Appliances • Electrical and electronics • Industrial molding applications • Office furniture Avient OnColor RC Environmental Black is offered for multiple resins and also for custom solutions: CC10289240WE OnColor RC Environmental Black PE CC10284887WE OnColor RC Environmental Black TPU CC10287020WE OnColor RC Environmental Black PC CC10287026WE OnColor RC Environmental Black PS CC10287028WE OnColor RC Environmental Black PP CC10287033WE OnColor RC Environmental Black ABS www.avient.com Copyright © 2020, Avient Corporation.

TARGET APPLICATIONS Excelite IM chemical foaming additives (CFAs) are engineered for a wide range of injection molded polymers: olefins, PVC, polystyrene, PC/ABS and high heat applications. PP, PE, PS, PVC No Good Foam PP Better, larger cells with lower cell density in standard IM processes; suitable for cell nucleation in structural foam processing PP, PE, PS, PVC Yes Better FA-110 Best cell structure with higher cell density; provides better structural integrity and lower density in standard IM processes PP, PE, PS, PVC Yes Best KEY CHARACTERISTICS Excelite IM formulations provide injection molders with: • Material density and weight reduction • High concentration of active CFA • Improved distribution of CFA into polymer matrix • High cell density with tight cell structure • Control over consistency and accuracy • Reduced sink marks • Ability to improve flow of material • Cycle time reduction • Improved dimensional stability • Improved thermal insulation EXCELITE IM – PRODUCT FORMULATIONS www.avient.com Copyright © 2020, Avient Corporation.

• Abrasion resistance • High performance for consumer electronics applications MATERIAL DESCRIPTION HARDNESS COLOR OVERMOLD DENSITY (g/cm3) PROPERTY KEY CHARACTERISTIC Versaflex™ CE 3120-65 65A Natural/ Black PC, ABS, Copolyester 1.15 Soft touch, silky feel and good abrasion performance Silky feeling Versaflex™ CE 3130-70 70A Natural PC, ABS, Copolyester 1.04 Silky feel, long-term life, excellent abrasion resistance, performed UV and stain resistance, chemical resistance Non-blooming Versaflex™ CE 3130-80 80A Natural PC, ABS, Copolyester 1.08 Silky feel, good abrasion performance and UV resistance Non-blooming Versaflex™ CE 3320-70 70A Clear PC, ABS, Copolyester 1.08 Excellent UV resistance, blue jean stain Super UV resistance, blue jean resistance Versaflex™ CE 3320-80 80A Clear PC, ABS, Copolyester 1.15 Excellent UV resistance, blue jean stain Excellent UV resistance Versaflex™ CE 3140-65 65A Natural PC, ABS, Copolyester 1.00 Excellent abrasion resistance, chemical resistance, silky feel 5G transparent Versaflex™ CE 3140-90 90A Natural PC, ABS, Copolyester 1.01 Excellent abrasion resistance, chemical resistance, silky feel 5G transparent VIBRATION DAMPING ELASTOMERS MATERIAL DESCRIPTION HARDNESS COLOR OVERMOLD DENSITY Versaflex™ VDT 4201-35N 35A Natural PP 1.00  Versaflex™ VDT 4202-40B 40A Black PP 1.00 Versaflex™ VDT 5120-40 40A Natural Nylon 1.09 Versaflex™ XP 5130 -65 65A Natural PC/ABS 1.03 Versaflex™ CE 3310-80 80A Clear PC/ABS 1.15 Thermoplastic elastomers that dampen vibrations via energy transfer • Excellent vibration damping performance (reduce noise/shaking) • Adhesion to various plastics PC, PC/ABS, ABS, PP • Colorable and translucent grades available • Effective in thin films HEALTHCARE TPEs Avient has performance-grade materials that are compliant with USP VI, ISO 10993-4 and 10993-5. MATERIAL DESCRIPTION HARDNESS COLOR OVERMOLD DENSITY (g/cm3) APPLICATIONS Versaflex™ HC 2110-35N 34A Natural PP/PE 0.89 Resealing, Elastomeric closures for injection Versaflex™ HC 2110-57B 57A Black PP 1.01 Syringe Plungers Versaflex™ HC MT224 75A Clear PP 0.89 Medical tubing Versaflex™ HC BT218 67A Translucent — 0.89 Weldable biopharmaceutical tubing Versaflex™ CL 2242 43A Clear PP 0.89 Overmolding for Versaflex™ CL 2250 50A Clear PP 0.89 Overmolding for Versaflex™ OM 1040X 40A Natural/Black PC/ABS OM 0.92 Overmolding for Versaflex™ OM 3060 60A Clear PC/ABS OM 0.90 Overmolding for FOOD GRADE TPEs Thermoplastic elastomer suitable for use in contact with food • Made without bisphenol A (BPA), phthalates, or heavy metals; select grades compliant with FDA, EU10/2011 and China GB4806 • Resists bites and tears; many are tested and safe to use in microwaves and dishwashers • Can be overmolded to provide a soft touch grip and customized to specific comfort requirements including vibration and noise reduction • Can be injection molded and overmolded right onto a substrate including PP, ABS, etc For fatty foods and over 8% alcohol; conditions D–G) Dynaflex™ G2780C 84A Translucent PE 0.9 (Aqueous foods; Versaflex™ FFC 2882-50 50A Translucent PP 0.9 (Aqueous foods; EU 10/2011 N/A FFC 2882-70 70A Translucent PP 0.88 (Aqueous foods; EU FFC 2882-87 87A Translucent PP 0.88 (Aqueous foods; EU FFC 3882-70 70A Natural PETG, ABS, PC 1.1 (Aqueous foods; EU OM 9100 Series 30–50A Translucent PC/ABS 0.9 FDA 177.1210 N/A N/A Copyright © 2024, Avient Corporation.

Homepage // News Center // Avient Launches New reSound™ REC Thermoplastic Elastomers with Recycled Content for PC/ABS Overmolding Avient Launches New reSound™ REC Thermoplastic Elastomers with Recycled Content for PC/ABS Overmolding The new formulations are Avient’s first PCR-containing TPE technology developed primarily for overmolding polycarbonate (PC), acrylic butadiene styrene (ABS), and PC/ABS blends in applications from consumer electronics, cosmetics packaging, and personal care items to power tools and toys.

GENERAL PURPOSE GLS TPES FOR PACKAGING SOFT TOUCH GRIPS BONDING TO POLAR SUBSTRATES GENERAL PURPOSE GLS TPES FOR PACKAGING SOFT TOUCH GRIPS BONDING TO NON POLAR SUBSTRATES Dynaflex™ G2711 Dynaflex™ G2780 Dynaflex™ G6713 Dynaflex™ G7960 Versalloy™ XL9045 Versaflex™ CL40 Aesthetics Grippy, 43A Low tack, 84A Extra soft, 13A Rubbery, 60A & opaque Matte, 45A & natural Grippy, 40A & water clear Special Characteristics Grippy medical grade PP & PE OM Extra soft General purpose High flow & fast setup Water clear Regulatory FDA, EU & USP VI FDA FDA & EU FDA FDA FDA & EU Overmolding Polypropylene Polypropylene & Polyethylene Polypropylene Polypropylene Polypropylene Polypropylene Versaflex™ CL 2250 Versaflex™ OM 3060 Versaflex™ CE 3120-65 Versaflex™ CE 3620 Versollan™ RU 2205 Aesthetics Grippy, 50A & clear Grippy, 59A & clear Silky feel, 65A Silky feel, 65A Grippy, 65A Special Characteristics Clear overmold Clear overmold Abrasion resistance & high strength Low compression set & high flow Abrasion resistance & high strength Regulatory FDA & USP VI FDA & USP VI UL 94 FDA & ISO 10993-10 — Overmolding Polycarbonate Polycarbonate & ABS Polycarbonate, ABS, Copolyester & Nylon 12 Polycarbonate, ABS, Copolyester & Nylon 12 1.844.4AVIENT www.avient.com Copyright © 2020, Avient Corporation.

Grades are available for polyolefins, PP, PC/ABS, ABS, PA6— filled and reinforced polymers included—and others on request. Extrusion-specific concentrates are available for most common packaging resins, including PP, PE, PS, PET, and PLA. Grades are available for polyolefins, ABS, PS, PA6, and others on request.

Base Resin ABS PA PBT PC PE PEEK PP PPS Barrel Temperatures °F (°C) Rear Zone 400–475 (200–250) 480–540 (248–282) 480–520 (250–270) 480–570 (250–300) 400–445 (200–230) 660–700 (350–475) 400–440 (200–225) 520–600 (270–300) Center Zone 410–480 (205–253) 490–550 (254–287) 485–525 (251–273) 500–580 (260–305) 410–455 (207–237) 670–710 (357–385) 410–450 (205–230) 550–610 (285–310) Front Zone 420–490 (210–257) 500–560 (260–293) 490–530 (254–276) 515–590 (267–310) 420–465 (213–243) 680–720 (363–400) 420–455 (215–235) 570–620 (300–320) Nozzle 425–500 (215–260) 530–600 (275–315) 700–730 (370–395) 430–460 (220–240) 610–620 (320–325) Melt Temperature 425–515 (215–270) 530–615 (275–325) 430–495 (220–260) 700–725 (370–385) 610–635 (320–335) Mold Temperature 140–200 (60–90) 150–300 (65–148) 140–280 (60–137) 160–240 (70–115) 300–400 (150–200) 190–300 (90–150) Drying Parameters 190 (90) 2–4 Hours 0.01%–0.15% 180 (82) 4–5 Hours 0.10%–0.20% 275 (135) 0.02%–0.04% 250 (125) 0.02% 300 (150) 0.10% 280 (135) 2–3 Hours 0.01%–0.20% Nozzle Type General Purpose Nylon or Reverse Taper General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Injection Velocity1 2–5 in/sec; 50–127 mm/sec Injection Pressure Medium to high (may range from 1,000–4,000 psi; 7-28 Mpa) Back Pressure 50–100 psi; 0.3–0.7 Mpa Screw Speed 25–75 RPM Cushion 0.125–0.250 in; 3–6 mm Screw Compression Ratio2 2.0:1–2.5:1 Processing Guide 3 Base Resin ABS PA PBT PC PE PEEK PP PPS Barrel Temperatures °F (°C) Rear Zone 400–475 (200–250) 480–540 (248–282) 480–520 (250–270) 480–570 (250–300) 400–445 (200–230) 660–700 (350–475) 400–440 (200–225) 520–600 (270–300) Center Zone 410–480 (205–253) 490–550 (254–287) 485–525 (251–273) 500–580 (260–305) 410–455 (207–237) 670–710 (357–385) 410–450 (205–230) 550–610 (285–310) Front Zone 420–490 (210–257) 500–560 (260–293) 490–530 (254–276) 515–590 (267–310) 420–465 (213–243) 680–720 (363–400) 420–455 (215–235) 570–620 (300–320) Nozzle 425–500 (215–260) 530–600 (275–315) 700–730 (370–395) 430–460 (220–240) 610–620 (320–325) Melt Temperature 425–515 (215–270) 530–615 (275–325) 430–495 (220–260) 700–725 (370–385) 610–635 (320–335) Mold Temperature 140–200 (60–90) 150–300 (65–148) 140–280 (60–137) 160–240 (70–115) 300–400 (150–200) 190–300 (90–150) Drying Parameters 190 (90) 2–4 Hours 0.01%–0.15% 180 (82) 4–5 Hours 0.10%–0.20% 275 (135) 0.02%–0.04% 250 (125) 0.02% 300 (150) 0.10% 280 (135) 2–3 Hours 0.01%–0.20% Nozzle Type General Purpose Nylon or Reverse Taper General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Injection Velocity1 2–5 in/sec; 50–127 mm/sec Injection Pressure Medium to high (may range from 1,000–4,000 psi; 7-28 Mpa) Back Pressure 50–100 psi; 0.3–0.7 Mpa Screw Speed 25–75 RPM Cushion 0.125–0.250 in; 3–6 mm Screw Compression Ratio2 2.0:1–2.5:1 Comments 1. PC Compounds: 0.001"–0.002" depth and 0.250" width PC/PSU Compounds: 0.002"–0.003" depth and 0.250" width PES Compounds: 0.003"–0.004” depth and 0.250" width PEI Compounds: 0.001"–0.003” depth and 0.250" width PP Compounds: 0.001"–0.002” depth and 0.250" width ABS Compounds: 0.0015"–0.0025” depth and 0.250" width PEEK Compounds: 0.002"–0.004” depth and 0.250" width Nylon Compounds: 0.002" min. depth and 0.250" width Increase vent depth to 1.0mm (0.040") at 4.0mm (0.250") away from the cavity and vent to atmosphere.

母粒和预着色料可用于多种聚合物，包括PE， PP，PEBA，PC，ABS等。™ 在三个通过ISO 13485认证的医疗产线生产 全球统一的配方，提供全球一致性和供应链 保障 提供文件化的变更控制 原料指纹图谱和常规批次测试 多种标准颜色缩短产品开发时间 产品组合里符合标准的颜色用于：- 注射针头ISO 6009 - 眼科容器盖（美国眼科学院 / AAO - American Academy of Ophthalmology） 颜色 潘通色 参照 PE 基料 PP 基料 透明PP 基料 PEBA 基料 PC 基料 ABS 基料* — PE0M176031 PP0M176045 ** AH0M415001 NC0M176058 ** SB0M665206 102C PE1M176076 PP1M176060 PP1M176062 AH1M415002 NC1M176058 NC1M176059 SB1M664958 158C PE2M176044 PP2M176046 ** ** NC2M176044 NC2M664912 SB2M664939 199C PE3M176131 PP3M176111 PP3M176113 AH3M415002 NC3M176116 NC3M176122 SB3M665037 196C PE3M176130 PP3M176109 ** AH3M415001 NC3M176117 NC3M665052 SB3M665039 2593C PE4M176023 PP4M176036 PP4M176039 AH4M415001 NC4M176038 NC4M176044 SB4M664978 292C PE5M176155 PP5M176169 ** AH5M415003 NC5M176142 ** SB5M665402 285C PE5M176154 PP5M176171 PP5M176175 AH5M415002 NC5M176143 NC5M176146 SB5M665404 288C PE5M176153 PP5M176173 ** ** NC5M176144 ** SB5M665406 346C PE6M176128 PP6M176111 ** ** NC6M176118 ** SB6M665070 3145C PE6M176126 PP6M176115 ** ** NC6M176119 ** SB6M665068 348C PE6M176127 PP6M176113 PP6M176118 AH6M415001 NC6M176120 NC6M176121 SB6M665072 425C PE7M176066 PP7M176091 PP7M176094 ** NC7M176124 ** SB7M665297 Cool Gray 5C PE7M176067 PP7M176089 ** AH7M415001 NC7M176125 NC7M665175 SB7M665295 7502C PE8M176048 PP8M176058 ** ** NC8M176058 ** SB8M664871 463C/731C PE8M176049 PP8M176060 ** ** NC8M176059 ** SB8M664869 Black C PL9M176008 PP9M176017 ** ** NC9M176008 NC9M176009 SB9M664896 颜色可能与显示的实际颜色有所不同。

功能 目标应用 血液采集 试剂容器/ 试剂盒 移液器/ 器具 设备/配件 即用型配方避免对分析测试的干扰； 可萃取金属数据          聚合物对激光能量的激活可提供高 对比度、无溶剂的 高速鉴别     定制母粒和即用型配方可提供 透明和不透明颜色，同时允许激光 传输/吸收    PE和PP的新一代快速成核剂；提 高尺寸稳定性，热性能和机械性能  降低湿蒸汽透过率（MVTR） HDPE即用型配方 吸湿母粒 减少 BCT（血液收集管）中因氧传 输造成的真空损失，并保护试剂免 受氧化降解 在290-450nm波长范围内阻挡紫 外线，对透明度没有影响；保护光 敏试剂     自检/即时检验 （POCT） 用于实验室自动化/ 鉴别编码的着色剂 颜色—低迁移/减 低干扰 颜色—生物相容 性评估 透明PP PP、ABS、 PC/ABS的抗静电 性能 激光焊接可 快速、可靠地组装 一系列聚合物 半结晶聚合物 的成核剂，例如 HDPE、PP、POM 防止氧气进入的 PET吸氧剂 透明容器（PP、 PE、PETG、COP） 中的紫外光防护 防潮以改善屏障 激光打标的UDI替 代油墨印刷/贴标 PP、ABS、PC和 高温聚合物的颜 色，符合UL认证 为各种聚合物提供多种颜色，能够 为您的工艺提供适用的即用型配方 或母粒 降低不符合现行和拟定法规（如 IVDR）的风险 即用型解决方案/母粒支持针对电器 外壳的UL要求 永久性/非迁移性即用型配方；不受 相对湿度（%）影响的快速静电衰 减时间 不含山梨醇，最大限度地减少潜在 迁移 1.844.4AVIENT www.avient.com 版权所有© 2021埃万特公司。