X HC-2937-001-1 Natural GREEN (FDA) 484-1071-1 YELLOW 486-30328-1

General-purpose screw with compression ratio of 2:1 to 3:1 can be used Suggested nozzle diameters are 1/16" (0.0625" or 1.59 mm) to 3/16" (0.1875" or 4.76mm) To achieve the benefits of shear thinning the injection speed should be adjusted to fill the mold in 1 - 3 seconds.

Scope 1: direct emissions that are typically the most manageable for polymer manufacturers. 1. Scope 3 emissions are more indirect than Scope 1 and 2 because they include upstream and downstream activities. 

September 1 November 1 1)

Get Help Now +1-866-737-2066 TiO₂ content of

Investor Relations Contact: Joe Di Salvo, Vice President, Treasurer and Investor Relations, Avient Corporation, +1 440-930-1921 giuseppe.disalvo@avient.com; Media Contact: Kyle G. Rose, Vice President, Corporate Communications, Avient Corporation, +1 440-930-3162 kyle.rose@avient.com

With long fiber reinforced solutions, the individual reinforcing fibers within each pellet are aligned parallel to each other and are exactly as long (usually 1/2 inch or 12 mm) as the pellet due to the unidirectional orientation of the fiber prior to pellet chopping. Fibers typically 0.04 in/1 mm long 

The effective date of the replacement sections was deferred to December 1, 2025 when USP 661 will be replaced by USP 661.1 and USP 661.2. In the interim, testing under USP 661.1 and USP 661.2 is permitted by USP, and packaging systems conforming to these requirements prior to December 1, 2025 are considered to be in conformance with the USP–NF.  

The new ECCOH™ XL Cross-Linkable Solutions for photovoltaic cables are REACH compliant and rated for permanent outdoor use with good UV and weather resistance, passing Arrhenius lifetime prediction tests as per IEC 60216-1. They also have good electrical performance, are compatible with either DC or AC power supply, and pass flame retardant performance to EN 50618 and IEC 60332-1 standards.  

WHITE 660 AD-1 RED 1077 AD-1 Shipment Notification - under "Material Header" MSDS - labeled as the "Product Number" (in Section 1)